10 Best Axis Probe Cnc In The Us - Black Friday 2024
CNCTOPBAOS MMP25 3D Light Edge Finder with Ceramic Probe,to Find CNC Milling Lathe Machining Center,Accuracy 0.001mm X,Y,Z Axis Three Coordinate Measurement Centering Rod Touch Probe Tool Dividing Rod
Main highlights- Product: The 3D edge finder supports X,Y,Z three-coordinate direction measurement,reciprocating positioning accuracy ≤ 0.001mm; Probe direction: +-X +-Y +Z; Probe safety stroke: X.Y plane +-15°; Z direction +5mm; Trigger life:5,000,000 times
- No need for conductivity: The principle of conductivity is not required. The workpiece material and the machine tool spindle are not conductive and can also be measured
- Measurable insulating material: Metal, bakelite, wooden board, plastic, etc
- High accuracy: The measurement accuracy ≤ 0.001mm, and the repeatability ≤ 0.001mm; The edge finder adopts a sturdy sealed shell, and the body is made of stainless steel with a ceramic ball head; It has good structural stability, excellent performance, and high measurement accuracy
- Applications: Widely used for positioning and measurement of CNC lathes,milling machine etc,exceeding the safety range may damage the probe and probe,and does not support the detection of insulation materials and insulated machine tools
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
PGFUNPGFUN CNC 3D Touch Probe XYZ Axis Edge Finder 3-Coordinate Measuring Sensor Kit with 8 mm Shank & 2.0 mm Ruby Ball Tip (NPN-NO)
Main highlights- Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it look great and protects the touch probe well from dropping.
- This 3-coordinate XYZ axis CNC probe is designed for wide DIY CNC applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing. ( Tips: it's developed for DIY application, not recommended for industrial use)
- Package Includes: 3D touch probe x 1, cable x 2 m/ 6.5ft, allen wrench x 1, straight probe tip x 1, wire connector kit x 1
- Main Specs: power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: XY- 12°, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
- Application: theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
9.6Exceptional
View offer on:
Show more
3
PGFUNPGFUN DIY CNC 3D Digitizing Touch Probe Upgraded NPN-NC XYZ Axis Edge Finder Waterproof 3 Coordinate Measuring Sensor Kit with 6mm Shank
Main highlights- Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it looks great and protects the touch probe well from dropping. Besides, This tool can be converted to a tool setter by a tool setter base and flat tip (plate).
- This 3-coordinate XYZ axis CNC probe is not recommended for new DIY users, before purchasing, please make sure your machine needs an NPN-NC touch probe, rather than an NPN-NO probe, and you know how to wire and how to connect to the software or edit the scripts.
- Main Specs: power: DC5-24V, NPN-NC wiring (Low-level IO signal output when powered and turns to High-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- ±4mm/0.16 in, Y- ±4mm/ 0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.8N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
- Functions & Features: fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing.
- Application: theoretically it can be compatible with most 3-wire probe systems, like MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, GRBL, Centroid Acorn, Mach Motion, Masso, EMC2, and other CNC control software with a probing routine and a control board that will accept probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
9.4Excellent
View offer on:
Show more
4
Dog River ToolsDog River Tools CNC Touch Probe Plate, X Y Z Axis Tool Setting, for Carbide Motion and Shapeoko 3
Main highlights- Touch probes help reduce setup times, increase machine usage, and improve the dimensional accuracy of the finished project
- The probe plate is an aluminum block and has a 60 inch cord to connect to the control board and 10 inch wire alligator clips
- Supports the 4 different types of probing X Y Z axis (otherwise known as corner probing) X left edge, Y front edge, Z top of your material
- Probing the best practice for maximizing the efficiency, quality, capability and accuracy of machine tools
- All kits now include a 2-3 pin adapter cable, making it compatible with all configurations of the Shapeoko including, belt Z, HDZ and Z-Plus
9.3Excellent
View offer on:
Show more
5
PGFUNPGFUN CNC 3D Touch Probe Upgraded XYZ Axis Anti-roll Edge Finder Waterproof 3 Coordinate Measuring Sensor Kit with 6mm Shank & 6.5 Ft Cable, Compatible with Mach3 (Edge Finder-NO)
Main highlights- Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it looks great and protects the touch probe well from dropping. Besides, This tool can be converted to a tool setter by a tool setter base and flat tip.
