10 Best Bluetooth Y Arduino In The Us - Black Friday 2024
Best Choice1
ACEIRMCACEIRMC 10pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
Main highlights- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect.
- Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g.
- HC-06 Bluetooth Serial Pass-Through Module Wireless Serial Communication Compatible for Arduino
- Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ArduinoArduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3 - Wi-Fi, Bluetooth, USB-C, CAN, DAC, OP AMP, Qwiic Connector, 12x8 LED Matrix
Main highlights- Wi-Fi/Bluetooth and Arduino Cloud compatibility: The UNO R4 WiFi combines an ESP32-S3 coprocessor for seamless Wi-Fi and Bluetooth connectivity. It frees up the RA4M1 microcontroller for other tasks. With built-in Wi-Fi and Bluetooth, makers can create IoT projects, benefiting from standardized APIs and existing projects. The UNO R4 WiFi is fully compatible with Arduino Cloud, allowing remote data storage, interactive dashboards, Over-the-Air uploads, and variable sharing among boards.
- The Arduino UNO R4 WiFi combines the processing power and exciting new peripherals of the RA4M1 microcontroller from Renesas with the wireless connectivity power of the ESP32-S3 from Espressif. On top of this, the UNO R4 WiFi offers an on-board 12x8 LED matrix, Qwiic connector, HID support, VRTC, and OFF pin, covering all potential needs makers will have for their next project.
- LED matrix creativity: The UNO R4 WiFi boasts a vibrant 12x8 red LED matrix (96 dots) perfect for creative projects, animating visuals or plotting sensor data, all without requiring extra hardware. Users can utilize the provided API and tutorials for manual LED control via sketch code. Access a gallery of pre-made animations and leverage our online tool for easy creation of custom visual effects.
- Hardware compatibility with UNO hardware and larger input voltage range: The UNO R4 WiFi maintains hardware compatibility with the UNO form factor and operates at 5V. It now supports a wider input voltage range, up to 24V, enabling seamless integration with motors, LED strips, and other actuators. This allows for easy porting of projects developed with previous UNO form factor boards and simplifies projects by utilizing a single power source.
- Expanded memory and faster clock with extra on-board peripherals: The UNO R4 WiFi empowers you with increased memory and a faster clock speed, enabling more precise calculations, effortless handling of complex projects, and the ability to tackle demanding tasks with ease. Additionally, it introduces a range of on-board peripherals, including a 12-bit DAC, CAN BUS, OP AMP, OFF pin, VRCT pin and Qwiic connector, providing expanded capabilities and design flexibility.
9.6Exceptional
View offer on:
Show more
3
DSD TECHDSD TECH HC-05 Bluetooth Serial Pass-through Module Wireless Serial Communication with Button for Arduino
Main highlights- Use the CSR BC417 mainstream bluetooth chip, bluetooth V2.0 SPP protocol standards
- Module working voltage 3.6 V to 6V
- Default rate of 9600,default pin:1234, the user can be set up.click the button into AT MODE
- Can be switched via AT commands as master or slave mode , the device can be connected via AT commands specified
- Bluetooth module HC-05 Master and slave Two in one module. Please note: iOS devices (iPhone) are not supported
9.5Excellent
View offer on:
Show more
4
AOICRIE3PCS HC-06 HC 06 Bluetooth Module RF Wireless Bluetooth Transceiver Module 4 Pins for Arduino
Main highlights- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane, when the bluetooth connection has not been established by pairing the AT command set baud rate, name, password, and set the parameters of the power save. After the bluetooth connection automatically switch to passthrough mode.
- Using HC - 06 from module , which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid.
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect.
- Interface level 3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage, can be connected directly to all kinds of single chip microcomputer, 5 V single chip can be connected directly, without MAX232 couldn't through MAX232.
- Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
9.3Excellent
View offer on:
Show more
5
ArduinoArduino Nano ESP32 with headers [ABX00083] ESP32-S3, USB-C, Wi-Fi, Bluetooth, HID Support, MicroPython Compatible
Main highlights- Wi-Fi and Bluetooth connectivity: With the Nano ESP32, you can tap into the impressive capabilities of the ESP32-S3 microcontroller, a widely recognized and acclaimed choice in the IoT realm. Enjoy reliable and high-speed wireless connectivity, enabling your projects to effortlessly connect to networks, communicate with other devices, and access the vast resources available on the internet.
- HID support: Take your projects to the next level with HID (Human Interface Device) support offered by the Nano ESP32. This feature allows you to emulate various human interface devices, such as keyboards or mice, over USB. By emulating these devices, you can create unique and interactive experiences, enabling seamless interaction between your projects and computers.
