10 Best Charger Tp4056 Micro In The Us - Black Friday 2024
Best Choice1
![Adafruit Micro Lipo - USB LiIon/LiPoly Charger [ADA1304]](https://cdn.gusav.com/8221dfa3/loader.svg)
AdafruitAdafruit Micro Lipo - USB LiIon/LiPoly Charger [ADA1304]
Main highlights- There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy.
- The MicroLipo charger can get hot during charging. Grab it by the sides and unplug then let cool before removing the battery - take care not to touch the components during charging! Batteries not included.
- Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end.
- For use with Adafruit LiPoly/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity or pinout.
- Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the back, for when you'll only be charging batteries with 500mAh size or larger.
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Atnsinc15pcs 5V 1A TP4056 Charging Module Type-C USB 18650 Lithium Battery Charger Board with Protection (Type-C USB)
Main highlights- Power Indicator: Red is charging, Green is fully charged.
- Package includes:15*TP4056 Type-C USB Charging Module
- Note:Please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.
- Input Voltage: 5V; Max output current: 1A; Charging cut-off voltage: 4.2V ± 1%; Input interface: Type-C USB
- Application:It can charge for single-cell lith ium battery or multi-section parallelled lith ium batteries, can be powered by USB ports; The module with usb port, can be directly input to do with rechargeable lith ium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.
9.7Exceptional
View offer on:
Show more
3
CHENBOCHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Main highlights- Maximum charge current: 1000mA
- Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery
- Input voltage: 5V
- Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
- Charging cut-off voltage: 4.2V ± 1%
9.6Exceptional
View offer on:
Show more
4
HiLetgoHiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board TP4056 Lithium Battery Charging Board Micro USB Charge Module With Protect
Main highlights- Maximum charge current: 1000mA
- Input Voltage: 5V
- HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board
- Charging cut-off voltage: 4.2V ± 1%
9.5Excellent
View offer on:
Show more
5
Holy FeatherHoly Feather TP4056 Charging Module 5V Micro USB 1A 18650/16340/21700/26650/14500 Lithium Charging Board with Protection Charger Module with Dual Protection Function 6Pcs Micro
Main highlights- Features overcharge protection, over-discharge protection, short-circuit protection, and reverse polarity protection
- Features overcharge protection, over-discharge protection, short-circuit protection, and reverse polarity protection
- Efficient and reliable charging for your devicesnverter module/buck converter module or other loads
- Compact and lightweight design for easy use and storage
- Charges 1 cell lithium ion or lithium polymer batteries with a maximum charging current of 1A
9.3Excellent
View offer on:
Show more
6
AITRIPAITRIP 10pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions (10pcs TP4056 Type-c USB)
Main highlights- Maximum charging current output: 1000mA
- Input interface: Type-c USB
- Charging cut-off voltage: 4.2V ± 1%
- Battery: over-current protection current 3 A
- Battery overcharge lifting voltage: 4.00 V
9.1Excellent
View offer on:
Show more
7
ComidoxComidox 20PCS 18650 TP4056 Lithium Battery Charging Board Micro USB Charger Module 5V 1A with Overcharge Over-Discharge Protection
Main highlights- Using the very mature charging chip TP4056, the peripheral circuit is simple, the protection performance is good, and the charging accuracy is high.
- This module is fully mechanically automated and fully fabricated. Each module is tested before shipment and has high reliability.
- The current can be adjusted. It is very convenient to change the output to 100mA-1000mA by changing the fixed resistance in the board.
- Power indicator: Red for charging and green for full charge.
- For single-cell lithium or multi-section parallel lithium battery charging, the charging port can be powered from USB.
9.0Excellent
View offer on:
Show more
8
ABSOK6 Pcs Battery Charger Module USB TP4056 3.7V 4.2V to 9V 5V 2A Charge Discharge Integrated Step Up Module,18650 Lithium Li-ion Battery Charger Module
Main highlights- Small and delicate: 1.3 in x 0.92 in/33 mm x 23 mm
- Package contains: 6 * Lithium Li-ion Battery Charger Module
- Material: Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging
- Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery
- Features: Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device
8.9Very Good
View offer on:
Show more
9
Crazepony1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors
Main highlights- USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
- The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.
- Support 0.2A/0.6A charge current by switch button （ Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2）
- ONLY support LiPo 3.7V/4.20V 1S battery
- Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
8.8Very Good
View offer on:
Show more
10
MakerFocusMakerFocus 15pcs TP4056 Charging Discharging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board
Main highlights- Usage: The +/- pads are the power inputs, access to 5V. B+ connects to the positive pole, B- connects to the negative pole, OUT+ and OUT- connects to the loads, such as connecting to the positive and negative pole of the mobile booster board or other loads
- Upgrade Version: The input has a Type C female connector, which can be directly input as a mobile phone charger to recharge the lithium battery; The input voltage wiring pad is also reserved, which can be very convenient for DIY
- Reminder: Please check all the connections before charging, it will be damaged if the load OUT on the positive and negative with wrong polarity. If you do this the first time, please watch the video on Youtube before installation
- Note: When first accessing the battery, there may be no voltage output between OUT+/OUT-, at this time access to 5V charging can activate the protection circuit, the battery is disconnected from B+/B- and then connected again also need to be charged to activate the protection circuit. When using a mobile phone charger as input, the charger should be able to output 1A or above, otherwise it may not charge properly.
- Attention: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly
- Application: TP4056 module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports; The module with USB port, can be directly input to do with rechargeable lithium battery as a phone charger
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for charger tp4056 micro
