10 Best Bms for Titanate Battery In The Us - Black Friday 2024
6S Active Balancer with Voltage Display Lifepo4 Equalizer Lipo/LTO/Lithium Titanate Battery Voltage Tester (LTO)
Main highlights- When the voltage difference is 0.1V, the current is about 0.5A (actually it will be related to the capacity and internal resistance of the battery). When the battery is lower than 2.7V (ternary lithium/lithium iron phosphate), it stops working and enters sleep, and has over-discharge protection function. The battery voltage display supports real-time display of the voltage of the entire battery group and the voltage of a single string, and the numerical accuracy can reach about 5mV. This product is suitable for ternary lithium and lithium iron phosphate batteries.
- The circuit board is sprayed with three-proof paint, which has excellent insulation, moisture-proof, leakage-proof, shock-proof, dust-proof, corrosion-proof,anti-aging, corona-resistant and other properties, which can effectively protect the circuit and improve the safety and reliability of the product.
- The 6S balancer has the function of full-disk equalization without distinction and automatic low-voltage sleep. The minimum voltage difference can be balanced to about 0.01V, and the maximum equalization current can reach 5A.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
heltec bms6S Active Balancer with Voltage Display Lithium Titanate 5A Capacitor Balancing Plate for LTO Batteries
Main highlights- When the voltage difference is 0.1V, the current is about 0.5A (actually it will be related to the capacity and internal resistance of the battery). When the battery is lower than 2.7V (ternary lithium/lithium iron phosphate), it stops working and enters sleep, and has over-discharge protection function. The battery voltage display supports real-time display of the voltage of the entire battery group and the voltage of a single string, and the numerical accuracy can reach about 5mV. This product is suitable for ternary lithium and lithium iron phosphate batteries.
- The circuit board is sprayed with three-proof paint, which has excellent insulation, moisture-proof, leakage-proof, shock-proof, dust-proof, corrosion-proof,anti-aging, corona-resistant and other properties, which can effectively protect the circuit and improve the safety and reliability of the product.
- The 6S balancer has the function of full-disk equalization without distinction and automatic low-voltage sleep. The minimum voltage difference can be balanced to about 0.01V, and the maximum equalization current can reach 5A.
9.7Exceptional
View offer on:
Show more
3
Heltec AutomationHeltec 4S 5S 6S 5A Capacitor Active Equalizer Balancer Lifepo4 Lithium Lipo/Titanate LTO for Battery Car Audio Group Balancer
9.4Excellent
View offer on:
Show more
4
QINIZX10S-14S 13S 12String 5A Capacitor Active Equalizer Balancer Lifepo4 Lithium Lipo/Titanate LTO Battery Energy Active Equalization BMS Balancer Module Whole Group Balancer
Main highlights- Working Voltage: 1.8V-4.5V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4), lithium titanate battery (LTO). Tips: When buyers have problems, please be sure to take the initiative to contact us, and trust us have the ability to solve your problems. (Default not contain any batteries.)
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- Usage Tips: The voltage gap of each battery must be within 0.5V. When the battery voltage difference does not reach more than 0.1V, the light on the balance board is triggered by mistake. The light actually has no balance current when it lights up, and it will automatically go out after a period of time. So We suggest re-plugging the cable to solve the problem. Note that It takes time to equalize the voltage, hot is normal and it does not take effect immediately after plugging it in.
- The quiescent current is about 7mA, and the battery capacity is recommended to be used between 30-300AH/Per Balancer.High-capacity batteries can be connected in parallel with multiple equalizers. With under-voltage sleep protection, only detecting the B1 battery voltage, the equalizer will automatically stop entering the sleep state when the B1 voltage NCM/LFP<2.7V or LTO<1.8V, and the standby power consumption is less than 0.1mA.
- NOTE: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board. Tips: This balancer board is backward compatible by default. eg. If it is used for 13-String, the last line B14+ is empty; use for 12-string, B14+ and B13+ vacant no wiring. and so on.
