Our 10 Best 90 Worm Gear Box - Black Friday 2024

Worm Gear Gearbox NMRV-030 Speed Reducer Ratio 80:1 for Stepper Motor

9.8

Exceptional

View offer on:

PGFUN 1:1 Right Angle Tapered Bevel Gearbox Mini 1 Module 20 Teeth 90° Angle Drive Steering Gear Device Simple Mechanical DIY Module with 8mm Shaft

                                    Main highlights
                                    Specification: built-in 1 module 20 teeth bevel gears, 8 mm/ 0.3" shaft, max torque rating: 5 N.M/ 3.6 ft.lbs , max rotation speed: 1500 rpm, backlash: 5 degree, if 3D file(stp) is needed, free to contact us.
Note: it's simple steering gear, not recommended for high torque and high accuracy CNC application.
Motor drive can be realized with coupling and belt pulley gear.
Material: Aluminum alloy with sandblasting oxidation & Stainless Steel Shaft, Overall Size: 56.2 x 30 x 56.2 mm/ 2.2 x 1.2 x 2.2 inch.
1:1 L-shaped Right Angle Bevel Gearbox for Simple DIY Mechanical Application, 1 Input Shaft Drives 1 Short Output Shaft.

                                

9.7

Exceptional

View offer on:

PGFUN 5:1 Right Angle Worm Gearbox 90° Angle Drive Steering Gear Reducer 20T Reduction Gearbox Simple Mechanical DIY Module with 8 mm Shaft

                                    Main highlights
                                    Specification: 20 teeth, 8mm shaft, 1 input shaft drive 1 right angle steering output shaft.
Note: it's simple steering gear, can not used for high troque and high rotating speed CNC application.
Motor drive can be realized with coupling and belt pulley gear.
Material: Aluminum alloy & #45 Steel, Overall Size: 82 x 82 x 50 mm/ 3.23 x 3.23 x 1.97 inch.
5:1 Right Angle Worm Gearbox for Simple DIY Mechanical Application, the Gearbox Reducer Comes without Self-locking Function Due to Small Reduction Ratio.

                                

9.6

Exceptional

View offer on:

PGFUN 10:1 Right Angle Worm Gearbox 90° Angle Drive Steering Gear Device 20T Reduction Gearbox Simple Mechanical DIY Module with 8mm Shaft

                                    Main highlights
                                    Specification: 20 teeth, 8mm shaft, 1 input shaft drive 1 right angle steering output shafts.
Note: it's simple steering gear, can not used for high torque and high rotating speed CNC application.
Motor drive can be realized with coupling and belt pulley gear.
Material: Aluminum alloy & #45 Steel & Copper gear, Overall Size: 82 x 82 x 50 mm.
10:1 Right Angle Worm Gearbox for Simple DIY Mechanical Application.

                                

9.5

Excellent

View offer on:

LUNYEE NMRV30 Worm Gear Reduction Box Speed Ratio 20:1 Worm Gearbox Speed Reducer Worm Gear Motor Square Type for Nema23 Stepper Motor Servo Motor

                                    Main highlights
                                    Worm Gearbox Reducer - Input Shaft: Φ11mm, Output Bore Diameter: Φ14mm, Ratio:20:1.
Widely Use - Our NMRV30 gearbox can expand the application possibilities for Nema 23 stepper motors by significantly increasing their torque output in a compact and efficient way.
Right-angle Output: The output shaft exits at a 90-degree angle from the input, ideal for CNC machines, 3D printers, robotics, and industrial automation applications that require increased torque for precise movements.
Product Model - NMRV030, square type input flange,matched with Nema23, stepper motor and servo motor.
Durable & Low Noise - High-quality aluminum alloy enclosure, high torque, strong load-bearing capacity, stable transmission and low vibration, thermal performance.

                                

9.4

Excellent

View offer on:

PGFUN 1:1 Right Angle Bevel Gearbox 1 Module 20 Teeth 90° Angle Drive Steering Gear Device Simple Mechanical DIY Module with 8mm Shaft

                                    Main highlights
                                    Update: 1. added 2x M4 fixing holes at the side; 2. updated right angle mounting bracket for vertical fixing; 3. updated handwheel/ crank handle for easy manual driving.
Specification: 1 module, 20 teeth, bevel gear with 2 x M4 screw holes, 8mm shaft. Material: Aluminum alloy & #45 Steel, Overall Size: 100 x 75 x 25 mm.
Note: it's simple steering gear, can not used for high troque and high rotating speed CNC application.
Motor drive can be realized with coupling and belt pulley gear.
1:1 Right Angle Bevel Gearbox for Simple DIY Mechanical Application.

                                

9.1

Excellent

View offer on:

PGFUN 1:1 Right Angle Tapered Bevel Gearbox 1.5 Module 20 Teeth 90° Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft

                                    Main highlights
                                    Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6" shaft, max torque rating: 5 N.M/ 3.6 ft.lbs , max rotation speed: 1000 rpm
Note: it's simple steering gear, can not used for high torque and high accuracy CNC application.
Motor drive can be realized with coupling and belt pulley gear.
Material: Aluminum alloy & #45 Steel with galvanization process, Overall Size: 86.8 x 48 x 73 mm/ 3.4 x 1.9 x 2.9 inch.
1:1 Right Angle Bevel Gearbox for Simple DIY Mechanical Application.

