10 Best Anycubic 3d V5 J Head In The Us
Best Choice1
HOCENWAYUpgraded 24V 45W V5 J-Head Volcano Hotend High Flow, 2pcs 300℃ Silicone Socks + 5pcs 0.4mm Nozzles Compatible with ANYCUBIC Vyper/Kobra Max/Kobra Plus 3D Printer Parts (Hot End)
Main highlights- This hotend temperature sensor is using 3mm OD cartridge instead of the glass head to make the connection is more stable, more precise results. And using 45W replacing 40W heater, heats faster and higher temperature.
- This hotend is using volcano hotend style, high flow , high speed printing.
- Package list: 1 set hotend installed with PTFE tube, 24V 45W heater and NTC 100K thermistor; 5pcs brass nozzles 0.4mm as spare parts, and 2pcs silicone covers ( PLEASE NOTE: This silicone sock only can be used under 300C degree which is high temperature type, if your printing temperature is over 300C, please remove it. )
- Compatible with Vyper/Kobra Max/Kobra Plus 3d printer
- Brass nozzles are made from high quality international brass material, have good thermal conductivity and high strength.And Hole is central and round, and Smooth inner wall, reduce to be blocked
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
UniTak3DANYCUBIC Vyper/Kobra Max/Kobra Plus 3D Printer Hotend Replacement Volcano V5 J-Head Quality Brass Nozzle 24V40W Ceramic Heating Cartridge Element Supports High Speed Printing
Main highlights- 【Volcano Hotend Design】: The print head heats evenly because of the special Volcano hotend nozzle design ,filament flows smoothly in throat nozzle ,and it supports high speed printing.
- 【Plug and Play】: Both of the thermistor and heating rod come with connector, no wiring and peeling works.So this V5 J-head hotend will be quite easy to install on ANYCUBIC Vyper 3D printer.
- 【High-accurate Brass Nozzle】: With original high-accurate Anycubic brass nozzle,it can provide smoother printing,thus having better printing result.
- 【Filament Compatibility】: The 24V Volcano hot end works great with 1.75mm PLA/ABS/WOOD/PETG/TPU.
- 【Application】: This hotend replacement is ONLY compatible with ANYCUBIC Vyper/Kobra Max/Kobra Plus 3d printer.It will NOT work with Kobra Neo or Kobra Go.
9.6Exceptional
View offer on:
Show more
3
REDREX[Original]Anycubic I3 Mega V5 J-head Hotend 3D Printer Extruder Print Head
Main highlights- Quality Brass Nozzle:0.4mm
- Pre-assembled Hotend Kits:Equipped with 12V 40W cartridge heater and NTC3950 thermistors ；Heat resistant with aluminum heating block, the temperature can reach up to 250℃;
- Filament Compatibility: 1.75mm PLA/ABS/WOOD/PETG/TPU;
- Easy to Install:Both of the thermistor and heating rod come with connector,very easy to install；
- Compatible with I3 Mega, I3 Mega X, Mega S 3D printer;
9.3Excellent
View offer on:
Show more
4
HIKUDIYHIKUDIY V5 J-Head Hotend Kit for Anycubic Vyper/Kobra Plus/Kobra Max, 3D Printer Parts Replacement Print Head Kit with 5PCS Silicone Socks and 5PCS 0.4mm Brass Nozzles
Main highlights- Silicone Socks: This hot end kit contains 5 extra silicone socks, which can be well wrapped around the heating block to avoid accidental hand contact with the heating block and also to keep the nozzle and heating block clean
- Plug and Play: This hot end kit comes pre-assembled with a heating tube, thermistor, nozzle and silicone sock, no wiring and peeling works, making it an easy replacement for the printer's previous hot end kit and use
- Filament Compatibility: The 24V hot end works great with 1.75mm PLA/ABS/WOOD/PETG/TPU filament, etc
- Compatible with: Our 3D printer hotend kit is compatible with Anycubic Vyper/Kobra Max/Kobra Plus 3D printer, extra comes with 5PCS Silicone Socks and 5PCS 0.4mm Nozzles for replacement
- Brass Nozzles Kit: This hot end kit includes 5 extra 0.4mm brass nozzles, which are crafted from durable brass materials, this printing head guarantees consistent performance and reliability throughout extensive printing sessions
9.2Excellent
View offer on:
Show more
5
SAPLUSREPRAP11% OffAssembled I3 Mega V5 Upgrade J-Head Hotend 12V40W and 3X 0.4mm Nozzle, 2X Silicone Sock, 1x Heatblock Compatible with 3D Printer ANYCUBIC I3 MEGA, I3 MEGA X, Mega S, Mega Pro 1.7 mm Filament Extruder
Main highlights- Tips: 1. Before installed, please check parts whether loose in transit. 2. It is suggested to re-level your hot bed after installing this print head
- Package: 1 Set assembled I3 Mega hotend V5 J-head hotend (Contained: PTFE tube, heater, NTC 100K thermistor, throat, pneumatic connector, brass nozzle, mega V5 radiating pipe and heater block), 3 x V6 nozzles, 2 x V5 silicone socks, 1 x V5 heater block
- Easy to Use, More Compatibility: The heater wire and thermistor wire come with suitable connetors, simply remove old J-head hotend and replace with the new J-head, plug wires to the electronic board, then ready to print
- Compatible with Anycubic Mega Series: This V5 J-head hotend is perfectly compatible with ANYCUBIC I3 MEGA, I3 MEGA X, Mega S, Mega Pro 3D Printer
- Assembled Mega Pro Hotend: Teflon tube, 12V heater and NTC100K thermistor are pre-assembled in hotend. Teflon tube goes through pneumatic joint and down to the nozzle, thus the feeding is smooth and clogging is reduced. Working temperature up to 250℃
9.1Excellent
View offer on:
Show more
6
HICTOPHICTOP Hotend Compatible with Anycubic Kobra 2, Kobra 2 Plus, Kobra 2 Max, Kobra 2 Pro, Kobra 2 Neo 3D Printers 24V V5 J-Head Anycubic Kobra 2 hotend
Main highlights- 5.Both of the thermistor and the heater carriage come with connectors, plug and play
- 4.Nozzle diameter of the Anycubic Kobra 2 hotend: 0.4mm, you can change it to other sizes you like
- 3.Anycubic Kobra 2 hotend type: V5 J-Head
- 2.The Anycubic Kobra 2 hotend is full assembled with 24V Ceramic cartridge heater, NTC3950 thermistor and aluminum heating block, the temperature can reach up to 500 °F / 260 °C
- 1.The HICTOP hotend is compatible with Anycubic Kobra 2, Kobra 2 Plus, Kobra 2 Max, Kobra 2 Pro, Kobra 2 Neo 3D Printers but NOT with Kobra, Kobra Go, Kobra Neo or Kobra Max
9.0Excellent
View offer on:
Show more
7
TIEXYEUpgrade I3 Mega Extruder Print Head, V5 J-Head i3 Mega Hotend 12V 40W Compatible for ANYCUBIC I3 Mega Hotend, I3 Mega X Hotend, Mega S Hotend, Mega Pro Hotend 3D Printer,
Main highlights- This V5 J-head MEGA Hot end Compatible with ANYCUBIC I3 MEGA, I3 MEGA X, Mega S, Mega Pro, Mega Series 3D Printer Extruder Print Head. .