9.1Excellent
View offer on:
Show more
5
heltec bms4S Active Balancer lifepo4 4s 3a 5a lipo/lifepo4/lto/Sodium Battery Cell Balancer Group 5A with Shell for 0855A (4S 5A Balancer Shell)
Main highlights- [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- [Protection switch]: With under-voltage sleep protection, the voltage will stop automatically when the voltage is lower than 3.0V, and the standby power consumption is less than 0.1mA.
- [Product Information]:Working voltage: 1.8V-4.5V，Suitable for ternary lithium, lithium iron phosphate, lithium titanate.Working principle, the capacitor fit transfers the charge mover, the equalization board is connected to the battery, and the equalization is started. The original new ultra-low internal resistance MOS, 2OZ copper thickness PCB，Equilibrium current 0-5.5A, the more balanced the battery, the smaller the current, with manual sleep switch, sleep current mode is less than 0.1mA, the balance voltage accuracy is within 5mv! The quiescent current is about 12 mA. It is recommended that the battery capacity is 60-300AH.
8.9Very Good
View offer on:
Show more
6
BisidaBisida 8S BMS 25.6V 30A Lifepo4 Battery Management System PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Lifepo4 Battery Pack (8S 25.6V 30A)
Main highlights- 【Wiring Method】The wiring methods of common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- 【Preparation Before Installation】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- 【Operating Temperature】Bisida's BMS supports (3.2V) Lifepo4 battery charging and discharging in zones from 2.3V to 3.65V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- 【Multi -Function Protection】Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, Downtime protection，Voltage balance(passive balance), etc.
- 【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
8.6Very Good
View offer on:
Show more
7
Cywhrvzsf3S 4S 5A Active Equalizer Whole Group Balancer Lifepo4 Lipo Lto Lithium Active Battery Energy Transfer Equalization Capacitor
Why we love it
Easy Setup: No external power needed.
Protection: Automatically stops for low voltage.
Customizable: Suitable for various batteries.
8.4Good
View offer on:
Show more
8
Shutao3Pcs 6S 18650 Li-Ion Lithium Battery PCB Protection Board 24V 40A Solar Lighting BMS PCB with Circuit Balanced Protection Module Cell Charging Module with Balance Function for Drill Motor
Main highlights- Protection board with overcharge protection, over discharge protection, over current protection, short circuit protection
- Maximum discharge current: 40A
- Instantaneous discharge current: 70A
- Charging voltage: 25.5V
- 6 string 24V 6-Cell lithium battery power protection board, split-mouth 40A discharge current
8.2Good
View offer on:
Show more
9
heltec bmsHeltecbms 5A Lipo/lifepo4 Active Balancer 4s with Voltage Dispaly 12V Lithium Battery Energy Transfer Active Equalizer
Main highlights- Working voltage: 1.8V-4.5V，Suitable for ternary lithium, lithium iron phosphate, lithium titanate.
- Working principle, the capacitor fit transfers the charge mover, the equalization board is connected to the battery, and the equalization is started. The original new ultra-low internal resistance MOS, 2OZ copper thickness PCB，Equilibrium current 0-5.5A, the more balanced the battery, the smaller the current, with manual sleep switch, sleep current mode is less than 0.1mA, the balance voltage accuracy is within 5mv!
- With under-voltage sleep protection, the voltage will stop automatically when the voltage is lower than 3.0V, and the standby power consumption is less than 0.1mA.
- We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- The quiescent current is about 12 mA. It is recommended that the battery capacity is 60-300AH.
8.0Good
View offer on:
Show more
10
ANMBESTANMBEST 13S 48V 35A PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module with Balance for Battery Cell Pack
Main highlights- With Over-discharge protection, overcurrent protection, overcharge protection, temperature control protection function, safe and reliable.
- The protection board is for 13 series cell Li-ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- It is suitable for electric car, electric power assistant car, skateboard car, inverter, etc.
- It has balance function which would ensure each battery cell being fully charged at same time.
- High-accuracy voltage detection circuit, fine workmanship and durable.
7.7Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for bms for titanate battery
