B1 Biqu Printers of 2025
Best Choice1
BIQUBIQU Panda Revo Hotend for Bambu-Lab X1C 3D Printer, High Flow Hotend up to 40mm3/s, Equipped with E3D Quick Nozzle Replacement Hotend
Main highlights- Quick Nozzle Replacement: If you have a panda revo, nozzle replacement has never been so simple. It can quickly replace the nozzle by hand at room temperature for 30 seconds without the need for tools
- High Temperature Resistance and Fast Temperature Rise: Panda revo is suitable for a variety of consumables. PC consumables can reach a temperature of 300 ℃ and are equipped with a 60W heater, saving waiting time and providing a faster experience of panda revo.
- High Flow Rate: Panda revo uses 0.4mm revo HF nozzle, E3D 60w heater, and NTC100k thermistor, with a high flow rate of 35-40m3/s (depending on the filament), meeting the needs of high-speed and high flow printing
- Easy to Maintain: Panda revo installation is fast and convenient. Thanks to the integrated design of the Revo nozzle, it will not leak the filament. One time investment, lower maintenance costs. When the nozzle is clogged or damaged, only the nozzle needs to be replaced, without the need to replace the whole hotend
- BIQU X E3D: Panda revo is a hotend compatible with the Bambu-Lab X1C 3D printer, jointly developed by BIQU and E3D. It integrates the E3D RapidChange Revo system and is compatible with all revo nozzles except for the revo belt nozzle
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
BIGTREETECHBIGTREETECH PAD 7 Touch Screen Based on Klipper firmware 7 inch Open Source Smart PAD with CB1 Board KlipperScreen for BIQU B1 SE Plus, Voron 2.4, Ender-3 and Most FDM 3D Printers DIY
Main highlights- Wide Application Range: If you use CoreXY 3D printers such as VORON 2.4 or VZ Bot, you can pair them with the PAD 7 + BTT Octopus series control board; If you use i3 3D printers such as Ender-3/BIQU B1 SE Plus, you can pair them with the PAD 7 + BTT SKR series control board; If you use Raspberry Pi Ecology, you can remove the CB1 core board and replace it with CM4 to use Raspberry Pi OS, which can achieve video watching and internet access (Can externally connect keyboard and mouse)
- Upgrade Printing Speed and Quality: PAD 7 upgrade and pre installed Klipper firmware, using Klipper's input shaper and BTT ADXL345 module, can effectively improve printing speed while ensuring printing quality, printing speed can be increased by 2 to 5x compared to Marlin firmware; You can improve the printing quality and speed to new heights and achieve the best model quality possible
- Supports Open Source: Based on the DIY innovation needs of makers, PAD 7 allows users to freely change the PAD firmware system and other Klipper firmware, and can easily replace the PAD firmware system through SD card or USB. Meet the customized needs of users for Klipper
- Rich Connectivity: PAD 7 reserves rich expansion interfaces to make it suitable for a variety of projects and applications. USB2.0 x 3; USB-C x 1: Dial switch selects UART/OTG mode, supports 5V3A power supply; Audio Out x 1: 3.5mm; TF card slot x 1: 32GB; CANbus x 1: MCP2515 SPI to CAN; RJ45 x 1: CB1 supports 100Mbps, CM4 supports 1000Mbps; SPI x 1: Connected to ADXL345; Note: It is not possible to use CAN interface and ADXL345 accelerometer SPI interface simultaneously due to MCP2515 SPI to CAN conversion
