10 Best Atomization Humidifier In The Us - Black Friday 2024
AITIAO 6PCS USB Humidifieration Atomization Disc Spray Humidifier Module 5V Mirco USB Humidifier Atomization Drive Circuit Board with Timing Switchfor DIY Home
Main highlights- Wide Application: Ultrasonic mist maker is a humidifier DIY kit, which is widely used in atomization equipment such as USB humidifier, perfume atomizer, aromatherapy atomizer, etc.
- Two spray modes: press the switch for the first time is continuous spray mode: LED light is always on, always spray, spray 4 hours after the automatic shutdown protection.
- The white piezoelectric ceramic ring surface is the front spray surface, which is installed upward, All steel sheet surface is the suction surface on the back, installed downwards. The red wire is positive and the black wire is negative.
- Press the switch for the second time is indirect spray mode: LED flashes, spray 10 seconds, stop spraying for 5 seconds, and so on, spray 12 hours after the automatic shutdown protection. Press the switch for the third time to turn off the machine.
- High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate, spray variety, timed shutdown.
- Curious about how we select the top products for you? Explore How It Works
Atomization Disc, 5V Module USB Humidifier Atomization Plate Circuit Board Atomization Module with Timing Switch 20mm 110KHz Mist Atomizer DIY Humidifier with PCB 5V for Home for Family (4)
Main highlights- Use to Widely: Can be used for ultra-sonic mist devices, USB humidifier, perfume spray, aromatherapy spray and other mist devices.
- Feature: Low driving voltage, low power, low impedance, stable waveform, high conversion efficiency.
- Eco-friendly: The circuit board using environmentally friendly electronic components.
- Durable: Surface of the sheet adopts an oxidation-resistant silver layer to protect the coating process, long life.
- Design: Round ring plate, middle spray, 5um ultra-fine spray aperture, 740 ultra-dense spray holes.
EC Buying 3Pcs USB Humidifier Module USB Spray Module Circuit Board Atomization Module 5V Atomization Plate Circuit Board Atomization Module Atomizer DIY Incubation Experimental Equipment
Main highlights- There is waterproof adhesive on the welding points of the wires to prevent circuit breakers, and a silver oxide layer on the surface of the atomizing sheet to protect the coating from oxidation
- There are two wires, the red wire is positive and the black wire is negative. The wire is 80mm long and there are terminal blocks at the end of the wire
- The left and right welding points of the switch can be welded together to realize power on, i.e. spray, without the need to control the switch
- The atomizing piece needs to be used together with the circuit board with the same frequency to achieve the ideal spray amount
- High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate
DWEII 4Pcs USB Humidifier Module USB Spray Module Circuit Board Atomization Module 5V Atomization Plate Circuit Board Atomization Module Atomizer DIY Incubation Experimental Equipment
Main highlights- ❃❃There are two wires, the red wire is positive and the black wire is negative. The wire is 80mm long and there are terminal blocks at the end of the wire
- ❃❃Fine Spray Particles: The atomization plate adopts the design of intermediate spray, 5um ultra fine spray aperture and 740 ultra dense spray aperture. Spray particles are fine and do not wet the desktop.
- ❃❃Feature: Low driving voltage, low power, low impedance, stable waveform, high conversion efficiency.
- ❃❃Application: Ultrasonic mist maker is a humidifier DIY kit, which is widely used in atomization equipment such as USB humidifier, perfume atomizer, aromatherapy atomizer, etc.
- ❃❃
SazkJere 4Pcs USB Humidifieration Atomization Disc Mirco Interface Atomization Drive Circuit Board DC 5V for DIY Home
Main highlights- Two spray modes: press the switch for the first time is continuous spray mode: LED light is always on, always spray, spray 4 hours after the automatic shutdown protection. Press the switch for the second time is indirect spray mode: LED flashes, spray 10 seconds, stop spraying for 5 seconds, and so on, spray 12 hours after the automatic shutdown protection. Press the switch for the third time to turn off the machine.
- The white piezoelectric ceramic ring surface is the front spray surface, which is installed upward, All steel sheet surface is the suction surface on the back, installed downwards. The red wire is positive and the black wire is negative.
- The atomizing piece needs to be used together with the circuit board with the same frequency to achieve the ideal spray amount.
- Spray Principle: Piezoelectric ceramics drive metal plate high-frequency oscillation, ultrasonic liquid atomization. Micrometer-fine water molecules atomize water throughmicropores and disperse it into the air. Application: DIY spray, plant humidification, landscaping atomization.
- High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate, spray variety, timed shutdown.
