10 Best Battery Isolator Switch 24v 12v In The Us - Black Friday 2024
FEITON Remote Battery Disconnect Switch, 250A Intelligent Battery Cut Off Switch 12V 24V DC, Heavy Duty Battery Isolator Switch for Car RV Truck Battery Drain Preventer(1000A Starting Current)
Main highlights- Upgraded Magnetic Latching Relay - Compared to the older version, The automatic kill switch for car uses a new type of relay that controls circuit disconnection and cut-off by magnetic principle, standby current of only 0.003A, which is far lower than the standby current of the original car, completely solving the problem of parking power consumption. The improved accessories make the installation contact more secure.
- Smart Voltage Kill Switch - Battery kill switch detects the voltage and shows the battery voltage status via the indicator at all times. In smart mode, when the battery voltage is lower than 11.8V, the switch will automatically cut off the power supply after 120s to save electricity. When the battery voltage is higher than 13.3V when driving, remote will not control the switch relays to prevent accidental action to shut off the power while driving.
- Product Specifications - Rated Current: 250A, Instantaneous Current: 1000A, Standby Power Consumption: 3mA, Rated Voltage: 12V, Power-off Threshold: 11.8V±0.2V, Operating Temperature: -22℉~194℉, Remote Control Distance: within 100M. It suit for most 12V car, ATV, UTV, motorcycle, vehicles with Engine under 6 cylinders.
- Key Point: This product isn't suitable for small pile head vehicles!!! Not applicable to cars with a displacement greater than 3.0!!! Negative pole: 9-13 mm and 15-17mm, the size of the switch is 3.3"x2.4"x1.4", before order it, it's best to check and measure if there is enough space to install!
- Easy to Install - The car battery switch is made of pure copper. Durable and reliable. The power shut off switch uses a negative connection to ensure stable performance. Please remember to turn off the power and wear insulating gloves before installation. Package include: Cut off Switch x 1 , Remote controller x 2 , Manual x 1.
- Curious about how we select the top products for you? Explore How It Works
Nilight 600A High Current Battery Switch 12V 24V 48V ON Off Heavy Duty Battery Power Cut Master Switch Disconnect Isolator for Truck Vehicle Trailer RV Marine Boat Yacht
Main highlights- Widely used for car, marine boat, RV, camper, travel trailer, truck, ATV, UTV, battery banks and other devices.
- Package include: 1x On/Off battery switch,4 bolts,2x Copper Ring Terminals,2x Heat Shrink Tubings , 1x hex wrench.
- Operation: On/Off 2 positions, 600 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V.
- Heavy Duty: ABS plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits.
- Compatible: used for DC 12 - 48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Its purpose is to eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely.
Side Post Knife Blade Master Switch, Ampper 12V / 24V Battery Disconnect Switch Isolator for Marine Car Boat RV ATV Vehicles (Kit)
Main highlights- Purpose: used for battery to isolate and secure the electrical system, eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely.
- Heavy Duty: solid brass made, rust and corrosion resistant, durable made for safety use.
- Convenience: knife blade type, easy to install & simple to use. Lift the knife, then power will cut. With 2 pairs 3/8" side post battery terminal bolts (1 pairs short and 1 pairs long), 2 spacer and 2 washers.
- Compatible: used for side post terminal, battery side post with 3/8" hole only, recommended to mount on NEGATIVE battery post, DC 12V-24V system, 200A continuous and 600A momentary at DC 12V, on/off 2 position.
- Compatible with GM side post batteries or other batteries which have a 3/8" side post terminal, also used for electrical equipment.
12-48V Master Battery Disconnect Switch, High Current 200A Battery Power Cutoff Isolator Killer Switch with Face Plate for Car Vehicle RV Truck Boat Marine Outboards ATV On/Off Battery Isolator Switch
9.9 Easy installation9.7 worth the money9.3 DurabilityWhy we love it
Universal fit fits all ATVs, Trailers, Off Road, RVs, Trucks, Heavy Vehicles, UTVs, Boats, and Cars.High current 200 Amps continuous, 1000 Amps intermittent.Durable robust aluminum alloy, strong weather resistance.AWBLIN Battery Disconnect Switch 12V 24V 48V Master Isolator Cut Off Switch for Marine Boat Car Truck Camper RV Trailer Vehicles Engine Application (On/Off)
Main highlights- WIDELY APPLICATION: Battery isolator switch is universal used for RV, Marine, Car, Boat, Camper, Travel Trailer, Truck, ATV, UTV battery and other engine application, makes it an effortless job of turning the battery on and off.
- STURDY & FULLY ENCLOSED SHUT OFF SWITCH: The Heavy Duty Cut Off Switch is made of ABS plastic housing and copper tin plating inner stud. Fully enclosed design to protect wiring from dirt, corrosion, and rain. This is the best choice in harsh ocean conditions.
- PACKAGE INCLUDE: Equiped with 1* Battery Switch, 4 Pcs Mounting Bolts, 4 Pcs 2*3/8 Copper Ring Terminals, 4 Pcs Heat Shrink Tubings and a hex wrench, which can provide great convenience for your installation. If you have any questions,please contact us via email. We are always here to support you.
