10 Best Atomization Ultrasonic In The Us - Black Friday 2024
Best Choice1
Aitoserlea304 Stainless Steel Ultrasonic Atomization Nozzle Air Atomizer Spray Nozzle Dry Fog Mist Air Atomizing Nozzle (30 Degree)
Main highlights- Significantly reduce fugitive dust, humidifying, lubricating, cleaning, coating, spraying
- Low pressure generates perfect fogging effect it utilizes compressed air and plain water to produce these 10-20 micron droplets (true fog)
- Long service life, wear and corrosion resistance from the perspective of maintenance, since ultrasonic atomizing nozzle does not depend on high pressure to achieve the maximum atomizing water effect, the wear problem of it is almost completely eliminated
- Excellent dust suppression/control effect ultrasonic air atomizing nozzle produces very fine dry fog to agglomerate and remove airborne dust particles from various material handling and processing operations
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DUNSIHUIDUNSIHUI 2 Pack DC 3.7V-12V D20mm 113KHz Ultrasonic Mist Maker Atomization Maker Module DIY Humidifier with PCB module
Main highlights- ★Widely used in various types of medical micro atomization, USB humidifiers, perfume atomizers, aromatherapy atomizers, auto parts, essential oil atomizers, various types of non-cotton humidifiers, and beauty products. Atomization device.
- ★It can work well over the water's surface, absorbent sponge or towel,high conversion efficiency, large amount of atomization, high atomization height.
- ★Easy to use. After charge the frequency sweep driver board, press the key to start.
- ★Circular shape, middle spray, stable quality,Not easy to block
- ★ 20mm diameter ultrasonic atomizer plate povides with more finer particles,and the tabletop is not wet.
9.7Exceptional
View offer on:
Show more
3
EC BuyingEC Buying 3Pcs USB Humidifier Module USB Spray Module Circuit Board Atomization Module 5V Atomization Plate Circuit Board Atomization Module Atomizer DIY Incubation Experimental Equipment
Main highlights- There is waterproof adhesive on the welding points of the wires to prevent circuit breakers, and a silver oxide layer on the surface of the atomizing sheet to protect the coating from oxidation
- There are two wires, the red wire is positive and the black wire is negative. The wire is 80mm long and there are terminal blocks at the end of the wire
- The left and right welding points of the switch can be welded together to realize power on, i.e. spray, without the need to control the switch
- The atomizing piece needs to be used together with the circuit board with the same frequency to achieve the ideal spray amount
- High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate
9.5Excellent
View offer on:
Show more
4
DWEIIDWEII 4Pcs USB Humidifier Module USB Spray Module Circuit Board Atomization Module 5V Atomization Plate Circuit Board Atomization Module Atomizer DIY Incubation Experimental Equipment
Main highlights- ❃❃There are two wires, the red wire is positive and the black wire is negative. The wire is 80mm long and there are terminal blocks at the end of the wire
- ❃❃Fine Spray Particles: The atomization plate adopts the design of intermediate spray, 5um ultra fine spray aperture and 740 ultra dense spray aperture. Spray particles are fine and do not wet the desktop.
- ❃❃Feature: Low driving voltage, low power, low impedance, stable waveform, high conversion efficiency.
- ❃❃Application: Ultrasonic mist maker is a humidifier DIY kit, which is widely used in atomization equipment such as USB humidifier, perfume atomizer, aromatherapy atomizer, etc.
- ❃❃
9.4Excellent
View offer on:
Show more
5
AITIAOAITIAO 6PCS USB Humidifieration Atomization Disc Spray Humidifier Module 5V Mirco USB Humidifier Atomization Drive Circuit Board with Timing Switchfor DIY Home
Main highlights- Wide Application: Ultrasonic mist maker is a humidifier DIY kit, which is widely used in atomization equipment such as USB humidifier, perfume atomizer, aromatherapy atomizer, etc.
- Two spray modes: press the switch for the first time is continuous spray mode: LED light is always on, always spray, spray 4 hours after the automatic shutdown protection.
- The white piezoelectric ceramic ring surface is the front spray surface, which is installed upward, All steel sheet surface is the suction surface on the back, installed downwards. The red wire is positive and the black wire is negative.
- Press the switch for the second time is indirect spray mode: LED flashes, spray 10 seconds, stop spraying for 5 seconds, and so on, spray 12 hours after the automatic shutdown protection. Press the switch for the third time to turn off the machine.
