10 Best 80a Car Esc In The Us - Black Friday 2024
Best Choice1
GLOBACTGLOBACT AM32 80A Crawler ESC and 3542 Brushless Motor Kit for 1/8 1/10 RC Crawler Car Axial SCX10 TRX-4 TRX-6 (2250KV 3542)
Main highlights- 【Note】At low speed, the ESC and motor will heat up due to excessive current. We have improved and upgraded it. The wire can withstand high temperature of 200 degrees. Copper is used at the connection of the heat sink to speed up the heat dissipation.
- 【Fits】Brushless motor ESC kit suit for Axial SCX10 TRX4 TRX6 Redcat RC4WD 1/10 RC crawlers car.
- 【Brushless Motor】CNC machined 6061 T6 material. High-purity copper windings maximize efficiency. Smaller overall size.
- 【Brushless ESC】ESC comes pre-installed with AM32 custom firmware. You can optimize the crawler car to run more smoothly and quietly, Input voltage 2-6S, Output 5.2/6.0/7.4/8.2V four-group voltage BEC can be adjusted by DIP switch, the maximum current is 10A, suitable for high torque service application
- 【Advantage】Globact brushless ESC motor kit not only has excellent low-speed linearity, but also has strong explosive power. It can not only meet the vehicle's low-speed climbing, but also meet the needs of violent starting, head-turning, and straight-line high speed.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
RHINOESCRhinoESC AM32 Crawler ESC 80A Power System 2-8S BEC 5.20-8.2V Adjustable for 1/8 1/10 Scale Cars Crawler Car Axial SCX10 Traxxas TRX-4 TRX-6 (Crawler AM32 80A ESC)
Main highlights- Waterproof & user-friendly e-Switch for easy usage, connect with USB Type-C cable connect Crawler ESC to computer for configuration or upgrade firmware.
- Sinewave startup allows the motor smoothly at ultra-low speeds variable drive frequency Low voltage and makes your car run super smooth and quiet for superior performance.
- It's optimized for crawler and makes your car run super smooth and quiet, but it is also suitable for a variety of 1/8 scale or smaller cars.
- High performance RhinoEsc Crawler ESC for Crawler Cars AM32 custom firmware.
- A built-in adjustable four voltage BEC with a maximum current 10A,to apply the high torque servo,output 5.2~8.2V adjustable by DIP switch.
9.7Exceptional
View offer on:
Show more
3
RCElectricParts.com80A RC Electric Speed Controller ESC for Brushless Motors 5.5v 4A UBEC with XT60 & 3.5mm Bullet Plugs
Main highlights- Programmable - Programming card or using Transmitter
- Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
- LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
- Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
- 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
9.4Excellent
View offer on:
Show more
4
GoolRCGoolRC 80A Brushless ESC Waterproof Electric Speed Controller for 1/10 RC Truck Off-Road Car
Main highlights- Waterproof and dustproof, perfectly fit for 1/10 RC car.
- Strong resistant current capability and excellent heat dissipation, Easily programmed and compatible with pocket-sized program card.
- Protection function includes low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
- High-frequency drive system and Low-resistance field effect tube enhances load capacity and improve the utilization rate of power source.
- High current capability of 80A continuous current and 480A burst current ensures a stable driving.
9.2Excellent
View offer on:
Show more
5
ReadytoskyReadytosky RC 80A Brushless ESC 2-4S Waterproof Electric Speed Controller for 1/8 RC Car Truck
Main highlights- ★★★Suggest to use our Program Card,ASIN : B08FCF8JHV.
- ★It features enhanced throttle response, excellent acceleration, strong breaks and throttle linearity.
- ★High current resistance, excellent heat dissipation.
- ★Continue current: 80A,for 1/8 RC Car Trucks.
- ★Built with the highest quality components to ensure high efficiency operation.