- This 3 coordinate XYZ axis CNC probe is designed for wide DIY cnc applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing.( Tips: it's developed for DIY application, not recommended for industrial use)
- Package Include: 3D touch probe x 1, cable x 2 m/ 6.5ft, allen wrench x 1, straight probe tip x 1, wire connector kit x 1 (to solve the lack of control board wiring ports and extend the wire ).
- Main Specs: power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- ±4mm/0.16 in, Y- ±4mm/ 0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
- Application: theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
9.1Excellent
View offer on:
Show more
6
RATTMMOTORRATTMMOTOR Normally Open Mach3 CNC Automatic Tool Sensor Gauge Changer CNC Z Axis Probe Tool Touch Sensor Setter Setting 4 Wires for CNC Router Engraver Machine
Main highlights- 【Parameter】This is a normally open 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.
- 【Material】The housing material of this tool setter is made of 4S grinding grade material. The bottom magnet design can be directly connected to the machine and firmly adsorbed to the body. The contact material is made of super hard alloy, the design is exquisite and the installation is simple.
- 【Feature-2】The tool setter will send out an alarm signal in time when it is over-travel to avoid other troubles caused by equipment operation. Moreover, the tool setter has strong anti-interference. The protruding sharp corner of the tool directly touches the tool tip related to the machining size, detects its value and size, and outputs the signal. It has higher accuracy than the average value obtained by converting the amount of light and electricity.
- 【Feature-1】This tool setting instrument is designed with dustproof and waterproof structure, which can still have strong durability under the condition of coolant and iron filings. It does not need a built-in amplifier and will not be caused deviations by the location temperature and power supply voltage fluctuations of the tool setting instrument, which can be directly input to the NC program.
- 【Description】The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of no vibration and malfunction, the thermal deformation of the machine can be corrected according to the rated voltage and current and the specified speed.
8.8Very Good
View offer on:
Show more
7
YIDOFENGYIDOFENG CNC 3D Touch Probe Edge Finder, V5 NPN NO CNC 3D Edge Finder with Tip, XYZ Coordinate Measuring Sensor with 2M Cable Compatible with Mach3 and GRBL,for GRBL CNC Router Machine
Main highlights- 【PARAMETER SPECIFICATION】 power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- ±4mm/0.16 in, Y- ±4mm/ 0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
- 【PACKAGE INCLUDE】1PC 3D touch probe+1PC Stainless steel probe tip+1PC cable+1PC Storage box for storing probe
- 【MATERIAL 】 ①Shell is made of fine frosted black oxidized aluminum alloy with a flat surface anti-roll design;②3D touch probe is machined from stainless steel up and down, and the ball head is made of tungsten steel ball, which has the advantage of wear resistance.(Note:the concentricity is fine-tuned to within 0.05 before delivery. Please measure and adjust it by yourself after receiving the goods. Be sure to use ER11 spring chucks of AAA or above, otherwise the concentricity of the probe tip will be affected)
- 【APPLICATION AND FUNCTION】Suitable for GRBL control board and Mach3 systems etc. By connecting the CNC signal input port (tool setting port),it can achieve quickly finding the mind, looking for edges, looking for a round heart, measuring workbench and other functions.effectively avoid the secondary clamping of the workpiece during processing.( Tips: it's developed for DIY application, not recommended for industrial use)
- 【AFTER SALES SERVICE】 If you get stuck, Contact us with any questions that arise. Our customer service team is always ready to assist with any questions you may have.