- Attack Amplifier: Two sided speakers with adjustable volume buttons (physical adjustment keys need to be supported by the corresponding operating system to be used, currently available in the Klipper mode of CB1, and the desktop system in CM4 mode is pending). It can provide a stereo amplifier for Pad7 when replacing CM4 with a Linux desktop system, and a 3.5mm interface can be connected to headphones to achieve a multimedia experience on a desktop computer
9.5Excellent
View offer on:
Show more
3
BIGTREETECHBIGTREETECH Manta E3EZ + CB1 V2.2 + 5Pcs EZ2209 Kit Support Running Klipper Firmware Silent Control Board Kit for Ender-3 V2, Ender-3 Pro, Ender-3, BIQU B1 3D Printers
Main highlights- This kit includes BIGTREETECH Manta E3EZ silent control board, CB1 V2.2 core control board, and 5PCS EZ2209 stepper motor drivers
- The BIGTREETECH Manta E3 EZ main control board and core board use BTB connection, which can be perfectly paired with the BIGTREETECH CB1 core board
- Manta E3EZ adopts ARM Cortex-M0+series STM32G0B1RE master chip with 32-bit main frequency of 64MHz; The maximum power supply of the motor is 56V
- BIGTREETECH EZ2209 using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage; The newly developed board frame is used to match the new connector to improve the user experience
- BIGTREETECH CB1 is equipped with quad core 64 bit ARM Cortex-A53 @1.5GHz processor, 1GB DDR3 memory chip; Onboard 100M Ethernet interface and supports WIFI transmission
9.4Excellent
View offer on:
Show more
4
BIQUBIQU H2 V2S Lite Direct Drive Extruder 45mm³/s High Flow High Speed for Ender-3 Pro BIQU B1 BX Voron2.4 Vzbot 3D Printers Dual Gear Extruder Not Stuck
Main highlights- 【Wide Compatibility】BIQU H2 V2S Lite extruder is compatible with various 3D printers on the market such as ender 3 /ender 3 Pro /ender 5 /ender 6 /CR10 /Mega S /I3 by DIY an attachment bracket. Please let us know directly through Amazon if you have any problems about our products, BIQU customer service team are always ready to offer help!
- 【Lightweight & Delicate Design】BIQU makes a breakthrough on H2 V2S Lite by giving it an transparent hollowed-out appearance. With such fretwork design, the weight of H2 V2S Lite can be as light as 175g so that the adverse effect of inertia can be declined for higher printing precision.
- 【High Flow Extruder】 BIQU H2 V2S Lite is another member of BIQU H2 extruder family. The 0.6mm brass nozzle and lenthened heater block of H2 V2S Lite allows high speed and faster printing up to 45mm3/s. Max printing temperature of H2 V2S Lite 270°C and can be upgraded to 500°C.
- 【Effective Cooling】 The heat sink structure of H2 V2S Lite is optimized so airflow can divert up away from the nozzle to improve heat dissipation. Note: High flow printing requires effective and active cooling so a high-performance blower fan is recommended.
- 【Details makes Perfect】7075T6 aluminum filament release lever with tensioner makes filament changes a breeze. Double gear drive made of nano-coating tool steal is adopted for improved hardness, better wear and corrosion resistance and longer service life. 4 screw mounting holes are available for installing an auto leveling sensor/cooling fan.