                                

8.9

Very Good

View offer on:

CNCTOPBAOS NMRV030 Worm Gear Reducer Speed Ratio 10:1 RV30 NMRV-030 Worm Gearbox Speed Reducer Square Type for Nema23 Stepper Motor/Servo Motor NMRV30 Output Bore/Hole 14mm Shaft

                                    Main highlights
                                    Speed Ratio: 10:1
Model: NMRV030-10
Input Flange Model: Nema23 ; Application: Matched with Nema23 Servo Motor/Nema24 Stepper Motor; The distance between the motor installation holes is 50mm, not 47mm size
Input Bore Size: 11mm, 0.43" ; Output Bore Size:14mm, 0.55"
Advantage: Smooth transmission, low noise; The multi-faceted installation;High-quality aluminum alloy enclosure, thermal performance, large carrying capacity

                                

8.7

Very Good

View offer on:

Worm Gear Reduction Gearbox, 20T Gear 90 Degree Right Angle Corner Device (8-8MM Shaft, Reduction Ratio 1:10)

                                    Main highlights
                                    Worm Gear Reduction Gearbox 20T Gear 90 Degree Right Angle Corner Device
The punching and cutting process of aluminum alloy processing may produce scratches
Manual measurement, there will be slight errors
It is a simple reducer and cannot be used for high-speed operation (used in places where accuracy is not high)
As shown in the figure, the product has no fixed mounting holes and no cover on the top and bottom

                                

8.5

Good

View offer on:

iDili Turbine Worm Gear Transmission Right Angle Reverse Box 1:5 Gearbox 90-Degree Angle Reducer 8MM Corner Device No Self-Locking

                                    Main highlights
                                    Worm specification: outer diameter 18mm, length 32mm
Turbine worm material: 304 stainless steel
Turbine gear specification: 20 teeth, outer diameter 22mm, tooth width 10mm; Step outer diameter 17mm, step thickness 8mm, hole diameter 8mm
Reduction ratio 1:5 (worm input shaft rotates 5 turns. Turbine gear output 1 turn)
Frame material: aluminum alloy

                                

8.4

Good

View offer on:

10 Best 90 Worm Gear Box In The Us - Black Friday 2024

1

Worm Gear Gearbox NMRV-030 Speed Reducer Ratio 80:1 for Stepper Motor

2

PGFUN 1:1 Right Angle Tapered Bevel Gearbox Mini 1 Module 20 Teeth 90° Angle Drive Steering Gear Device Simple Mechanical DIY Module with 8mm Shaft

3

PGFUN 5:1 Right Angle Worm Gearbox 90° Angle Drive Steering Gear Reducer 20T Reduction Gearbox Simple Mechanical DIY Module with 8 mm Shaft

4

PGFUN 10:1 Right Angle Worm Gearbox 90° Angle Drive Steering Gear Device 20T Reduction Gearbox Simple Mechanical DIY Module with 8mm Shaft

5

LUNYEE NMRV30 Worm Gear Reduction Box Speed Ratio 20:1 Worm Gearbox Speed Reducer Worm Gear Motor Square Type for Nema23 Stepper Motor Servo Motor

6

PGFUN 1:1 Right Angle Bevel Gearbox 1 Module 20 Teeth 90° Angle Drive Steering Gear Device Simple Mechanical DIY Module with 8mm Shaft

7

PGFUN 1:1 Right Angle Tapered Bevel Gearbox 1.5 Module 20 Teeth 90° Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft

8

CNCTOPBAOS NMRV030 Worm Gear Reducer Speed Ratio 10:1 RV30 NMRV-030 Worm Gearbox Speed Reducer Square Type for Nema23 Stepper Motor/Servo Motor NMRV30 Output Bore/Hole 14mm Shaft

9

Worm Gear Reduction Gearbox, 20T Gear 90 Degree Right Angle Corner Device (8-8MM Shaft, Reduction Ratio 1:10)

10

iDili Turbine Worm Gear Transmission Right Angle Reverse Box 1:5 Gearbox 90-Degree Angle Reducer 8MM Corner Device No Self-Locking

Black Friday Sale

Related deals you might like for 90 worm gear box

Worm Gear 88 Piece Loaded Tackle Box

$14.49

Worm Gear 88 Piece Loaded Tackle Box

$21.95

BRINGSMART 12V 16rpm DC Worm Gear Motor 70kg.cm High Torque Turbine Electric Gearbox Motor Self-locking Reversed Mini Engine Geared Motor for DIY Robot Door Lock Curtain Machine (12V 16rpm)

$26.22

PGFUN 1:1 Right Angle Tapered Bevel Gearbox 1.5 Module 20 Teeth 90° Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft

$69.99

uxcell Gear Box 90 Degree Right Angle Bevel Gearbox 1:1 Reversing Double Output Shaft 1 Module 20 Teeth Bevel Gear Aluminum Frame Simple Mechanical DIY Module with 8mm Shaft

$37.99

uxcell Gear Box 90 Degree Right Angle Bevel Gearbox 1:1 Single Output Shaft 1 Module 20 Teeth Bevel Gear Aluminum Frame Simple Mechanical DIY Module with 6mm Shaft

$36.99

Mechanical Steering 1pcs 1:20 Right Angle Worm Gear Reducer Small Gearbox 90 Degree Reversing Gearbox Steering Commutator 6mm 8mm Shaft Direction Transmission(8mm)

$50.91

Worm Mechanical NRV030-VS Worm Reducer, 5:1-80:1 Double Extension Shaft 9mm 90 Degree, Worm Gearbox Speed Reducer Gearbox Stepper (Size : Ratio 30 to 1)

$103.84

PGFUN 1:1 Right Angle Gearbox for Nema 17 Stepper Motor 90 Degree Transmission Gearbox with Spiral Bevel Gear

$69.99

LeTkingok 90 Degree Right Angle Bevel Gear Angle Commutator, Forward/Reverse Reversing Gear Box 1:1 S45C Carbon Steel Teeth 6/8MM Shaft (6MM Shaft)

$37.99

Sign up and get exclusive special deals