10 Best Breadboard Adapter Esp In The Us - Black Friday 2024
Best Choice1
whiteeeenwhiteeeen for ESP32 Super Breakout Board 3.81mm / 0.15" Terminal GPIO Expansion Board 3 Types Outputs for ESP32-DevKitC ESP-WROOM-32 Block PCB
Main highlights- for ESP32 GPIO expansion board 38Pin with 3 types output.
- The dual-row input bus allows you to plug in 0.9 "or 1.0" ESP32 modules for maximum compatibility.
- Professional design, powerful and flexible, durable.
- Each pin has 3 leads, you can insert the 2.54 DuPont male or female, or you can use the terminal directly to access the bare wire.
- 3 Types Output: 2.54mm(0.1") Male Pin Header, 2.54mm(0.1") Female Pin Header and 3.81mm(0.15") Terminal Blocks.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
minidodocaMinidodoca Upgraded Electronics Component Fun Kit Power Supply Module, Jumper Wire, 830 Breadboard, LED,Capacitor,Diode,Resistor,Transistor,Compatible Raspberry Pi, STM32
Main highlights- The products are all tested and then divided to ensure that each component works properly to the maximum extent possible.Use process has any questions, please contact our customer service.
- Power module with 5.5MM * 2.5MM input interface, you can choose 9v 1A adapter as input or choose 9v battery as input (the battery needs to buy their own)
- Minidodoca Electronics Fun Kit - The upgraded kit not only power adapter but also has more component specifications, it comes with commonly used sensors and components. Compatible with Raspberry Pi, it can meet almost all your needs.
- LED working voltage 2.2V-3.4V, power module output is 3.3V,5V, please connect series buck resistor to avoid damage when using.4 digital tube display is common anode, please pay attention to the wiring rules when using。
- Kit includes:9v1A power supply Adapter+ Breadboard Power Supply Modules+Battery Clip+830 Breadboard+DuPont wire+ IC 4N35, IC 74HC595，IC 74HC138+4-digit digital tube display+12 values Capacitor+Alligator clip+Banana Plug+10 values Resistor+5 values LED+buttons+Buzzer+Precision Potentiometer+ Thermistor+RGB LED+ Photoresistor+Pin header+Transistor+Diode etc.
9.6Exceptional
View offer on:
Show more
3
DIYmallDIYmall ESP8266 ESP-01 Breakout Board ESP-01S Breadboard Adapter PCB Board for Serial WiFi Transceiver Network Module(Pack of 5pcs)
Main highlights- 5,What you will get is: 5 X ESP-01S adapter board.
- 4,Onboard 0.1µF decoupling capacitor makes the esp01 esp01s wifi module always run smoothly without a hitch.
- 3,This breakout offers clear pinout silkprint on top and will nicely fit your prefered breadboard
- 2,This breadboard adapter will help you to make prototyping with ESP-01 ESP-01S wifi module much easier.
9.5Excellent
View offer on:
Show more
4
whiteeeenwhiteeeen 8pcs ESP8266 Breakout Board ESP-01S Breadboard Adapter 2 Types Output for Serial WiFi Transceiver Network Module
Main highlights- With 2 types output, 3.5mm terminal connector and 2.54mm male pin header connector.
- It will help you to make prototyping with ESP-01 ESP-01S wifi module much easier.
- ESP8266 ESP01S Breakout Board
9.4Excellent
View offer on:
Show more
5
naughtystartsnaughtystarts for ESP32 Breakout Board 3.5mm / 0.14" Terminal GPIO Expansion Board for 0.9" / 1.0" Size ESP32 Module ESP-WROOM-32 ESP32-DevKitC (Pack of 2pcs)
Main highlights- for ESP32 GPIO expansion board 38pin with terminal.
- The dual-row input bus allows you to plug in 0.9 "or 1.0" ESP32 modules for maximum compatibility.
- Shrapnel Screw Terminal: 3.5mm / 0.14" Pitch
- It's suitable for 18~24AWG cable connection, easy to use.
- It's fully assembled, no soldering required.
9.3Excellent
View offer on:
Show more
6
StemeduStemedu ESP8266 ESP-01 Adapter ESP01 Breakout Board for ESP01S Wireless Serial WiFi Transceiver Network Module, Combo 10.
Main highlights- 🚩 You can easily remove this capacitor with a screwdriver (permanently) and then it can be used with nRF24 modules too. The nRF24 Vcc and Gnd pins are at different locations so this capacitor must be removed for it to work. If you still need a capacitor for it, you can always add an external one.
- 🚩 This esp01 breakout board offers clear pinout silkprint on top, fit for Breadboard, it will help you a lot in your projects.
- 🚩 This breadboard adapter is for the popular ESP-01 ESP-01S serial Wifi transceiver network module
- 🚩 This ESP01 adapter has a 0.1µF decoupling capacitor, so the ESP-01/ESP-01S will always run smoothly and without a hitch. It comes with an onboard capacitor for ESP8266 modules, you can use these boards for radio modules as well.
- 🚩 Easy to use, pin headers already pre-solder, you do not need to solder it.
9.2Excellent
View offer on:
Show more
7
KeeYeesKeeYees 2pcs ESP32 Breakout Board GPIO 1 into 2 for 38PIN No Mounting Hole Version ESP32 Development Board
Main highlights- UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
- IMPORTANT: Only compatible with 38 pins Narrow and No Mounting Hole Version esp32 development board, ref asin: B07QCP2451. Not applicable to other versions.
- GPIO 1 INTO 2: This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative.
- DOUBLE-LAYER PCB: The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- 2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.
9.1Excellent
View offer on:
Show more
8
GeekstoryGeekstory ESP8266 ESP-01 Serial WiFi Wireless Adapter Module DC3.3V 5V ESP01 Breakout PCB Adapters Compatible for Arduino（Pack of 5pcs）
Main highlights- Working voltage: 4.5~5.5V (On-board 3.3V LDO Regulator) Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)
- The WiFi adapter module has super fast response, strong anti-interference ability and high cost performance.
- PACKAGE：You will get 5pcs ESP-01 Adapter Module
- How to email us：Please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question”
- 3.3V voltage regulator circuit and onboard level conversion circuit can make 5V microcontroller easy to use with ESP-01 Wi-Fi module.
8.9Very Good
View offer on:
Show more
9
FREENOVEFreenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Main highlights- Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.
- Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.)
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level.
- Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.)
8.7Very Good
View offer on:
Show more
10
HiLetgoHiLetgo 3pcs USB to ESP8266 ESP-01 Adapter USB to TTL Driver Serial
Main highlights- USB to ESP8266 Serial WIFI Module
- Size: 4.8*3.5cm
- Serial port WIFI
- SMD 3225 crystal oscillator
- High speed CPU frequency
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for breadboard adapter esp