- Dive into IoT with ease: With the Nano ESP32, there are no more excuses to embrace your exploration of IoT and MicroPython. It delivers a compelling combination of compactness, wireless connectivity, programming versatility, cloud compatibility, and HID support, providing everything you need to unleash your creativity, realize your project ideas, and embark on a journey of endless possibilities.
- Arduino and MicroPython support: The Nano ESP32 provides full support for both Arduino and MicroPython programming languages, allowing you to effortlessly switch between the two. Leverage your existing Arduino knowledge or venture into the exciting realm of MicroPython with ease. Beginners can also benefit from the introductory course offered, ensuring a solid foundation for their MicroPython journey.
- Arduino IoT Cloud compatible: The Nano ESP32 integrates with the Arduino IoT Cloud, enabling you to effortlessly create IoT projects. With just a few lines of code, you can connect your devices, collect data, and remotely monitor and control them using the Arduino IoT Cloud app. The Nano ESP32 takes care of the necessary security measures, ensuring your data remains protected while you focus on developing innovative IoT solutions.
9.2Excellent
View offer on:
Show more
6
DORHEA5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module
Main highlights- Note: The module doesn’t suitable for IOS system.
- Master and Slave 2-IN-1 HC-05 Module; Working Voltage 3.6V to 6V; Default baud rate:9600, Button: Press the button; the module enter the AT mode. AT commands are executed only in AT mode.
- HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection.
- HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED.
- HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.
9.0Excellent
View offer on:
Show more
7
HiLetgoHiLetgo 2pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino
Main highlights- The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module
- Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234
- HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED.
- Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode.
- 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board
8.9Very Good
View offer on:
Show more
8
ArduinoArduino Nano ESP32 Without headers [ABX00092] ESP32-S3, USB-C, Wi-Fi, Bluetooth, HID Support, MicroPython Compatible
Main highlights- Wi-Fi and Bluetooth connectivity: With the Nano ESP32, you can tap into the impressive capabilities of the ESP32-S3 microcontroller, a widely recognized and acclaimed choice in the IoT realm. Enjoy reliable and high-speed wireless connectivity, enabling your projects to effortlessly connect to networks, communicate with other devices, and access the vast resources available on the internet.
- HID support: Take your projects to the next level with HID (Human Interface Device) support offered by the Nano ESP32. This feature allows you to emulate various human interface devices, such as keyboards or mice, over USB. By emulating these devices, you can create unique and interactive experiences, enabling seamless interaction between your projects and computers.
- Dive into IoT with ease: With the Nano ESP32, there are no more excuses to embrace your exploration of IoT and MicroPython. It delivers a compelling combination of compactness, wireless connectivity, programming versatility, cloud compatibility, and HID support, providing everything you need to unleash your creativity, realize your project ideas, and embark on a journey of endless possibilities.
- Arduino and MicroPython support: The Nano ESP32 provides full support for both Arduino and MicroPython programming languages, allowing you to effortlessly switch between the two. Leverage your existing Arduino knowledge or venture into the exciting realm of MicroPython with ease. Beginners can also benefit from the introductory course offered, ensuring a solid foundation for their MicroPython journey.
- Arduino IoT Cloud compatible: The Nano ESP32 integrates with the Arduino IoT Cloud, enabling you to effortlessly create IoT projects. With just a few lines of code, you can connect your devices, collect data, and remotely monitor and control them using the Arduino IoT Cloud app. The Nano ESP32 takes care of the necessary security measures, ensuring your data remains protected while you focus on developing innovative IoT solutions.
8.8Very Good
View offer on:
Show more
9
Arduino21% OffArduino Nano 33 IoT [ABX00027]
Main highlights- The ease of use of a Nano board with the addition of secure IoT and BT connectivity
- Small (45mm x 18mm), robust and powerful board; 3.3V variant of the Nano family. Arm Cortex-M0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox
- Pre-certified module with external processor ensures maintaining RF compliance when writing application code.Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.3V power supply to peripherals at significant output current
- On-board DC-DC power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating
- Clock up to 48MHz, Flash 256KB, SRAM 32KB, Secure WiFi and Bluetooth connectivity with a 6-axis IMU, ECC608A crypto chip provides IoT security. Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
8.7Very Good
View offer on:
Show more
10
ACEIRMCType-C D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible for Arduino (3pcs Type-C)
Main highlights- Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications.
- Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications.
- D1 Mini NodeMCU Type-C ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible for Arduino
- All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO.
- 100% compatible with Arudino IDE, Lua and Micropython, it shows robustness, versatility, and reliability in a wide variety of applications and power scenarios.
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for bluetooth y arduino