9.3Excellent
View offer on:
Show more
5
BIQUBIQU H2 500°C Extruder Upgrade All Metal Hotend High Temperature Printing 1.75mm Filament Hardened Steel Nozzle Dual Gear Direct Extruder with PT100&Max31865 for BIQU BX B1 SE Plus DIY Printer Kits
Main highlights- Upgraded Heat Break and Nozzle: All metal Titanium Alloy heat break, no Teflon tube, stronger high temperature resistance; nozzle made of high temperature resistant hardened steel, heating up quickly, ensuring normal discharge under high temperature conditions. Smooth inner wall and smooth extrusion. Long service life, easy installation and replacement
- Upgraded H2 500℃ Extruder: Maximum printing temperature is 500℃. In order to meet the printing needs of some special filaments, the high temperature printing kit has been upgraded. And compatible with most filaments on the market. This enables the devices to print with engineering-grade materials such as polyamide, polycarbonate, PEI/Ultem, and even PEEK
- Superior Cooling System: Equipped with fan-based cooling system, 9000Rpm fan, stronger heat dissipation, in addition, it still adopts BIQU H2 integrated design, streamlined heat dissipation structure, to achieve ultra-efficient heat dissipation.The hot end is pre-assembled for easy installation. Integrated structure, easy to disassemble
- High-quality Heating Aluminum Block: Using red copper (Purple copper) nickel-plated heating aluminum block, the heat conduction is stronger, and it will not change color at 500 ℃, which can quickly melt the filament. so that you have more opportunities to choose the printing method you want
- Hardware Configuration: The driver for BIQU H2 at 500 ℃ is MAX 31865 V2.0, which requires the selection of PT100 mode dual line. DIP switches 1 to 3 should be turned on, and 4 should be turned off
9.2Excellent
View offer on:
Show more
6
PofuntreeH2 V2S Lite Direct Drive Extruder 45mm³/s High Flow High Speed for Ender-3 Pro BIQU B1 BX Voron2.4 Vzbot 3D Printers Dual Gear Extruder
Main highlights- 【Wide Compatibility】 H2 V2S Lite extruder is compatible with various 3D printers on the market such as ender 3 /ender 3 Pro /ender 5 /ender 6 /CR10 /Mega S /I3 by DIY an attachment bracket. Please feel free to contact us when you have any trouble during using.
- 【Lightweight & Delicate Design】BQIU makes a breakthrough on H2 V2S Lite by giving it an transparent hollowed-out appearance. With such fretwork design, the weight of H2 V2S Lite can be as light as 175g so that the adverse effect of inertia can be declined for higher printing precision.
- 【High Flow Extruder】H2 V2S Lite is another member of BIQU H2 extruder family. The 0.6mm brass nozzle and lenthened heater block of H2 V2S Lite allows high speed and faster printing up to 45mm3/s. Max printing temperature of H2 V2S Lite 270°C and can be upgraded to 500°C.
- 【Effective Cooling】 The heat sink structure of H2 V2S Lite is optimized so airflow can divert up away from the nozzle to improve heat dissipation. Note: High flow printing requires effective and active cooling so a high-performance blower fan is recommended.
- 【Details makes Perfect】7075T6 aluminum filament release lever with tensioner makes filament changes a breeze. Double gear drive made of nano-coating tool steal is adopted for improved hardness, better wear and corrosion resistance and longer service life. 4 screw mounting holes are available for installing an auto leveling sensor/cooling fan.
9.0Excellent
View offer on:
Show more
7
PofuntreeH2 500℃ Extruder Direct Drive Extruder High Temperature Hotend All Metal Heat Break Dual Gear Extruder for BIQU BX BIQU B1 SE Plus DIY 3D Printer Kits
Main highlights- 【Powerful Cooling】Cooling system of H2 500℃ direct drive extruder is upgraded to meet the needs of high temp printing. Its 9000Rpm fan greatly strengthens heat dissipation for longer time printing.
- 【Hardened Steel Nozzle】Upgraded hardened steel nozzle of H2 500℃ can resist high temperature printing and helps reduce the possibility of nozzle clogging and contributes to smooth extrusion.
- 【All Metal Hotend】BQIU adopts grade A copper-titanium alloy to cast the heat break of our H2 500℃ dual gear extruder. Such premium material all over the market endows the extruder with excellent heat insulation. The upgrade heating block is made of quality nickel-coated red copper to melt filament faster and better heat conduction.
- 【About Compatibility】H2 500°C extruder can be directly mounted on BIQU BX(need to DIY a bracket first for other printers). For Ender-3 CR10 and 3D printers of other brands, you need to change your motherboard to SKR 2/SKR 3/ SKR 3 EZ/SKR V1.4/SKR V1.4 Turbo or mainboards with max31865 and pt 100 interfaces to use our H2 500°C extruder. And please feel free to contact us if you get in trouble during your use.
- 【500℃ High Temp Printing】H2 500° direct drive extruder is upgrated to support maximum 500 degree celsius high temp. priting. Our modified hotend meets the needs for filament extrusion with high temperature such as TPE/TPE/ PEEK, PEI/carbon fiber/nylon and other filament.