- High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate, spray variety, timed shutdown.
9.1Excellent
View offer on:
Show more
6
Tingbowie2 Pack Atomization Disc mist maker Ultrasonic Atomization Module Ultrasonic fogger DIY Humidifier with PCB 5V
Main highlights- Work Voltage:DC 4.5V~5.5V, Work Temperature:0℃~85℃, Work Humidity:10%~90%RH.
- Widely used in the ultrasonic atomization devices, USB humidifier, perfume atomizer, aromatherapy atomizer and other atomization devices.
- It can work well over the water's surface, absorbent sponge or towelwith more finer particles and higher spray level.
- It Is A 108KHz 20mm Micro USB Humidifier With Driver. It Will Keep Work after Power-ON.
- Distinguish the front and Back of the Atomizer. The front Has White Piezoelectric Ceramic Ring and Pads. Place the Atomizer on the Surface of the Water and Cannot Be Placed in Water. Backside Contact Water Surface. Provide Power Supply Form Micro USB.It Will Keep Work after Power-ON.
8.8Very Good
View offer on:
Show more
7
SazkJere23% OffSazkJere 4Pcs USB Humidifieration Atomization Disc Mirco Interface Atomization Drive Circuit Board DC 5V for DIY Home
Main highlights- Two spray modes: press the switch for the first time is continuous spray mode: LED light is always on, always spray, spray 4 hours after the automatic shutdown protection. Press the switch for the second time is indirect spray mode: LED flashes, spray 10 seconds, stop spraying for 5 seconds, and so on, spray 12 hours after the automatic shutdown protection. Press the switch for the third time to turn off the machine.
- The white piezoelectric ceramic ring surface is the front spray surface, which is installed upward, All steel sheet surface is the suction surface on the back, installed downwards. The red wire is positive and the black wire is negative.
- The atomizing piece needs to be used together with the circuit board with the same frequency to achieve the ideal spray amount.
- Spray Principle: Piezoelectric ceramics drive metal plate high-frequency oscillation, ultrasonic liquid atomization. Micrometer-fine water molecules atomize water throughmicropores and disperse it into the air. Application: DIY spray, plant humidification, landscaping atomization.
- High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate, spray variety, timed shutdown.
8.6Very Good
View offer on:
Show more
8
OCESTOREOCESTORE 2 Pack DC 3.7V-12V D20mm 113KHz Ultrasonic Mist Maker Atomization Maker Module DIY Humidifier with PCB module
Main highlights- ★Widely used in various types of medical micro atomization, USB humidifiers, perfume atomizers, aromatherapy atomizers, auto parts, essential oil atomizers, various types of non-cotton humidifiers, and beauty products. Atomization device.
- ★It can work well over the water's surface, absorbent sponge or towel,high conversion efficiency, large amount of atomization, high atomization height.
- ★Easy to use. After charge the frequency sweep driver board, press the key to start.
- ★Circular shape, middle spray, stable quality,Not easy to block
- ★ 20mm diameter ultrasonic atomizer plate povides with more finer particles,and the tabletop is not wet
8.3Good
View offer on:
Show more
9
FOFMITISix Spray Humidifier Module DC5V Atomization Control Board Ultrasonic Atomizer TYPE-C Interface Mist Maker Driver Circuit Board
Main highlights- Six Spray Humidifier Module：Micro hole atomization disc, fine mist atomization, large atomization, high atomization, nonwetting tabletop
- Product name: four spray atomization driving board; Rated voltage: DC 5V; Atomization frequency: 108KHZ ± 2KHZ; Rated current: 300MA; Power: 2.5-3W
- Multi-mode spray: continuous spray mode, dynamic spray mode, indirect spray mode
- Material: 1.2mmFR-4; PCB size: 50 * 25 * 1.2mm; Atmosphere lighting: white light
- Application: DIY self-made, plant moisturizing, product application
8.1Good
View offer on:
Show more
10
DONGKERDONGKER 5 PCS Ultrasonic Mist Maker,1.70MHz 25mm Atomization Disc Mist Maker with Wire & Sealing Ring
Main highlights- Specification:25*1.2mm
- SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied.
- Resonance Impedance:<2 ohm
- Resonance Frequency:1.70MHz
- Ceramic Disc Diameter:25mm(not include rubber ring) 12V, can not be directly connected to the use of the need to use the control panel can be sprayed.
7.9Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for atomization ultrasonic
