10 Best Car Styling Side Lip In The Us - Black Friday 2024
Xotic Tech Front Bumper Lip Chin Spoiler+ 2M Side Skirt Winglets Diffusers+ Adjustable 10"-13" Support Rod Universal Fit Most Vehicles, Glossy Black w/Red
Main highlights- Special Design: DIY installation, different cool style reveal no matter you install the detachable Red spoiler or not. Stereoscopic design, fluid curve surface with the special Reinforcing Design on the back of the spoiler, physically strong firm and durable, anti-collision and scratch-resistant. The front bumper lip support rods are used to reinforce your front splitter or rear diffuser. You can extend its length from 10 inches to 13 inches.
- Note: Please measure the position you are going to install the package, and make sure the products will fit your vehicle before purchase. The Side Skirts Extension may need to be trimmed in order to fit well. Product may require drilling holes and use the screws to permanently secure and Professional installation is highly recommended. (The packaging box shown is for illustration purposes only, actual packaging may vary)
- Material: The Front Bumper Lip Chin Spoiler Body Kits and The Side Skirt Rocker Extensions Splitters made of updated durable and sturdy ABS, no deformation in long-term use, physically strong firm and durable, anti-collision and scratch-resistant. The Front Bumper Lip Splitter Strut Rod Bars made with premium quality aluminum alloy, wear-resistant, scratch-proof, dust-proof, and upgraded protection, not only protection but also give you a luxury look.
- Function: Clean lines and stereoscopic design, fluid curve surface. Perfectly improve the sporty appearance, give your vehicle an aggressive racing look, also protect from scrapes from driveways, speed bumps and curbs, alleviate the damage.
- Before Buying: Please measure the size of the front bumper and check your cars inner mudguard fender to make sure there is space to install (drilling) the front bumper splitter. (As a reference, 70.9" bumper width can fit). Note that the following cases are not applicable: if the original car have a front lip installed, the bottom of the front bumper is not flat enough or the front is too sharp.
- Curious about how we select the top products for you? Explore How It Works
Evargc Black & Red Universal 69" - 73" Adjustable Car Front Bumper Lip Splitter Chin Spoiler Body Kit with 86.6" Side Skirt Extension Rocker Panel and Rear Bumper Lip Diffuser Compatible Most Vehicle
Main highlights- HIGH-GRADE MATERIAL: Made of premium quality Acrylonitrile Butadiene Styrene (ABS) plastic,No deformation after long-term use, strong physical strength, durable, anti-collision, anti-scratch.
- ELEGANT APPEARANCE: Gives you a sporty and personalized look, beautifies the appearance of your vehicle, protects from scrapes from driveways, speed bumps, and curbs, and alleviates damage.
- EASY TO INSTALL: Installation Manual & Hardware are Included. Professional Installation Is Highly Recommended.
- COMPATIBLE MOST VEHICLE: Mazda, Subaru, Nissan, VW, Lexus, Kia, Hyundai, Audi, BMW, Benz, Ford, Honda, Toyota, (You can contact us if you have any concerns).
- Before purchasing, please measure the dimensions of your front bumper and check your car's interior fenders to ensure there is room to install (drill) a front bumper splitter. (For reference, a 69-inch - 73-inch bumper width will fit). The following conditions do not apply: if the original car is equipped with a front lip, the bottom of the front bumper is not flat enough or the front end is too pointed. if the side skirts are too long, the excess can be cut off with a hacksaw. For a better look, sand the seams after cutting.
TOBENBONE 2 PCS Rear Bumper Canard Diffuser, Anti-Collision Front Bumper Lip Protector Kit, Universal Car Body Decoration Strip for Lip Splitter Valence Spoiler Side Fender Skirt Lip (Carbon Fiber)
Main highlights- 【Stable Driving】: This car rear bumper diffuser can absorb the impact force in the air when you are driving at high speed, thereby improving the traction of the wheels on the ground, allowing you to control the car more stably and drive safer.
- 【Package List】: You will get 2 pieces of rear lip wrapping angle separators, 6 pieces of screws. NOTE: If your car does not have the appropriate holes, you will need to drill holes to attach to your bumper.
- 【Fashionable Decoration】: The three-dimensional shape of the car side skirt cover is matched with smooth curves, which is very cool and can effectively decorate your car and enhance the racing style. At the same time, it also shows your unique taste and attracts more attention wherever you go.
- 【Exquisite Craftsmanship】: This rear bumper canard diffuser is made of high-quality ABS material, which is waterproof and scratch-resistant, wear-resistant and durable, not easy to deform and break, and can withstand the test of extreme weather. The surface is polished and very delicate. It is a perfect accessory for your car.
