10 Best Anycubic Predator Bed In The Us
Best Choice1
FYSETCFYSETC Anycubi Predator 3D Printing Buildplate Round 380mm/14.9in Diameter Only Spring Steel Sheet Preapplied PEI No Sticker Base Flexible Removable Heated Bed Cover Smooth Surface 3D Printer Parts
Main highlights- The steel plate is made of high quality stainless steel, which has good flatness and durability. Due to its large size, it's normal to have a little shake just holding it. This will fade away when putting on the magentic base. Flexible and removable.
- Size:Diameter 380mm/14.9inch, compatible with Anycubi Predator if it has the sticker base, or other 3D printers with the same size sticker printing bed. (Please measure your build plate,not rely on bulid volume before ordering).
- Only a steel plate sticked with PEI on one side, the side with pei is for printing. The performance may be not good without the soft magentic base to keep the flatness, don't recommand to use it sepeartely. A spare part for the combined kit at our store. This is a CLOSEOUT ITEM.
- Kind Tips: We have sticked the PEI on one side of the steel plate by machine, so you don't need to worry about the bubbles any more. If you receive the package but found the air bubbles or scratches, please don't worry, they are the under the film, PEI will not be affected. Clean the pei surface with alcohol or lightly scour it with wild steel wool with 400 grit to have good adhension.
- After installing, please level the heated bed and please mind the distance between nozzle and surface to avoid scratching the surface. When complete printing, let the steel plate cool dow, easy to remove the prints. If still stuck, just slightly bend the plate to pop the prints off.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
FYSETCFYSETC Anycubi I3 Mega Aluminum Hot Bed Part - 220x220mm PEI Build Surface Support - 6061 Aluminum Hotbed Plate: Ultrabase Platform Glass Plate Replacement Upgrade Heated Bed Thickness 3mm with Screws
Main highlights- 5. Package Content: 1pc 220mm aluminum build plate with 4pcs screws for supporting 220x220 pei or textured build plate. If need the matched heater pad, please go to our shop.
- 4. High Quality: 6061 aluminum alloy, high strength and not easy to deform. Anti-corrosion. High surface flatness, ±0.15mm.
- 3. Well-made: The 3d printer aluminum bed plate has been tapped, drilled, drilled and tapped according to the official drawings, the stepped hole is positioned accurately, the thread is clear and non-slip, and the screw is flat and no protrusion after installation. Centerless grinding and drawing process. The brushed treatment can give the metal surface a non-mirror metallic luster, which has a very strong decorative effect like silk satin.
- 2. FDM 3D printer DIY part: Size: 220x220mm / 8.66x8.66inch, thickness about 3mm / 0.12inch, with precise drilled holes. Easy to install onto the Y carriage holder with screws. Need to work with a silicone 3d printer heater mat. Specailly designed to replace original ultrabase platform Glass bed on ANY CUBIC I3 Mega Pro S machine. Please measure your stock print platform and confirm its shape before ordering to avoid wrong buy.
- 1. Upgrade 3d print bed support: This aluminum hot bed plate is designed to hold 3d printer pei sheet 220 x 220 mm spring steel build plate. CNC precision machining, computer gong precision cutting, precise processing. The cut edges are smooth and the sides are free of fish scales.
