10 Best Air Compressor Filter Regulator Water Trap In The Us - Black Friday 2024
3/4" NPT HIGH FLOW AIR PRESSURE REGULATOR & PARTICULATE FILTER WATER TRAP COMBO FOR COMPRESSED AIR COMPRESSORS
Main highlights- 3/4" NPT, FILTER & REGULATOR COMBINATION WITH GAUGE & MANUAL PUSH DRAIN
- 225 PSI MAX INPUT PRESSURE, REGULATES PRESSURE FROM 7 - 215 PSI
- 160 CFM FLOW RATE 5 MICRON FILTER ELEMENT INCLUDED
- 11oz METAL BOWL AND VISIBLE SIGHT GLASS, COMES COMPLETE WITH METAL WALL MOUNT/BRACKET
- Curious about how we select the top products for you? Explore How It Works
FEENIX Pro Products 22091 Air Filter Regulator & Lubricator Combo 1/2 inch NPT, 5 Micron Element, Poly Bowl - Compressor Air Filter Air Pressure Regulator Water-Oil Separator Trap Filter, Black/Gray
Main highlights- NOTE: WARNING – Proper installation is crucial. Always install the filter, regulator, and lubricator with airflow following the arrows on the product. Incorrect installation can result in malfunction of your compressor regulator, compressor air filter.
- With a 105 SCFM flow rate, this unit seamlessly integrates with your air compressor dryer, air compressor filter dryer, and air compressor moisture filter to ensure consistent air quality. It’s also compatible with a pressure regulator for air compressor, air compressor regulator with gauge, and air compressor water filter for maximum system performance.
- Includes a large 2" pressure gauge and 2.7 ounce poly bowl with a quick release bowl guard, acting as an air compressor water separator, water separator for air compressor, air water separator for air compressor, and oil water separator for air compressors. This effectively removes moisture and contaminants from your air system.
- Designed to optimise air systems, it functions in conjunction with an air dryer for compressor, air compressor dryer system, air compressor water trap, water trap for air compressor, and air compressor air filter. This helps maintain a dry, efficient, and reliable compressed air setup.
- 215 PSI max input pressure and 150 PSI max output pressure ensure reliable performance, making it ideal as an air compressor regulator, air regulator, and air pressure regulator 1/2 NPT. Equipped with a 5 Micron standard filter element, it also functions as a dependable air compressor filter and compressed air filter for clean, regulated airflow.
NANPU 3/8" NPT Compressed Air Filter Regulator Lubricator Combo Water/Oil Trap Separator - Gauge(0-150 psi), Poly Bowl, Semi-Auto Drain, Bracket - 3 in 1 Two Unit
Main highlights- Operating Pressure: 0-125 PSI
- Includes Semi-Auto Drain & Polycarbonate Bowl with Metal Guard, 0-150 Gauge & Bracket,a pair of Air Coupler& Plug Kit, 2 x 3/8" NPT Fittings, 1 x Thread Seal Tape
- Flow Rate: 60 SCFM (1700 L /Minute)@ 90 psi
- 5 Micron Brass Filter Element, Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
- 3/8" NPT Piggyback Filter Regulator Lubricator Unit
NANPU 1/4" NPT Compressed Air Filter Regulator Lubricator Combo, Water/Oil Trap Separator - Gauge(0-150 psi), Poly Bowl, Semi-Auto Drain, Bracket
Main highlights- Operating Pressure: 0-125 PSI
- Includes Semi-Auto Drain & Polycarbonate Bowl , 0-150 Gauge & Bracket,a pair of Metal Air Coupler& Plug Kit, 2 x 1/4" NPT Fittings, 1 x Thread Seal Tape
- Flow Rate: 18 SCFM (500 L /Minute)@90 psi
- 5 Micron Brass Filter Element, Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
- 1/4" NPT Piggyback Filter Regulator Lubricator Unit
Moisture Trap Air Filter, 1/2 Inch Air Filter Compressor Water Moisture Trap Separator Regulator Accessories, Air-Compressor Accessories Parts
Main highlights- The . working pressure is 1.0MPa / 145PS and . working temperature is 60 °C / 140℉
- Made of high quality PC and Aluminum Alloy material, durable and sturdy, safe and eco-friendly to use
- Internal baffle spins air for water removal and easy bowl removal and replacement
- Easy installation, suitable for various installation environments. A cost effective, looking solution to your filtration needs
- 1/2" size inlet and outlet port and 5μm filtering accuracy. The rated rate is 4000L / Min
Hromee 1/2 Inch Compressed Filter Regulator Combo, Air Compressor Water Oil Trap Separator with Pressure Gauge, Semi-Auto Drain and Bracket
Main highlights- SEMI-AUTO DRAIN - The air filter regulator is equipped with a semi-auto drain that means it will drain accumulated liquids automatically when there is no pressure. Take care of the MAX drain level on the bowl and always keep the liquids below the line.
- PRESSURE GAUGE&BRACKET - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two units of measurement: psi and bar. The Max pressure is 150 PSI. The bracket is designed to provide a secure way to mount a filter regulator and easy removal.