- 【Anti-Collision】: The car side fender skirt lip protector can provide comprehensive protection for your car, effectively protecting the bumper from collision damage or scratches in tight parking spaces or traffic jams.
WeFoonLo Universal Car Front Bumper Spoiler Rubber Sticker Lip Splitter Body Skirt Protector, 2.5M/8.2ft (Black)
Main highlights- Wide Application: Length: 2.5M/8.2ft, Width: 60mm/2.4inch, universal fit for most cars, trucks, SUVs, Length is adjustable to your cars
- Multi-function: Reduce the reversing flow when car driving, increasing the down force of the car make the car more stable for reducing fuel consumption
- High Quality: Flexible TPVC material, smooth and delicate cross-section, protect cars from collision and alleviate the damage
- Easy Installation: Come with quality 3M automotive tape, requires no special skills or tools; Can stick it on front or rear bumper, body kit, side skirt, tail fins and so on
- Durable & Bendable: Guard protection bumper spoiler rubber skirt, anti-scratch and decorative, allows you to install this lip on the lower bumper
Evargc Black & Red Universal 63"-70" Front Bumper Lip Splitter Chin Spoiler Body Kit with 29" Side Skirt Extension Rocker Panel and Rear Bumper Lip Diffuser + Rod Compatible Most Vehicle
Main highlights- HIGH-GRADE MATERIAL: Made of premium quality Acrylonitrile Butadiene Styrene (ABS) plastic,No deformation after long-term use, strong physical strength, durable, anti-collision, anti-scratch.
- ELEGANT APPEARANCE: Gives you a sporty and personalized look, beautifies the appearance of your vehicle, protects from scrapes from driveways, speed bumps, and curbs, and alleviates damage.
- EASY TO INSTALL: Installation Manual & Hardware are Included. Professional Installation Is Highly Recommended.
- COMPATIBLE MOST Midsize Sedans VEHICLE: Mazda, Subaru, VW, Lexus, Kia, Hyundai, Audi, BMW, Benz, Ford, Honda, Toyota (You can contact us if you have any concerns).
- Before purchasing, please measure the dimensions of your front bumper and check your car's interior fenders to ensure there is room to install (drill) a front bumper splitter. (For reference, a 63-inch - 70-inch bumper width will fit). The following conditions do not apply: if the original car is equipped with a front lip, the bottom of the front bumper is not flat enough or the front end is too pointed. if the side skirts are too long, the excess can be cut off with a hacksaw. For a better look, sand the seams after cutting.
Xotic Tech Front Bumper Lip Spoiler + Side Skirt Splitter + Rear Bumper Lip Wrap Splitter Canard
Main highlights- This is a x Xotic Tech Trademark Brand product, exclusively available at Xotic Tech.
- Stereoscopic design, fluid curve surface
- No block to the front ground clearance, effectively enhance the side extension
- Material: Premium quality ABS
- 1 set of Front Bumper Lip Chin Spoiler Guard Body Kits (3pcs) + Side Skirt Splitter (2pcs) + Rear Bumper Lip Wrap Splitter Canard (2pcs)
Evargc Universal Car Front Bumper Lip Spoiler Body Kits + 2M / 86.6" Car Side Skirt Extension Rocker Panel Body Kit + 48CM Car Auto Rear Bumper Lip Diffuser (Glossy Black)
Main highlights- HIGH-GRADE MATERIAL: Made of premium quality Acrylonitrile Butadiene Styrene (ABS) plastic,No deformation after long-term use, strong physical strength, durable, anti-collision, anti-scratch.
- ELEGANT APPEARANCE: Gives you a sporty and personalized look, beautifies the appearance of your vehicle, protects from scrapes from driveways, speed bumps, and curbs, and alleviates damage.
- Before purchasing, please measure the dimensions of your front bumper and check your car's interior fenders to ensure there is room to install (drill) a front bumper splitter.
Gloss Black Bumper Lip Spoiler Splitter Fit for 1997-2002 2010-2021 Chevy Camaro LS LT1 SS Coupe Convertible Front Rear Body Kit Side Skirt (Red Front Lip)
Main highlights- 5. Enhanced front bumper lip, can withstand strong winds at high speeds.
- 4.Colour: Painted gloss black finish will present a sense of luxury, which can well decorate the appearance of your car and make it more attractive. And the mirror effect will not fade out and the surface is always smooth. It’s easy to clean thanks to its smooth surface.
- 3.High Quality Material: The product are made of high quality PP plastic. It is a new brand material that can be anti-aging , ant rust and anti corrosion.