9.7Exceptional
View offer on:
Show more
3
ANYCUBICAnycubic PEI Spring Steel Magnetic Platform Replacement, Removable and Compatibility for Anycubic Kobra 2 Neo/Anycubic Kobra Neo/Anycubic Kobra 2/Anycubic Kobra 2 Pro/Anycubic Kobra Go/Anycubic Kobra
Main highlights- 【Perfect Customer Service】If you have any qusetions or needs, please be free to contact us. We would offer you an excellent after-sale service
- 【More Flexible and Easier】Easy to move your printing models as it's flexible. After cooling, the model is loose and can be took off easily
- 【High Temperature Resistance】Withstands max temperature up to 260℃. Tough、durable and reliable replacement part
- 【Great Adhesion】Made by PEI special materials.It also has stronger adhesion to adhere the model
- 【Application】Wider Compatibility for Anycubic Kobra 2 Neo/Anycubic Kobra Neo/Anycubic Kobra 2/Anycubic Kobra 2 Pro/Anycubic Kobra Go/Anycubic Kobra 3D Printer
9.6Exceptional
View offer on:
Show more
4
ANYCUBICAnycubic PEI Spring Steel Magnetic Platform, Compatible with Anycubic Kobra 2、Anycubic Kobra、Anycubic Kobra Go High Strength High Heat Resistance 11.26 x 11.26 x 1.69 Inches
Main highlights- 【Size & Weight】Size 11.26 x 11.26 x 1.69 inches and weight 1.15 Pounds
- 【High Temperature Resistance】PEI material is perfectly applied in the 3d printing. It could withstand high heat of up to 260℃ and numerous printing cirsumstance
- 【High Quality Workmanship】Exquisite workmanship can be well adapted to your printer. The high quality steel won't kink when bending it to remove model
- 【Excellent Customer Service& StrictTest】Each product will accept strict testing and excellent package before delivery. If you have any qusetions or needs, please be free to contact us
- 【Application】Compatible with Anycubic Kobra 2、Anycubic Kobra、Anycubic Kobra Go
9.5Excellent
View offer on:
Show more
5
ANYCUBICAnycubic Double Sided PEI Spring Steel Magnetic Platform Enhanced Adhesion for Anycubic Kobra 2 Neo/Anycubic Kobra Neo/Anycubic Kobra 2/Anycubic Kobra 2 Pro/Anycubic Kobra Go/Kobra 3D Printer
Main highlights- 【Stronger Adhesion & Easy Removal】Strong magnetic force and easy to remove the printing model. lightly bend the printing platform, and the finished miniatures can be quickly taken off
- 【Size & Weight】Size 11.38 x 11.06 x 1.73 inches and weight 1.37 pounds
- 【Excellt Adapatability】The surface made by PEI material is not easy to scratch, which withstand numerous printing circumstance
- 【Excellent Customer Service】Each product will accept strict testing and excellent package before delivery. If you have any qusetions or needs, please be free to contact us
- 【Application】Compatible with Anycubic Kobra 2 Neo、Anycubic Kobra Neo、Anycubic Kobra 2、Anycubic Kobra 2 Pro、Anycubic Kobra Go、Kobra 3D Printer
9.4Excellent
View offer on:
Show more
6
FYSETCFYSETC 3D Printer Anycubi-Vyper Top Build Plate Only: Smooth PEO - Textured PEI Double sided Print Bed Replacement No Magentic Sticker Flexible Spring Steel Sheet 265x250mm/10.43x9.84inch Hotbed Cover
Main highlights- 5. Simple Installation and Use: A drop-in replacement for the stock print platform. Align this flexible plate onto your original magentic base on the non-heated bed. The removable PEI sheet can be magentically bonded to it. Then level the bed with auto leveling sensor. Keep the print surface CLEAN with our hotbed cleaning tool (Asin: B0CKXQVLR2) for better fisrt layer adhesion. Another, store it separately due to its special design for a Longer lifespan.
- 4. Wide Compatibility: The PEI Printing Surface can be compatible with PLA, PETG, TPU, ABS, PA-CF, WOOD and any other filaments. Different filament has a bed temperature setup, our testing result for your reference: PLA: 50-65℃, PETG: 70-80℃, TPU: 60-70, ABS: 90-100℃. For high-temp required filament ABS, we recommend to print on the Textured PEI surface, NOT on the Smooth PEO side.
- 3. Quality security: FYSETC 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magentic hotbed, can resist high strength no deformation. The Smooth PEO surface has a high temperature resistance of 100℃/212℉(Not suitable for ABS) and the Textured PEI side can stand high temperature up to 190°C/374℉. Please note: Not scratch the build plate with the printing nozzle directly to avoid scorching the surface.
- 2. Great First Layer Adhesion: **Do Not sand the PEO bed to avoid permanent damage.**This Double sided build plate is compatible with most 3d printer material, such as PLA, PETG, TPU, ABS, etc. No glue, No tap, An Appropriate Z axis is very important, if too low causing a filament buildup and scratch the print bed. Too high the prints come off the hotbed. Turn OFF the cooling fan and Slow down the speed to 10-25mm/s when going on the first layer. Adding brims and DRY filaments also greatly help.
- 1. A NEW Vyperr Print Bed Surface Top Plate Only: 1PC 265x250mm/10.43x9.84inch Flexible Build Plate, No magentic Sticker. A good spare dual sided hot bed cover for your Vyperr stock magletic platform kit. Smooth PEO+Textured PEI, both sides can be used, more effective. DO NOT use it alone, must match a magletic sticker. A great diy replacement part for same size 250x265 build plate kit (Asin:B0B6347LLG)at our store.