- METAL COVER- The metal cover is designed the style of hollow-carved not full covered that not only protective the cup but also make you can see the inside of the bowl through the side. 2×1/4” double male fittings can transfer the female fittings in the filter into the male fitting to connect. Please use teflon tape to ensure tight connect before using.
- BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic equipment. The 5 micron brass filter element provide higher efficient filtration and long lifetime than the fiber one.
- AIR REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob to set the desired pressure. No matter how the inlet pressure and flow fluctuations are, it always can maintain a stable outlet pressure.
SNS 1/4" NPT Compressed Air Filter Regulator Lubricator Two Units Combo FRL Water/Oil Trap Separator, Semi-auto Drain, Gauge and Bracket, Poly Bowl with Metal Guard AC3010-N02A
Main highlights- Rated Flow: 60 SCFM(1700 L/min) under the pressure of 102 PSI (0.7MPa)
- Range of regulation: 7~120 psi (0.05~0.85 MPa). Temperature Range: 41-140 ℉ (5~60 ℃)
- It’s easy to operate and has good performance in air source treatment.
- Includes semi-auto drain and Poly-carbonate bowl with metal guard cover
- AC3010~AC5010 have metal protective bowl cover
- 1/4" NPT Compressed air filter regulator lubricator two units combo with pressure gauge and bracket
RIH pneumatics 1/4“ NPT Compressed Air Filter Regulator Lubricator Combo Water/Oil Trap Separator - Gauge(0-150 psi), Auto Drain and Manuall-drain,Poly Bowl,Bracket - 3 in 1 Two Unit
Main highlights- 【Working Temperature】32~140°F【Flow Rate】18 SCFM (500 L /Minute)@90 psi
- 【Size】Air Filter Pressure Regulator thread Size:1/4" NPT【Operating Pressure】0-145PSI(0.15-0.85Mpa)
- 【Product Packaging】Includes Auto Drain & Polycarbonate Bowl, 0-150 Gauge & Bracket,a pair of Air Coupler& Plug Kit, 2 x 1" NPT Fittings, 1 x Thread Seal Tape
- 【Product Name】 Air Filter Regulator Lubricator Combo Water/Oil Trap Separator(1/4“ NPT Auto-Drain)
- 【Features】To lower or maintain air pressure; Filter moisture and fine particles from the air. 5 Micron Brass Filter Element, Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
1/2" Particulate filter water trap seperator moisture Compressed Air Compressor
Main highlights- THIS UNIT HAS 5oz POLYCARBONATE BOWL WITH METAL BOWL GUARD. 5u MICRON FILTER REMOVES 95% OF MOISTURE AND DEBRIS.
- REPLACEMENT FILTERS CAN BE FOUND ON AMAZON. ASIN B01MTC8AAH. COPY PASTE ASIN TO YOUR AMAZON SEARCH BAR.
- COMES WITH A SEMI AUTOMATIC DRAIN THAT ACTS LIKE AN OVERNIGHT DRAIN. WHEN PRESSURE IS APPLIED TO THE BOWL, THE DRAIN WILL HOLD THE MOISTURE CONTENTS UNLESS YOU MANUALLY DISCHARGE IT. WHEN NO PRESSURE IS APPLIED TO THE BOWL, THE DRAIN AUTOMATICALLY OPENS TO RELEASE THE MOISTURE.
- 175 PSI MAX INPUT PRESSURE, 145 MAX OUTPUT PRESSURE, 106 CFM FLOW RATE. PLEASE NOTE::: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES::::
- 1/2" NPT PARTICULATE FILTER / WATER TRAP TO REMOVE MOISTURE FROM COMPRESSED AIR LINES.
1/4 Inch Air Adjusting Regulator Valve with Pressure Gauge and Water Trap Filter, 2 Packs, Oil Separator Water Pressure Regulator Air Compressor Regulator for Air Spray Paint Gun Air Pressure Cleaner
Main highlights- Wide applications: the air adjusting regulator valve is suitable for most spray tools and airlines, such as spray paint gun, air pressure cleaner, airline dryer and so on, which can be applied as a compact filter for air spray guns
- Small integration: you will receive 3 packs of air adjusting regulator valves, each including 3 parts, which are black part for air pressure regulators, blue part for water filter and the last part for stainless steel adapter
- Separating impurities: the transparent filter bowl allows a visual inspection of cumulative water and can filter airborne solid residues through a spring loaded valve at the bottom, such as pipe scale, rust, condensation from airlines
- Safe and practical: with pressure regulator, you can see the working tool pressure clearly; The sealing tape can be applied on thread part for nice prevention of air leakage; Cleaning air passing through the pneumatic tools can extend the tool life span to some extent
- Keep paintwork clean: air inlet measuring 1/4 inch and the overall length of 5.9 inch, the air compressor water separator kits fit into the paint gun and air compressor to prevent water, oil and impurities from polluting your painting work
Black Friday Sale
Deal ends in
HrsMinSec