8.9Very Good
View offer on:
Show more
8
BIGTREETECHBIGTREETECH SKR 3 EZ Control Board 32bit New Upgrade Silent Board Support EZ2209/ EZ5160/ EZ2130 Stepper Driver Compatible TFT Series Touch Screen, DIY for BIQU B1/Ender 3/ Ender 5/ CR10 3D Printer
Main highlights- Using 32-bit ARM Cortex-M7 series STM32H723VGT6 main control chip with a main frequency of 480MHz, the performance has greatly improved
- The power chip adopts TPS5450-5A, which supports DC12/24V power input. The output current of the chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry-Pi
- The numerical control fan realizes 24V, 12V, 5V voltage selection through the external power supply module, eliminating the need for the operation of the customer's external transformer module, thereby reducing the probability of damage to the motherboard
- The motor power supply supports up to 48V, and for the larger voltage when using TMC5160 and EZ5160, an isolation chip is used to protect the mainboard from burning IO
- SKR 3 EZ 3D Control Board adopts two kinds of driver sockets, which are compatible with both BIGTREETECH EZ series driver modules and TMC series driver modules
8.8Very Good
View offer on:
Show more
9
CJMHFRNKCompatible for BIGTREETECH Eddy Auto Leveling Kit 3D Printer Part for Ender-3 for BIQU B1 Printer H2 Series Extruder(Eddy Coil)
Main highlights- Features advanced auto leveling technology for precise bed leveling and improved print quality
- Enhances overall printing efficiency and reduces the time spent on manual leveling adjustments
- Easy to install with user-friendly instructions, suitable for both beginners and experienced users
- Durable construction ensures long-lasting performance and reliability during printing
- Compatible For BIGTREETECH Eddy Auto Leveling Kit 3D Printer Part For Ender-3 For BIQU B1 Printer H2 Series Extruder
8.5Good
View offer on:
Show more
10
PofuntreeH2O Water Cooling Extruder Water Cooled Direct Drive Extruder All Metal Hotend 500℃ High Temperature Printing for Ender-3 CR10 BIQU B1 BX Mega S
Main highlights- Stainless Steel Dual Gear: H2O extruder dual gear inherit the quality stainless steel output and transmission gears from extruder H2 V2.0 for higher surface finish, faster extrusion of filament and high precision printing. The narrowed 0.25 diameter output gear contributes a lot to its smooth extrusion.
- Non-block Extrusion & Easy Assembly: The Ra0.4 inner wall of its hardened-steel nozzle, the dual gear, and the high temperature resistance heat break works together to ensure an extremely smooth extrusion. Comes with all needed tools, cable, accessories and a comprehensive instruction, our H2O extruder is very easy to assemble.
- Innovative Water Cooling Extruder: BQIU H2O features the first water cooling hotend in 3D printing industry. Used with the water cooling kits (need to buy separately), working temperature of BIQU H2O extruder itself can be lower than 50℃, which can realize fast and efficient cooling and excellent printing at 500℃ high printing temperature. Powerful heat dissipation of H2O water cooling system can also greatly prolong its service life.
- About Compatibility: H2O extruder can be directly mounted on all BIQU 3D printers: B1/B1 SE/B1 SE Plus/BX. For Ender 3 CR10 and 3D printers of other brands, you need to change your motherboard to SKR 2/SKR 3/ SKR 3 EZ/SKR V1.4/SKR V1.4 Turbo or mainboards with max31865 and pt 100 interfaces to use our H2O extruder. And please feel free to contact us if you get in trouble.
- 500°C High Temperature Printing: Brand-new H2O extruder is an upgraded version of H2 V2.0 extruder. The 70W heating rod, nickle-plated red copper heat block and hardened-steel nozzle of H2O extruder makes 500°C high temp. printing possible and it is compatible with filaments PLA, ABS, PETG, TPU, PP, PC, Nylon and more.
8.3Good
View offer on:
Show more
Similar products on Amazon