- 2.Kit contents: 4x Front Lip Chin Bumper Body Kits, 2x Side Skirts, 2x Rear Lip, 2x Strut Splitter Rods, 1x Screws kit
- 1.Fitment: Bumper lip spoiler splitter compatible with 1997 1998 1999 2001 2001 2010 2011 2012 2013 2013 2014 2015 2016 2017 2018 2019 2020 2021 2021 Chevy Camaro LS LT1 LT SS ZL1 Coupe 2-Door LT1 LT SS ZL1 Convertible 2-Door.
goodfitment Universal Front Lip for Car,Glossy Black Front Bumper Lip, ABS Adjustable Sharp Corner Front Bumper Lip Splitter Protector Replacement for Most Vehicle (Glossy Black w/Black)
Main highlights- 𝗨𝗽𝗴𝗿𝗮𝗱𝗲 𝗮𝗻𝗱 𝗣𝗿𝗼𝘁𝗲𝗰𝘁 𝗬𝗼𝘂𝗿 𝗖𝗮𝗿: Installing goodfitment Universal Front Bumper Lip not only upgrades the look of your car but also protects it from scratches and minor impacts. The durable construction ensures long-lasting performance, while the smooth surface helps your car move smoothly on the road.
- 𝗨𝗻𝗶𝘃𝗲𝗿𝘀𝗮𝗹 𝗙𝗶𝘁: goodfitment Universal Front Bumper Lip is designed to fit most vehicles, making it a versatile choice for car owners. Whether you drive a Honda Civic or any other vehicle, this front lip will easily enhance the look of your car.
- 𝗦𝘁𝘆𝗹𝗶𝘀𝗵 𝗮𝗻𝗱 𝗚𝗹𝗼𝘀𝘀𝘆 𝗕𝗹𝗮𝗰𝗸 𝗗𝗲𝘀𝗶𝗴𝗻: With its glossy black finish, goodfitment Front Bumper Lip adds a touch of style and elegance to your vehicle. Its sleek design complements the overall aesthetics and gives your car a more aggressive and sporty appearance.
- 𝗦𝗵𝗮𝗿𝗽 𝗖𝗼𝗿𝗻𝗲𝗿 𝗦𝗽𝗹𝗶𝘁𝘁𝗲𝗿 𝗣𝗿𝗼𝘁𝗲𝗰𝘁𝗼𝗿: goodfitment Front Bumper Lip comes with sharp corner splitters that provide added protection to your car. These splitters act as barriers, shielding your bumper from potential damages caused by curbs, speed bumps, or other obstacles.
- 𝗔𝗱𝗷𝘂𝘀𝘁𝗮𝗯𝗹𝗲 𝗔𝗻𝗴𝗹𝗲 𝗳𝗼𝗿 𝗘𝗻𝗵𝗮𝗻𝗰𝗲𝗱 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲: goodfitment Front Lip features an adjustable angle design, allowing you to customize it according to your preferences. By adjusting the angle, you can improve the aerodynamics of your car and optimize its performance on the road.
TOMICOB 4Pcs Front Bumper Lip Chin Spoiler Splitter Diffuser Air Dams Fit 72.2" Width Cars with 6Pcs 78.7" Side Skirts Extension Rocker Panels + 2Pcs Adjustable 8-11" Splitter Rods, Glossy Black w/Red
Main highlights- 【Well Protection】Provide anti-collision protective experience to your original bumper, protect from scrapes from driveways, speed bumps and curbs, alleviate the damage. Reduce wind resistance, prevent your cars from collision and alleviate damage, and protect original bumper from road bumps and scratch.
- 【Tips】Before purchasing our front lip body kit, please measure your front bumper size to make sure the front lip will fit on your car (72.2" bumper width will fit). Our side skirt is 2m/78.7" long, if too long, you can use a hacksaw to cut off the excess, you can sand the seams after cutting for a better look. NOTE: This front lip will not fit if the car was originally equipped with one, and if the bottom of the front bumper is not flat enough or the front end is too pointy.
- 【Improving Appearance】Stereoscopic design, fluid curve surface with the special reinforcing design on the back of the spoiler. Special double-color design dramatically Improves the sporty appearance and enhance the visual effect. Perfectly decorate your dear car and give your car a more aggressive and racing appearance in a minute.
- 【High Quality Material】Front lip and side skirt made of updated ABS plastic, and splitter rod made of aluminum. Exquisite paint through strict quality control standards to build and test. Strict factory QC test, high quality guaranteed, durable and color will not fade out.
- 【Easy to Install】Correct connector no cutting or splicing but require: Drilling holes can pre-drilled / marked on item's surface. Professional installation is highly recommended. Application of double sided tape may provide more stability and very highly recommended (INCLUDED DOUBLE SIDED TAPE).
Black Friday Sale
Deal ends in
HrsMinSec