8 Best Bms 36v Xc Y008 V1s of 2025
Best Choice1
VNSZNRVNSZNR LiFePO4 BMS 36V 12S 80A Smart PCB Battery Protection Board Battery Management System with Balance Leads Wires and Wireless Module for Lithium Iron Phosphate
Main highlights- ★【VNSZNR BMS】What You Get: 1pcs*VNSZNR BMS Lifepo4 12S 36V 80A, 1pcs*module, 1pcs*balance cable and 1pcs*English manual,Package also come with B-P- cable,NTC cable(temperature sensor). 36-months warranty and friendly customer service. Quality Guarantee--- ISO/ FCC/ ROHS/ PSE/ CE APPROVED.
- ★【VNSZNR BMS】The BMS was be manufactured by high quality Mos and IC. Keep your battery long cycle service life time. Extreme low power consumption. The consumption of the whole device is less than 50uA.PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.It is waterproof, dustproof and shockproof.
- ★【Smart LiFePO4 BMS 36V 80A】For our smart bms,when first use,need to activate first,then B- P- can be conductive,voltage from P- can be same from B-, then BMS can work well.
- ★【Module】Available connect with Android and IOS App and can review the battery status in real time by mobile phone. Through module can set the battery capacity, protection temperature, protection voltage and etc.
- ★【BMS Activation Method】Method ①: Press the button on the module to activate the bms directly.Method ②: Charge activation, B-line must be connected to the total negative pole of the battery pack when charging. If Method ① fails to activate the BMS, try Method ② to activate the BMS.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
VNSZNRVNSZNR Lithium Battery BMS 36V 40A 10S Li-ion Battery Management System PCB Protection Board with Balance Leads BMS for DIY Lithium Battery Pack 36V
Main highlights- ★【What You Get】36-months warranty and friendly customer service. Quality Guarantee--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED.
- ★【Over-charge over-discharge protection】--- Li-ion battery pack will stop charging when its voltage reaches 4.25V and stop discharging when its voltage reaches 2.7V.
- ★【Multiple protection】Over-charging protection. Over-discharging protection. Over-current protection. Temperature protection. Disconnect protection. Short Circuit Protection. Short Circuit protect recover. Balance Function.
- ★【Heavy Duty】VNSZNR Lifepo4 BMS use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.It is waterproof, dustproof and shockproof.
- ★【Current Protection】----BMS will stop Li-ion battery pack from charging when charge current over 20A and discharging when discharge current over 60A.
9.7Exceptional
View offer on:
Show more
3
GODIYMODULESBMS 10S 36V 15A Li-ion Lipolymer 18650 Battery Charge Board for Ebike Scooter
Main highlights- Type: 10S 36V 15A Wiring mode: same port Working power consumption: ≤40uA Main circuit conduction internal resistance: ≤15mΩ Temperature range: 40 to +80°C Disconnection protection: Yes Cable size: 2.0MM pitch/40CM length
- Recharge Single battery overcharge voltage: 4.25V±0.025V Continuous charging current: 15A Charger voltage: 56V-60V (recommended)
- Over temperature protection Charging over temperature: default 63℃ Discharge over temperature: default 85℃
- Discharge Single battery over-discharge voltage: 2.7V±0.08V Continuous working current: 15A Instant protection current: 80A Overcurrent recovery conditions: charge recovery/disconnect load Short-circuit recovery conditions: charge recovery/disconnect load
9.5Excellent
View offer on:
Show more
4
BisidaBisida 10S BMS 36V 30A Li-ion PCB Protection Board with Balance Wire and NTC, Ten Functional protections, Split Ports, for Lithium-ion Battery Pack (10S 36V 30A)
Main highlights- 【Wiring Method】The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack.
- 【Preparation Before Installation】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- 【Operating Temperature】Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- 【Multi -Function Protection】Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- 【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
9.2Excellent
View offer on:
Show more
5
BisidaBisida 10S BMS 36V 30A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Solar Energy Storage, Balance Car Lithium-ion Battery Pack (10S 36V 30A)
Main highlights- 【Wiring Method】The wiring methods of Common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- 【Preparation Before Installation】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- 【Operating Temperature】Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- 【Multi -Function Protection】Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- 【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
9.0Excellent
View offer on:
Show more
6
BisidaBisida 10S BMS 36V 15A Lithium Ion Protection Board with Wire and NTC, Split Ports, Multiple Protection, Battery Management System for Scooter Batteries Lithium-ion Battery Pack
Main highlights- 【Wiring Method】The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack
- 【Operating Temperature】Bisida BMS Lithium Ion supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. (Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data)
- 【Notice】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- 【Multiple Protection】Bisida 36V BMS has a variety of protection functions, such as Overcharge Protection, Overdischarge Protection, Overcurrent Protection, Short circuit Protection, Temperature Protection, Disconnection protection.
- 【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
8.7Very Good
View offer on:
Show more
7
MidzooBMS 10S 36V 30A Li-ion Lithium 18650 Battery Protection Board Split Port with Balance Equalizing PCB for Power Bank/Escooter Cha
Main highlights- BMS 10S 36V 30A Li-ion Lithium 18650 Battery Protection Board Split Port with Balance Equalizing PCB For Power Bank/Escooter Cha
8.5Good
View offer on:
Show more
8
ROXIFETABMS 10S 36V 15A 18650 Lithium Battery Charge Protecton Board Li-ion BMS PCB PCM for Ebike Electric Bicycle Power Bank Charging New for Arrival 2025 High for Quality
Main highlights- VERSATILE APPLICATIONS: Our electronics products can be used in a variety of applications, including industrial, automotive, and household electronics
- MONEY-BACK GUARANTEE: Confidence comes from high quality and our continuous pursuit for perfectness
- HIGH-QUALITY ELECTRONICS COMPONENTS: Our products are made with top-of-the-line electronics components, ensuring reliable and long-lasting performance
- EXCEPTIONAL CUSTOMER SUPPORT: We pride ourselves on providing exceptional customer support, with a knowledgeable team available to answer any questions or concerns
- EASY TO INSTALL AND USE: Our electronics products are designed to be user-friendly, with clear instructions and simple installation processes
8.4Good
View offer on:
Show more