- The V5 J-Head Hotend I3 Mega S Hotend Cover is made of high temperature resistance silicone material. High temperature resistance up to 280℃.
- Package Includes: I3 Mega Pro Hotend V5 J-head Hotend 1 Set (Contained: 0.4mm Brass Nozzle, Aluminum V5 Heater Block, PTFE Tube, 12V 40W Heater, NTC 100K Thermistor, Bore 4.1mm Throat, V6 PC4-01 Pneumatic Connector, Mega V5 Radiating Pipe and V5 Heatblock Silicone Socks.)
- Mega V5 J-Head Hotend, 12V 40W Cartridge Heater and NTC3950 Thermistor；Heat Resistant with Aluminum V5 Heating Block, Working temperature up to 250℃, Suitable for Printing 1.75mm Filaments such as: PLA, ABS, PETG, TPU, etc.
- Easy to Use, The heater wire and thermistor wire come with suitable connetors, More Compatibility. Before installed, please check parts whether loose in transit.
8.8Very Good
View offer on:
Show more
8
SeekLinySeekLiny V5 J-Head i3 Mega Hotend 12V 40W with 2pcs Hardened Steel 0.4mm V6 Nozzles for Anycubic i3 Mega S X Series 3D Printer Extruder Hotend
Main highlights- Use hardened steel V6 nozzle on mega hotend for high temperature printing with special filaments 1.75mm.
- This v5 jhead i3 mega hotend is compatible with Anycubic i3 Mega S, Mega X Series 3D Printer.
- Please tighten the mega hotend again before use.
- Find more 3D printer hotends for Anycubic 3D printers from Seekliny. Contact seekliny if you have installation problem with our Mega Hotend 12V.
- Box contents: 1x V5 J-Head Mega Hotend 12V
8.6Very Good
View offer on:
Show more
9
SeekLinySeekliny Vyper Hotend, Kobra Max Hotend, Kobra Plus Hotend, Volcano Hotend, V5 J-Head with Extra Volcano Nozzles Compatible with Anycubic Vyper/Kobra Max/Kobra Plus 3D Printer Hotend Replacement
Main highlights- This Volcano hotend is compatible with Anycubic Vyper/Kobra Max/Kobra Plus 3D Printer.
- Please tighten the Vyper/Kobra Max/Kobra Plu Hotend again before use.
- Find more 3D printer extruder head hotend for Anycubic 3D printers from Seekliny.
- Contact Seekliny if you have installation problem with our Vyper/Kobra Max/Kobra Plus Volcano Hotend 24V 40W.
- Box contents: 1x Vyper/Kobra Max/Kobra Plus Volcano Hotend Assembled 24V 40W, 1x Brass Volcano Nozzle 0.4mm, 1x Hardened Steel Volcano Nozzle 0.4mm
8.4Good
View offer on:
Show more
10
SAPLUSREPRAP10% OffCompatible-with ANYCUBIC Vyper/Kobra Hotend - Kobra Max/Plus Hot end Upgrade V5 J-Head Hotend 24V 40W 3D Printer Replacement
Main highlights- Tips: 1. Before installed, please check parts whether loose in transit. 2. It is suggested to re-level your hot bed after installing this print head
- This Vyper V5 J-head Hotend 24V 40W replacement is ONLY compatible with ANYCUBIC Vyper Parts and Kobra Max/Plus 3d printer. It will NOT work with Kobra Neo or Kobra Go
- Package Includes: 1 Set Compatible with ANYCUBIC Vyper Hotend V5 J-head hotend upgrade 24V 40W (Contained: PTFE tube, Volcano Heater Cartridge 24V, NTC 100K thermistor, 5x 0.4mm Volcano Nozzle, 2 x V5 Heatblock Silicone Socks )
- Notes: the silicone sock only work under 280℃ degree. Please remove the silicone sock first if your printing temperature is over this temperature
- Easy to Use, More Compatibility: This Vyper V5 J-head hotend will be quite easy to install on ANYCUBIC Viper Kobra Max/Plus Hotend 3D printer
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for anycubic 3d v5 j head
