10 Best Bluetooth Module Vhm 314 In The Us - Black Friday 2024
Best Choice1
AOICRIE3PCS HC-06 HC 06 Bluetooth Module RF Wireless Bluetooth Transceiver Module 4 Pins for Arduino
Main highlights- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane, when the bluetooth connection has not been established by pairing the AT command set baud rate, name, password, and set the parameters of the power save. After the bluetooth connection automatically switch to passthrough mode.
- Using HC - 06 from module , which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid.
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect.
- Interface level 3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage, can be connected directly to all kinds of single chip microcomputer, 5 V single chip can be connected directly, without MAX232 couldn't through MAX232.
- Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DSD TECHDSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano
Main highlights- working voltage 3.6 V to 6V,Default rate of 9600. DSD TECH back this Bluetooth 4.0 BLE module with ONE Year WARRANTY. If you meet any question, please contact us, we will fix your issue within 24 hours.
- iBeacon Support:You can make this module into ibeacon mode.So you can have your own ibeacon.it also Supports Apple Notification Center Service (ANCS)
- Low Energy: With HM-10 bluetooth 4.0 module, you can add Bluetooth features to your project and support iphone4s or later.
- Led status indication: when the connection is established will always light, disconnection is flash
- DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project
9.7Exceptional
View offer on:
Show more
3
HiLetgoHiLetgo 5pcs Bluetooth 5.0 Mp3 Lossless Decoder Board VHM-314 USB-C Audio Bluetooth Receiver Board Wireless Stereo Music Module Type-C
Main highlights- Support Bluetooth 5.0/4.2/4.1/4.0
- Standard 3.5mm interface, output stereo sound source, easy to plug in headphones, connect amplifiers and other devices
- Micro USB 5V power supply; Power supply: DC3.7~5V
- Bluetooth 5.0 Mp3 Lossless Decoder Board
- Bluetooth 5.0 Audio Receiver Board USB-C Type-C
9.4Excellent
View offer on:
Show more
4
QCCANQCCAN 4Pcs Bluetooth Audio Receiver Board VHM-314 Bluetooth 5.0 MP3 Lossless Decoder Board Wireless Stereo Music Module 3.7-5V
Main highlights- USB powered Universal Micro USB 5V power supply; 3.7-5V Supply Pad External 3.7-5V lithium battery power conversion.
- Support Profile A2DP/AVCTP/AVDTP/AVRCP/HFP.
- Package Included:4 x Mini Bluetooth 5.0 MP3 Decoder Board.
- LED indicator Bluetooth mode long blue light.
- 3.5mm stereo audio interface Standard 3.5mm interface, output stereo sound source, plug in headphones, connect amplifiers and other devices.
9.1Excellent
View offer on:
Show more
5
HiLetgoHiLetgo 5pcs Bluetooth 5.0 Mp3 Lossless Decoder Board VHM-314 Audio Bluetooth Receiver Board Wireless Stereo Music Decoding Module Micro USB
Main highlights- VHM-314 Bluetooth Audio Receiver Board
- Support Bluetooth 5.0/4.2/4.1/4.0
- Standard 3.5mm interface, output stereo sound source, easy to plug in headphones, connect amplifiers and other devices
- Micro USB 5V power supply; Power supply: DC3.7~5V
- Bluetooth 5.0 Mp3 Lossless Decoder Board
9.0Excellent
View offer on:
Show more
6
DSD TECHDSD TECH HC-05 Bluetooth Serial Pass-through Module Wireless Serial Communication with Button for Arduino
Main highlights- Use the CSR BC417 mainstream bluetooth chip, bluetooth V2.0 SPP protocol standards
- Module working voltage 3.6 V to 6V
- Default rate of 9600,default pin:1234, the user can be set up.click the button into AT MODE
- Can be switched via AT commands as master or slave mode , the device can be connected via AT commands specified
- Bluetooth module HC-05 Master and slave Two in one module. Please note: iOS devices (iPhone) are not supported
8.9Very Good
View offer on:
Show more
7
HiLetgoHiLetgo 3pcs M18 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
Main highlights- Pin pitch: 2.54mm
- PCB size: 23*16*2.5mm
8.7Very Good
View offer on:
Show more
8
HiLetgoHiLetgo 3pcs M38 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
Main highlights- This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers may not be connected in parallel or the negative poles may be connected together, otherwise the power amplifier chip may be damaged.
- Support USB sound card, free drive (plug and play). Connect the module to the computer with a USB cable, and the computer can play music through the module amplifier output. Audio output: output left and right stereo audio signals, which can be connected to two 2-8 ohm, 3-5W speakers, and 4 Euro 5W speakers.
- Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown below). Note that the 5V and 3.7V power supply interfaces are different. The 5V voltage is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND. The maximum operating current is 5V2A. It is recommended to use a regulated 5V2A power supply for better sound quality.
8.5Good
View offer on:
Show more
9
HiLetgoHiLetgo 2pcs CT14 Stereo Bluetooth Amplifier Board 5V AMP F Class 5W+5W Amplifier Module with Charging Port for Speaker Modification DIY
Main highlights- It supports automatically connecting devices that have been paired and playing music automatically.
- It can be compatible with all mobile phones and Bluetooth adapters on the market, it supports USB sound card, no drive, plug and play.
- Good sound quality, suitable for upgrading and refitting the idle sound box and Speaker DIY
- F class power amplifier 5W+5W, high power output, over 8002 sound quality.
- CT14 Stereo Bluetooth Amplifier Board 5V AMP F Class 5W+5W Amplifier Module
8.3Good
View offer on:
Show more
10
HiLetgoHiLetgo 2pcs PAM8403 3W+3W Wireless Bluetooth 4.0 Module Micro USB Power Supply 2x3W Bluetooth 4.0 Audio Receiver Digital AMP Amplifier Board Bluetooth Module
Main highlights- Ultra-small size, simple installation, wide application range
- PAM8403 3W+3W Wireless Bluetooth 4.0 Module
- Mini design, sound loud and clear, strong sense of hierarchy
- Micro USB Power Supply, Working voltage: DC 5V
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for bluetooth module vhm 314