- EASY TO OPERATE: On/Off 2 position, Suitable for various 12 V/24 V/48 V systems. Current voltage: rating at 275 A continuous (1 hour) at 48 V DC and 1000 A for 5 seconds. Clockwise to turn on , counter clockwise to turn off.
- COMPATIBILITY & SAFETY: This Battery Kill Switch Used for DC 12 - 48V systems to isolate and secure the electrical system; eliminate any power draw from the battery when vehicle is not in use, disconnects the battery safely; provide a reliable way to shutdown electrical power during maintenance and protect batteries from excessive drain.
AWBLIN Upgrade Battery Disconnect Switch with Voltmeter, DC 5-60V Master Isolator Cut/Shut Off Switch for Marine Boat Car Truck Camper RV Trailer Vehicles Engine Application (On/Off)
Main highlights- WIDE APPLICATION: Battery isolator switch is universal used for RV, Marine, Car, Boat, Camper, Travel Trailer, Truck, ATV, UTV battery and other engine application, makes it an effortless job of turning the battery on and off.
- PACKAGE INCLUDE: Equiped with 1* Battery Switch, 4*Removeable Side Plate, 1*Rubble Gasket, 1*Rear Cover, 4*Nut, 4*Screw, 1*2/8" Terminal. If you have any questions,please contact us via email. We are always here to support you.
- MORE STURDY, BETTER CONDUCTIVITY: Compared with the traditional ABS plastic shell material, the heavy duty cut off switch uses a better nylon 66 shell, high temperature resistance effect is better, more safe to use; The internal screw of the cutoff switch uses copper plated silver + silver contacts, which has better electrical conductivity, oxidation resistance and longer service life.
- LED DIGITAL VOLTMETER DISPLAY: The battery isolator switch surface is equipped with an LED display, which displays the current voltage status in real time, allowing you to better monitor the battery status at any time. When the battery switch is on, the upper button screen monitors the voltage in real time. When the master disconnect switch is off, the screen does not display.
- EASY TO OPERATE: On/Off 2 position, Suitable for various 6V/12V/24V/48V/60V systems. Current: 250A Continuous at DC 12V; 300A for 30 minutes. Clockwise to turn on , counter clockwise to turn off.
- COMPATIBILITY & SAFETY: This Battery Kill Switch Used for DC 5 - 60V systems to isolate and secure the electrical system; eliminate any power draw from the battery when vehicle is not in use, disconnects the battery safely; provide a reliable way to shutdown electrical power during maintenance and protect batteries from excessive drain.
Marine Battery Disconnect Switch - Premium On-Off Position Master Cut Off Switch - 6V 12V 24V 48V - Battery for Boat, ATV, RV, UTV, Heavy Duty Waterproof Isolator Switch, 275/1250 Amps (On-Off)
Main highlights- Universal Compatibility - Simple Installation - Used for DC 6 - 48V systems to isolate and secure the electrical system, can stand alone or be connected together with other switches. Our battery cut off kill switch has four removable side plates which provide easy access
- Safe and Efficient - Tin-Plated copper studs and nuts - Ignition-Protected, simple to install, universally used for Cars, battery powered Vehicles, RV and Boat, also used for electrical equipment's switch
- Premium Marine Battery Disconnect Switch - On Off position switch. Made from durable ABS plastic - Our cut-off battery switch is simple and safe to use
- Heavy Duty and Extremely Reliable - Eliminate any power draw from the battery when your Vehicle or Boat is not in use, disconnects the battery safely. The rear cover insulates the rear terminals against any short circuits, ensuring that the switch meets ABYC requirements
- Easy To Use - Master On/Off Boat Battery Cut Off Switch. Operation: Voltage: 6V 12V 24V 48V DC - 275A DC Continuous Power (1hr) - 455A DC Intermittent Power (5 min) - 1250A DC Cranking Power (10 sec) - Stud Size: 2 x 3/8" (10mm) - Switch ON = Power - Switch OFF = No Power
OCR Battery Disconnect Switch with Keys, 2Pcs 12V-24V Battery Kill Switch Isolator Disconnect Cut OFF Power for ATV Car Auto, On Off Battery Master Switch with Waterproof Key and Cover
Main highlights- Wide Application -- The battery switch is widely used for car, marine, boat, RV, camper, travel trailer, truck, ATV, UTV, battery banks, and other 12V/24V devices.
- Waterproof -- Each battery master switch comes with 2 keys and a weather cover. The keys are made of plastic and fit perfectly on the thumb for ease of use.
- Safely -- Battery isolation switch helps you isolate and secure the electrical system, eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely.
- Operation -- This battery kill switch is used for DC 12V 24 V systems, On/Off 2 position. Continue current: 200A 12V. Crank current: 1000A 12V. Recommended to mount on NEGATIVE battery post!
- Durable Quality -- Switch shell is made of nylon, Copper terminals with steel hex nuts and washers, for improved continuity, which is resistant to high temperature, and protects the power supply from leakage and corrosion.
Black Friday Sale
Deal ends in
HrsMinSec