EC Buying Atomization Module Double Spray USB Humidifier Dual Spray Driving Circuit Board Atomization Experimental Equipment Ultrasonic DIY
Main highlights- The atomizer shall be used at the same frequency as the circuit board to achieve the ideal spray amount
- Rated voltage: DC 5V; Rated current: 300mA; Power: 2-3W; Resonant frequency: 108-110KHz
- Material 1.2mm FR-4; Size 33.9x22.6x17mm
- Characteristic: large amount of atomization, fine atomization particles, high atomization spray
- Application: DIY self-made, plant moisturizing, landscape atomization
Atomization Disc, 5V Module USB Humidifier Atomization Plate Circuit Board Atomization Module with Timing Switch for Home for Family
Main highlights- Work Voltage:DC 4.5V~5.0V, Work Temperature:0℃~85℃, Work Humidity:10%~90%RH
- Widely used in the ultrasonic atomization devices, USB humidifier, perfume atomizer, aromatherapy atomizer and other atomization devices.
- It can work well over the water's surface, absorbent sponge or towelwith more finer particles and higher spray level.
- It Is A 108KHz 20mm Micro USB Humidifier With Driver. It Will Keep Work after Power-ON.
- Distinguish the front and Back of the Atomizer. The front Has White Piezoelectric Ceramic Ring and Pads. Place the Atomizer on the Surface of the Water and Cannot Be Placed in Water. Backside Contact Water Surface. Provide Power Supply Form Micro USB.It Will Keep Work after Power-ON.
Dual Spray Atomization Module USB Humidifier Driving Circuit Board Atomization Experimental Equipment Ultrasonic DIY Incubation
Main highlights- Product name: four spray atomization driving board; Rated voltage: DC 5V; Atomization frequency: 108KHZ ± 2KHZ; Rated current: 300MA; Power: 2.5-3W
- Multi-mode spray: continuous spray mode, dynamic spray mode, indirect spray mode
- Micro hole atomization disc: fine mist atomization, large atomization, high atomization, nonwetting tabletop
- Material: 1.2mmFR-4; PCB size: 50 * 25 * 1.2mm; Atmosphere lighting: white light
- Application: DIY self-made, plant moisturizing, product application
AEDIKO 5pcs USB Humidifier Module 5V Atomization Plate Circuit Board Atomization Module USB Spray Module Circuit Board Atomization Module Atomizer for DIY Incubation Experimental Equipment
Main highlights- USB Humidifier Module: Rate Voltage: DC 5V; Rate Current: 300mA; Power Type: Micro USB Socket; Power: 1.5 ~2W; Frequency: 108KHz + 3
- Two Spray Modes: press the switch for the first time is continuous spray mode: LED light is always on, always spray, spray 4 hours after the automatic shutdown protection. Press the switch for the second time is indirect spray mode: LED flashes, spray 10 seconds, stop spraying for 5 seconds, and so on, spray 12 hours after the automatic shutdown protection. Press the switch for the third time to turn off the machine.
- Spray Principle: Piezoelectric ceramics drive metal plate high-frequency oscillation, ultrasonic liquid atomization. Micrometer-fine water molecules atomize water throughmicropores and disperse it into the air. Application: DIY spray, plant humidification, landscaping atomization. The atomizing piece needs to be used together with the circuit board with the same frequency to achieve the ideal spray amount
- Convenient to Install: The white piezoelectric ceramic ring surface is the front spray surface, which is installed upward, All steel sheet surface is the suction surface on the back, installed downwards. The red wire is positive and the black wire is negative
- Application: Ultrasonic Mist Maker is a Humidifier DIY Kit, Which is High-frequency Oscillation, Micrometer Aperture, Large Atomization Amount, Fine Mist Particles, High Spray Rate, Spray Variety, Timed Shutdown.Widely Used for Atomization Equipment such as USB Humidifier, Perfume Atomizer, Aromatherapy Atomizer, etc.
Six Spray Humidifier Module DC5V Atomization Control Board Ultrasonic Atomizer TYPE-C Interface Mist Maker Driver Circuit Board
Main highlights- Six Spray Humidifier Module:Micro hole atomization disc, fine mist atomization, large atomization, high atomization, nonwetting tabletop
- Product name: four spray atomization driving board; Rated voltage: DC 5V; Atomization frequency: 108KHZ ± 2KHZ; Rated current: 300MA; Power: 2.5-3W
- Multi-mode spray: continuous spray mode, dynamic spray mode, indirect spray mode
- Material: 1.2mmFR-4; PCB size: 50 * 25 * 1.2mm; Atmosphere lighting: white light
- Application: DIY self-made, plant moisturizing, product application
Black Friday Sale
Deal ends in
HrsMinSec