10 Best Atmega328 5v 16mhz Atmega328p In The Us - Black Friday 2024
Best Choice1
ACEIRMCfor Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board USB Cable for Arduino (10pcs)
Main highlights- 5.Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
- 4.Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila.
- 3.It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
- 2.It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has everything that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
- 1.Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
naughtystartsBreadboard Basic Kits for Arduino Project Atmega328P-PU Atmega328p with Uno R3 Bootloader, Dip28 Socket,16MHz Crystal, 1M Resistor, 100nF Capacitor, Reset Tactile Switch
Main highlights- Breadboard Basic Kits for Arduino Project
9.7Exceptional
View offer on:
Show more
3
AITRIPAITRIP 2PCS Type-C USB Nano 3.0 ATmega328P CH340 5V 16MHz Compatible with Arduino Nano CH340 USB Driver Nano V3.0 ATmega328
Main highlights- The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces
- The Nano is using the chips ATmega328P and CH340, Replace FT232RL
- The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Support for external 5V~12V DC power supply, Support power supply by 9V battery.
- Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed.
9.6Exceptional
View offer on:
Show more
4
HiLetgoHiLetgo 3pcs Pro Mini Atmega328P 5V/16M Replace ATmega128 Pro Mini Atmega328 328P DC5V 16M for Arduino
Main highlights- Support external power supply 3.8-12V DC
- Support Serial Download, 5V/16M
- Main chip: Atmel Atmega328P-AU
- Fully compatible to Arduino Boards
- 3 Pin headers included
9.4Excellent
View offer on:
Show more
5
AITRIPAITRIP 3pack PRO Mini Atmega328P-AU 5V/16MHz Development Board Microcontroller Bootloadered with Pin Headers for Arduino (3pcs)
Main highlights- Support external power supply 3.8-12V DC
- Support Serial Download, 5V/16M
- Size: 33.8mm x 18mm
- Main chip: Atmel Atmega328P-AU
- 8 analog inputs ports: A0 ~ A7
9.1Excellent
View offer on:
Show more
6
HiLetgoHiLetgo 3pcs Pro Mini Atmega328P 5V/16MHz Development Board Compatible with Arduino pro Mini
Main highlights- Support serial downloading, 100% Compatible to all Pro MIni series shields and sensors.
- Support power supply by external 3.3V~12V DC power and 9V battery power.
- Pinout is identical to Pro Mini.
- Chipset: Brand new Atmel Atmega328P-AU.
- Bootloadered already in the board, easy to get started.
8.8Very Good
View offer on:
Show more
7
ACEIRMC10% OffACEIRMC 3pcs Type-C USB CH340 5V 16MHz for Nano 3.0 ATmega328P Controller Board Compatible for Arduino Nano CH340 USB Driver Nano V3.0 ATmega328 (Type-C)
Main highlights- download the driver of Elegoo Nano V3.0 at: https://bit.ly/2jKlJMO
- The Nano is using the chips ATmega328P and CH340, not FT232 as official compatible for Arduino, so pls. use the driver from above link.
- Package Include : 3 X Nano Board
- Nano's got the breadboard-ability of the compatible for Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
8.6Very Good
View offer on:
Show more
8
PodazzPodazz 3Pcs Nano Atmega328P Module CH340 5V/16M USB-C Microcontroller Board for Arduino Nano V3.0, USB to TTL with USB Cable
Main highlights- Widely used: Use Atmel Atmega328P-AU as MCU, support ISP download; support USB download and power supply. Compatible with Arduino Nano V3.0, fully compatible with Windows, Mac and Linux operating systems.
- Product Use: The Podazz Nano board is based on the CH340/ATmega328 microcontroller and is compact enough to be used on a breadboard. It works the same as the original Nano board and is very affordable for beginners.
- Easy to operate: Podazz Nano can be powered via USB-C connection, including USB-C to USB-C cable and USB-C to USB-A cable, Nano will automatically sense and switch to higher potential power supply, no need for power selection jumper.
- Detailed Specifications: The Podazz Nano has 14 digital I/O pins (6 of which can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB-C power jack, an ICSP port, and a reset button.
- Compatibility: The Podazz Nano has a wide range of features for communicating with PCs or other microcontrollers and is fully compatible with Windows, Mac and Linux operating systems.
8.5Good
View offer on:
Show more
9
jujinglobal2pcs for Pro Mini Atmega328P Development Board 5V 16MHz Replacement for Arduino IDE ATmega128 Atmega328
Main highlights- Supports serial download (5V/16M) and is compatible with all Pro Mini Series shields and sensors.
- Supports auto-reset; 5V regulator.
- Noted: You will need a usb to serial converter chip / board to program this.
- Each board come with 2pcs 12pin straight pin header,1pcs 6pin straight pin header and 1pcs 6pin right angel pin header.
- Atmega328P-AU chip had been pre-installed the bootloader.
8.4Good
View offer on:
Show more
10
BSROBOTICUNO R3 Pro Board ATmega328P-PU with USB Cable for Arduino, Input Voltage 7-12V, 5V/2.5A 2500 mAh Power Supply,16MHZ,8 Digital 1/0 pins Support Onboard LED D13, SRAW 2KB
Main highlights- The development board adopts a Type-C connector for convenient connectivity during usage.
- Newly added battery box interface allows direct connection to specialized lithium batteries.
- Introducing A6 and A7 analog interfaces, enabling the expansion of additional functionalities.
- Integrated with a wide-voltage power supply module, it can deliver 5V/2.5A power output to the development board, catering to the power demands of sensor or actuator integration, ensuring more stable operation for assembled projects.
- Incorporating G, V, and S interfaces, sensors, actuators, servos, and displays can be seamlessly connected without the need for expansion boards, enhancing convenience and usability.
- Equipped with three sets of dedicated module connection interfaces, facilitating straightforward and practical connections with a single cable.
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for atmega328 5v 16mhz atmega328p