9.3Excellent
View offer on:
Show more
7
eazor220x220mm Ultrabase Platform Glass Plate Build Surface + Aluminum Heated Bed Hotbed 12V with Wire Cable for Anet A8 A6 for ANYCUBIC I3 Mega for Ender 3 /Ender 3 Pro 3D Printer
Main highlights- Ultrabase integrated with heated bed: Super flatness, fast and uniform heating.
- The special coating is inorganic, hardness of 8 Mohs, which makes it be able to work at 400ºC.
- Excellent adhesion, ultrabase covered by microporous coating, shows strong adhesion in printing.
- Easy to take off models by hand or with a little help from the scrapper for very large models.
- Durable to use, easy to clean by alcohol or water.
9.2Excellent
View offer on:
Show more
8
HzdaDeveHzdaDeve PEI Sheet Textured and PEO Plate Smooth 230X230mm Spring Steel Print Bed for Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra Neo/Kobra/Kobra Go/Artillery Genius etc 3D Printer (PEO+Gold PEI)
Main highlights- Special Material: made of Polyethylene which is inherently flame resistant and low in smoke production, high strength and heat resistance.
- Excellent adhesion with one side textured spray PEI and one side diamond smooth surface PEO spring steel plate, it has strong adhesion to adhere the model in a better way. You can use either side.
- Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform.
- Easy for removal: Peel up the top part from the heat bed and bend it to take off models easily as it’s flexible.
- Compatible Printer: This 230X230mm PEO+PEI sheet is compatible with Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra Neo/Kobra/Kobra Go/Artillery Genius/Artillery Genius Pro/Hornet 3D Printer.
9.1Excellent
View offer on:
Show more
9
HysiPruiHysiPrui 3D Printer Double Sided Textured Surface PEI Sheet Adhesive Build Plate, Black Flexible Removable Heated Bed Platform Mat for Anycubic mega i3/ mega S/mega Pro 240x220mm
Main highlights- 【Superior Adhesion】: Printing the mold directly on the frosted textured surface of the PEI build plate without tape or glue saves a lot of time and filaments. Excellent adhesion is achieved when the temperature of the heated bed is about 60°C. You can print directly on each side of a double-sided PEI sheet without the need to use any glue or other tools to help the model stick to the build plate sheet.
- 【Simple Installation And Professional After-sales Service】: Place the double-sided PEI steel plate with positioning holes on the heat bed of the 3D printer and use it. The double-sided textured PEI heated bed platform coating is made by high temperature spraying process. Non-magnetic base. Of course we also provide professional after-sales support. Please contact us (seller) directly through "Ask a question", no matter you have any questions, our customer service will reply you within 24 hours.
- 【Easy To Take Mold】: PEI material offers greater stability, while spring steel sheets offer excellent flexibility and high flatness. The richly textured PEI surface paired with the spring steel sheet ensures hassle-free 3d mold taking. Prints on the double-sided PEI hotbed sticker come off easily when the heated bed temperature drops to room temperature, and if the print is still stuck to the plate, gently bending the build plate removes it. No need to scratch, pry or damage the print!
- 【Double Sided Textured PEI Build Plate Design】: The double sided PEI platform sheet offers wider material compatibility and twice the service life compared to single sided platforms. Double-sided PEI bed mat has a rough surface and can be used on both sides, with texture on both sides. It can be easily adapted to different printing environments and materials. It is reusable, so if one side is accidentally damaged, the other side can continue to be used.
- 【Compatible With The 3D Printers】: This black color double sided PEI heat bed mat measures 240x220mm and is designed to be compatible with Anycubic mega i3/ mega S/ mega Pro and similar sized 3d printers. Also perfectly compatible with PLA, TPU, PETG, ABS and other filament. Please confirm your 3D printer platform size before ordering.
8.9Very Good
View offer on:
Show more
10
ANYCUBIC21% OffANYCUBIC Spring Steel Magnetic Platform for Anycubic Kobra 2 Neo/Anycubic Kobra Neo/Anycubic Kobra 2/Anycubic Kobra 2 Pro/Anycubic Kobra Go/Kobra 3D Printer
Main highlights- Operating system : Linux
- Item dimensions : 8.0 inches
- Item depth width height : 8.0 inches
- Compatible material : Alloy Steel
- Compatible devices : Laptop
8.8Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for anycubic predator bed