- 【3 WIRES】NPN-NO 3 wires: Red-VCC (DC5-24V power);Yellow: IO/ Signal Output;Black- GND(DCM); Indicator light: green light when power on, red light after triggering
8.7Very Good
View offer on:
Show more
8
CNCTOPBAOSCNCTOPBAOS 3D Light CNC Edge Finder to Find Desktop Center,High Precision 0.01mm X,Y,Z Axis Three Coordinate Measurement Centering Rod,CNC Milling Machine Probe Tool Machining Center Dividing Rod 40mm
Main highlights- Waterproof: Support dustproof and a small amount of dripping and waterproofing not support long term dripping and washing, can maximize the service life of the probe
- Product: The 3D edge finder supports X,Y,Z three-coordinate/direction measurement,reciprocating positioning accuracy ≤ 0.01,XY deflection range 0-6°, Z-direction telescoping range of 1 mm; Probe direction：+-X +-Y +Z; Probe safety stroke：XY +-15º, Z +5 mm; Trigger life:5,000,000 times; Usage range: Metal
- High accuracy: The edge finder adopts a sturdy sealed shell,is made of anodized aluminum alloy,with with a flat anti roll design and a tungsten steel ball head,good structural stability, excellent performance, and high measurement accuracy. Measuring accuracy is less than 0.01 mm,repeatability is less than 0.01 mm
- Easy to use: The the probe can be rotated 180 degrees,no need to rotate the spindle during measurement and centering,more flexible and convenient
- Applications: Widely used for positioning and measurement of CNC lathes,milling machine etc,exceeding the safety range may damage the probe and probe,and does not support the detection of insulation materials and insulated machine tools
8.6Very Good
View offer on:
Show more
9
RATTMMOTORRATTMMOTOR Normally Closed Mach3 CNC Automatic Tool Sensor Gauge Changer CNC Z Axis Probe Tool Touch Sensor Setter Setting 4 Wires for CNC Router Engraver Machine
Main highlights- 【Parameter】This is a normally closed 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.
- 【Material】The housing material of this tool setter is made of 4S grinding grade material. The bottom magnet design can be directly connected to the machine and firmly adsorbed to the body. The contact material is made of super hard alloy, the design is exquisite and the installation is simple.
- 【Feature-2】The tool setter will send out an alarm signal in time when it is over-travel to avoid other troubles caused by equipment operation. Moreover, the tool setter has strong anti-interference. The protruding sharp corner of the tool directly touches the tool tip related to the machining size, detects its value and size, and outputs the signal. It has higher accuracy than the average value obtained by converting the amount of light and electricity.
- 【Feature-1】This tool setting instrument is designed with dustproof and waterproof structure, which can still have strong durability under the condition of coolant and iron filings. It does not need a built-in amplifier and will not be caused deviations by the location temperature and power supply voltage fluctuations of the tool setting instrument, which can be directly input to the NC program.
- 【Description】The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of no vibration and malfunction, the thermal deformation of the machine can be corrected according to the rated voltage and current and the specified speed.
8.4Good
View offer on:
Show more
10
DiydegCNC 3D Finder, Professional High Accuracy Universal 3D Sensor Probe, Waterproof Multifunctional 3D Locator with Tungsten Steel Tip for X, Y and Z Axis, for Mach3, for GRBL CNC
Main highlights- 【MULTIPLE FUNCTIONS】This high accuracy finder set features with fast finding, circle center finding and table shape measurement functions, solve the trouble of clamping workpiece positioning.
- 【LIGHT DISPLAY】This CNC 3D measuring tool comes with light prompt, the green light is displayed after power on, and the red light is displayed after the , intuitive and clear.
- 【FOR CNC EQUIPMENT】This 3 dimensional finder with probe tip can locate in X,Y and Z axis, it is compatible for Mach3, for GRBL CNC equipment, support XYZ coordinate stroke, simple in wiring, has strong practicability.
- 【EXCELLENT MATERIAL】This 3D finder's housing is made of anodized aluminum alloy, with flat anti roll design, and has stainless steel needle and tungsten steel ball head. and adopts waterproof dustproof design, can maximize the service life of the probe.
- 【 QUALITY ASSURANCE】We are very confident in the quality of this 3D finder, and provide or refund for it. Please feel to reach us if you have any questions about your purchase. We will solve your problem within 24 hours.
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for axis probe cnc
