10 Best Audio Preamplifier With Ne5532 In The Us - Black Friday 2024
Best Choice1
SanpylSound Preamplifier, 20dB Dual Op Amp NE5532 Stereo Preamp BT5.0 Audio Preamp, with 3.5mm Port, for Phono Turntable Speaker, for Home Audio Amplifier System
Main highlights- [Sound Distribution And Mixing] Sound distribution function, three sets of interfaces can be output at the same time, two sets of interfaces, a 3.5mm headphone interface; sound mixing function, 3.5mm interface input and Bluetooth sound can work, mix and output at the same time.
- [Power Supply Specifications] DC5V‑12V power supply, 5v220ma, 12v85ma working current, stereo sound preamplifier can be powered by 12V power adapter, mobile power or cell phone charging head. Please use premium power adapter or charging head to avoid AC noise (without plug).
- [Long Distance] Sound preamplifier with HiFi Bluetooth chip, external antenna to achieve long distance Bluetooth reception, measured up to 50m/164ft or more, with volume adjustment knob, you can freely adjust the volume.
- [High Performance] Sound amplification function, gain 20dB (10x), drive a variety of sound amplifiers and high resistance, low headphone without pressure. Dual op amp NE5532, high frequency electrolytic capacitors, noise reduction circuit design, no background noise, effective gain sound, improve sound quality.
- [Compatible Devices] Input: DVD, CD, set top box, MP3, TV, cell phone, computer, tablet, microphone, phono turntable, sound card, guitar, bass, electronic musical instruments, game consoles and more. Output: Speakers, subwoofer, reverb, AV receiver, post amplifier, headphone, etc.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ATNEDCVHAtNeDcVh Mini Small Stereo Audio preamplifier, Headphone Amplifier, Gain 20dB Phono Turntable Phonograph preamp, Dual op amp NE5532 with RCA 3.5mm Input to RCA 3.5mm Output
9.9 worth the money9.5 Sound level9.7Exceptional
View offer on:
Show more
3
WalfrontNE5532 Amplifier Kit Stereo Preamplifier Volume Control Board with Treble Midrange and Bass Tone Controls DIY Kit Preamp Module
Main highlights- Wide frequency band and small noise, easy to use
- The chip has high conversion rate and strong drive ability, which will greatly help your project
- Small clutter interference of power grid, stable and performance
- Power supply circuit adopts full bridge rectifier, the four pins of rectifier is respectively in parallel connected with decoupling capacitor, effectively eliminate the high frequency interference of AC power grid
- Pay attention that it can not use 12V battery or DC directly as power supply
9.4Excellent
View offer on:
Show more
4
HiLetgoHiLetgo NE5532 OP-AMP HiFi Preamplifier Pre Amplifier Bass Treble Balance Volume Tone Control Board
Main highlights- Supply Voltage: DC12V-25V AC9V-18V; Frequency:20-20KHz
- Potentiometer adjustment function:Treble+Mediant+Bass+Volume
- NE5532 OP-AMP HIFI Preamplifier Pre Amplifier
- It can adjust the high and medium bass of the sound source
9.3Excellent
View offer on:
Show more
5
LiebeWHMini Stereo Audio Preamplifier NE5532 DC 12V Small Headphone Amplifier with Bass Treble Control for Audio Devices
Main highlights- WIDELY COMPATIBLE WITH ALL AUDIO DEVICES: Inputs fit DVDs, CDs, set top boxes, MP3s, TVs, cell phones, computers, tablets, turntables, sound cards, guitars, basses, electronic musical instruments, game consoles or other devices. Output suitable for speakers, subwoofers, Sound Blasters, reverbs, AV receivers, post amps, headphones, etc.
- VOLUME CONTROL: Full metal housing can ensure good quality, with bass and treble control, can be used as preamp or volume controller for PC computer
- SAME INPUT AND OUTPUT: This machine adopts the circuit pre attenuation compensation and NE5532, when the power is off, the attenuation is ‑15db, when the power is on, the NE5532 amplifies the compensation, and the gain is 0db, that is, the input and output are the same
- LOW POWER CONSUMPTION: The DC power supply should try to use a excellent low power supply. When the input amplitude is less than 1v, 12v power supply is sufficient. When the input is greater than 1v, please increase the power supply voltage, the maximum power supply voltage is 24v
- EASY SETUP: No special software, apps or drivers needed to install, a true plug and play digital audio adapter
9.2Excellent
View offer on:
Show more
6
FafeicyMini Electronic Audio Stereo Preamplifier, Small Stereo Audio Preamplifier Amplifier Mini Stereo Audio Preamplifier Ne5532 with 3.5mm Input Output
Main highlights- Wide compatibility with all audio devices: Inputs fit DVD, CD, set-top boxes, MP3s, TVs, cell phones, computers, tablets, electronic musical instruments, game consoles or other devices. The output is suitable for speakers, subwoofers, reverbs, AV receivers, post amps, headphones, etc. It is a good choice for a wide range of applications.
