10 Best Arduino Nano 30 Atmega328 Driver In The Us - Black Friday 2024
Best Choice1
![Arduino Nano [A000005]](https://cdn.gusav.com/8221dfa3/loader.svg)
Arduino10% OffArduino Nano [A000005]
Main highlights- Tiny form factor, complete, and breadboard-friendly board based on the ATmega328
- The Arduino Nano is one of the smallest Arduino boards available on the market
- It works with a Mini-B USB cable
- Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
LAFVINNano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)
Main highlights- Works the same as original Nano, runs perfectly on programming software.
- Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
- Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.
- LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
- LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.
9.8Exceptional
View offer on:
Show more
3
HiLetgoHiLetgo 3pcs Nano 3.0 ATmega328P Type-C USB CH340 Controller Board Compatible to Arduino Nano CH340 USB Driver Nano V3.0 ATmega328
Main highlights- Type-C USB download and Power
- Nano 3.0 ATmega328P Type-C USB CH340 Controller Board
- Eight analog inputs ports: A0 ~ A7
- Atmega328P-AU MCU Chipset, bootloaded.
9.7Exceptional
View offer on:
Show more
4
AITRIPAITRIP 2PCS Type-C USB Nano 3.0 ATmega328P CH340 5V 16MHz Compatible with Arduino Nano CH340 USB Driver Nano V3.0 ATmega328
Main highlights- The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces
- The Nano is using the chips ATmega328P and CH340, Replace FT232RL
- The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Support for external 5V~12V DC power supply, Support power supply by 9V battery.
- Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed.
9.6Exceptional
View offer on:
Show more
5
ELEGOOELEGOO Pre-soldered Nano Board CH 340/ATmega+328P with USB Cable Compatible with Arduino
Main highlights- The pre-soldered Nano uses the chips ATmega+328P and CH340, not FT232, please install the driver first
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- Learn Arduino Nano with ease: Our ELEGOO Nano Board is the perfect choice for beginners and experts alike, with tutorials available to help you get started.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
9.5Excellent
View offer on:
Show more
6
BeffkkipMini Nano V3.0 ATmega328P Module Micro Controller Board with USB Cable for Arduino
Main highlights- Usage:1. download arduino IDE, (download address: https://arduino.cc/en/Main/Software; 2. Download the USB chip driver, (download address :https://wch.cn/downloads.php?name=pro&proid=65); 3. Plug in the NANO development board, the driver will be automatically installed; 4. Open the IDE of arduino, select NANO for the board, and COM3 for the serial port, and click Download; 5. It is best to select the routine programme that comes with the arduino, burn it in.
- Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.
- Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- NOTE: If you want it to work on a Mac, please install the diver from this: https://drive.google.com/drive/folders/1phezjJtQW0vav34RoivsAzjF0ugmqjgn?usp=sharing; If you want it to work under Windows 10, You must turn off automatic updates before you install the driver, please install the diver from this: https://drive.google.com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing.
- If you need an older driver, pls get it from GitHub—please read the link that follows immediate. https://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: https://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
- Attention:before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: https://www.wch.cn/product/CH340.html; https://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); https://www.wch.cn/download/CH341SER_MAC_ZIP.html; https://www.wch-ic.com/download/list.asp?id=127 (windows); https://bit.ly/2pMF4in.
9.4Excellent
View offer on:
Show more
7
AITRIPAITRIP for Arduino Nano V3.0, Nano Board CH340/ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 With1 Cable)
Main highlights- Uses the CH340G instead of the FTDI FT232RL IC which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space.
- USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27); The power source is automatically selected to the high voltage source
- The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
- Comes with 3 packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed. You can download CH340 Driver from download link in the product description below. also it has 1 cable
- *It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
9.3Excellent
View offer on:
Show more
8
ELEGOOELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
Main highlights- The Nano is using the chips ATmega+328P and CH340, not FT232 as official Arduino, so pls. use the driver from our site.
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- Learn Arduino Nano with ease: Our ELEGOO Nano Board is the perfect choice for beginners and experts alike, with tutorials available to help you get started.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
9.2Excellent
View offer on:
Show more
9
AYWHPNano V3.0 Board with Cable, AYWHP 5PCS Nano Board ATmega328P, CH340G Chip 5V 16M, Microcontroller Compatible with Arduino Nano (Micro USB Port)
Main highlights- Uses atmega328p-AU as MCU, support ISP download; Support USB download and power supply. Compatible with Arduino Nano, fully compatible with Windows, Mac and Linux operating systems.
- The Nano is using the chips ATmega+328P and CH340, not FT232 as official Arduino. It works just like the original Nano board and is very cost-effective for beginners.
- The Nano board has numerous possibilities for communication with a PC or other microcontrollers and is fully compatible with the operating systems Windows, Mac and Linux. This board is particularly breadboard friendly and the connections are very easy to handle.
- The Nano board has 14 digital I/O pins (6 of which can be used as PWM outputs), 6 analogue inputs, a 16MHz quartz oscillator, a Micro USB power socket, an ICSP port and a reset button.
- The Nano board can be powered via a Micro USB connection; 6-12 V unregulated external power supply or 5 V regulated external power supply. The Nano automatically detects and switches to the power source with higher potential, no power selection jumper is required.
8.9Very Good
View offer on:
Show more
10
DORHEA4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0
Main highlights- This board is using the chips ATmega328P and CH340, not FT232 ,Support ISP download; Support USB download and Power.
- The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality.
- The Nano for arduino can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- More Breadboard Space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other.
- It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system.
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for arduino nano 30 atmega328 driver