- Volume Control: Full metal housing ensures good sound quality, with bass and treble controls, can be used as a preamp or volume controller for PC, OS X or computer.
- The Input and Output Are the Same: Mini stereo audio preamplifier adopts NE5532 circuit for pre-attenuation compensation and tone. When power is off, the attenuation is -15db. When power is on, NE5532 amplifies and compensates, and the gain is 0db. At the same time, the device will reduce the interference of noise and make the sound more pleasing to the ear.
- Power Supply Voltage: Mini electronic audio stereo preamplifier DC power supply should try to use low power supply. When the input amplitude is less than 1v, 12v power supply is sufficient. When the input is greater than 1v, please increase the power supply voltage, the maximum power supply voltage is 24v, low energy consumption and environmental protection.
- EASY SETUP: No special software, apps or drivers to install, plug it right in and you're ready to go, no complicated installation required.
9.1Excellent
View offer on:
Show more
7
HyuduoMini Stereo Audio Preamplifier Small Headphone Amplifier NE5532 with 3.5mm Input Output
Main highlights- WIDELY COMPATIBLE WITH ALL AUDIO DEVICES: Inputs fit DVDs, CDs, set top boxes, MP3s, TVs, cell phones, computers, tablets, turntables, sound cards, guitars, basses, electronic musical instruments, game consoles or other devices. Output suitable for speakers, subwoofers, Sound Blasters, reverbs, AV receivers, post amps, headphones, etc.
- VOLUME CONTROL: Full metal housing can ensure good quality, with bass and treble control, can be used as preamp or volume controller for PC, for OS X, or computer.Hyuduo is committed to providing customers with high-quality products and thoughtful service.
- SAME INPUT AND OUTPUT: This machine adopts the circuit pre attenuation compensation and tone NE5532, when the power is off, the attenuation is ‑15db, when the power is on, the NE5532 amplifies the compensation, and the gain is 0db, that is, the input and output signals are the same
- LOW POWER CONSUMPTION: The DC power supply should try to use a excellent low ripple power supply. When the input signal amplitude is less than 1v, 12v power supply is sufficient. When the input signal is greater than 1v, please increase the power supply voltage, the maximum power supply voltage is 24v
- EASY SETUP: No special software, apps or drivers needed to install, a true plug and play digital audio adapter,We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time.
9.0Excellent
View offer on:
Show more
8
YWBL-WHAudio Amplifier Board NE5532 Pre-Amplifier Tone Board Volume Tone Control Board Kits HiFi Amplifier for Volume Control (Board)
Main highlights- Volume adjustment includes treble, midrange, bass and total volume, which widely used in DIY bookshelf loudspeaker, car audio components, home theater audio system and more.
- Tone board installation is simple, and it does not require particularly complicated operations.
- Support DC 12-24V / AC 8-19V, this power amplifier board is entitled with high performance according to strict rule.
- Single power pre-level tone board supports NE5532 amplifier, easy to use in the practical life.
- Amplifier front plate is in fever class, and it works as a front module of high, medium and low volume.
8.7Very Good
View offer on:
Show more
9
ziaoouziaoou AU-10X NE5532 Audio Signal Preamplifier Headphone Pre AMP Board Gain 20Db 3.5MM Volume Control Tone DC 12V
Main highlights- This circuit can be used when the sound of your device is small when connected to the power amplifier. It is suitable for small audio signal amplification, the amplification factor is 10 times (20db), and the front 3.5mm interface can be connected to headphones;
- The amplifier chip is a dual op amp NE5532
- Power supply: DC9-19V
- Input and output are 3.5mm headphone jack or
- Feature
8.6Very Good
View offer on:
Show more
10
GenericPhono Preamp, Mini Stereo Audio Preamplifier, Headphone Amplifier, Phonograph Preamp for Turntable Pre amp, Gain 20dB, Dual OP AMP NE5532, RCA 3.5mm Input to RCA 3.5mm Output
Main highlights- Phono preamp is compact and easy to carry, convenient for use in different audio setups, widely compatible with various audio devices, such as DVD players, CD players, smartphones, computers, microphones, guitars, game consoles, and more
- Phono preamp designed with dual OP AMP NE5532 circuit for noise reduction to minimize background noise, resulting in a clean and clear audio signal and improved sound quality
- Phono preamp can amplify weak signals, such as those from a phono turntable, into line-level signals, improving signal strength and quality
- It is important to note that this device serves as a preamplifier and cannot be used as a power amplifier to drive passive speakers. It is intended for signal amplification and signal processing purposes.
- Headphone amp powered by DC 9-19V and allows for freely adjustable volume control, giving users flexibility in setting their desired audio levels
- Headphone amp features multiple input options： RCA (L/R) and 3.5mm inputs, and offers various output options： RCA (L/R), 3.5mm, and headphone outputs
- Headphone amp can directly drive headphones for audio playback, and the headphone output port is not shared with other output ports. It supports headphones with a maximum impedance of 16 ohms
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for audio preamplifier with ne5532