9.0Excellent
View offer on:
Show more
6
FLYCOLORFlycolor 80A ESC 3-6S Electric Speed Controller 5v/6v/7.4v 5A BEC with XT60 & 3.5mm Bullet Plugs for RC Drone Airplane Brushless Motors
Main highlights- Users can set functions according their needs, cycle programming menu which easy to operate .
- Start mode can be set, throttle response is fast and speed control is linear smooth.strong anti-interference.
- Multiple protection features: Abnormal startup protection, over-heat protection, throttle signal loss protection, low-voltage cut-off protection etc.Low-voltage protection threshold value can be set.
- High power safety performance: wherever the throttle lever is, the motor will not start immediately.Judge the working condition via alarm.
- Function： Using C8051F850 MCU, pipelined 8-bit C8051 core . FlyDragon Lite series, unique circuit design, Built-in 5V/6V/7.4V, 5A adjustable BEC, it can be selected by switch according requirement (Default 5V. Make sure BEC voltage is correct before connection.).
8.7Very Good
View offer on:
Show more
7
KingValKingVal Replacement 3660 4200KV Waterproof Brushless Motor Shaft 3.175mm with 80A Brushless ESC Compatible with 1/10 RC Car
Main highlights- Universal fit, fits all 1/10th brushless cars-multi-mounting system for M3 screws
- Stator - Super Thin (0.35mm) Laminations, Removable/Replaceable Rotor,Precision Engineered for Maximum Energy Conversion
- Precision balanced rotor,smoothness for best reliability and maximum RPM
- High Purity Copper Windings Maximizes Efficiency, High RPM ABEC5 Oversized Bearings
- 4 Pole 6 Slot Hi-torque Motor Design, CNC Machined 6061 T6 Billet Aluminum Heatsink Can
8.6Very Good
View offer on:
Show more
8
TOYTENSITOYTENSI 80A 2-6S RC Brushless Motor ESC for RC Plane Airplane with SBEC 5V/6V 8A
Main highlights- Programmable via the LCD Program Box or transmitter.
- Pre-installed XT90 connector for the battery and 4.0mm gold connectors for the motor, no soldering is required.
- Power on protection, over-heat protection, low-voltage protection and lost-signal protection.
- High-power switch mode BEC with 5V/6V 8A output, employ more electronic devices, such as receivers and servos.
- High-performance 32-bit microprocessor, compatible with various brushless motors.
8.5Good
View offer on:
Show more
9
FLYCOLORDH 80A 2-6S Waterproof Brushless ESC Electronic Speed Controller with 5V/6V 8A BEC and XT90 4.0mm Banana Head Connector for Model Ship RC Boat
Main highlights- The ESC is waterproof and glued, and the flat water-cooling design ensures efficient heat dissipation. Super smooth start- up and accurate throttle linearity make the ESC suitable for all kinds of RC boat models.
- The ESC has two running modes for different applications:“Forward Only” and “Forward and Backward”.Higher driving efficiency and more energy-saving.
- Support high RPM motors, and compatible with most motors in the market. Support programming via Phone App or LCD program card, easier and more convenient operation
- Adopting new generation craft on the MOSFET, low heat generation, withstand large current instantly, and high reliability. Adopting high performance 32 bit microprocessor, stronger computing ability and faster running speed.
- Adjustable SBEC 5V/6V output voltage provides more powerful power to the servo. Multiple protections: start-up, over-heat, low-voltage cutoff, signal loss, phase loss.
8.3Good
View offer on:
Show more
10
RHINOESCRHINOESC AM32 VE80A Crawler ESC 2-8S BEC 5.2-8.2V Brushless ESC for 1/8 1/10 Scale Crawler Car Axial SCX10 Traxxas TRX-4 TRX-6 (Crawler ESC VE80A)
Main highlights- 5.High Efficiency:Crawler Motor specially customized dual tile strong magnetic design, which makes the motor 120g with wires lightweight, and has stronger explosive power on the basis of small size.
- 4.Smallest Size:of the RhinoCrawler 2820 stator, the outer size of the RM-S20 stator 2820 is only 35x20mm.
- 3.Material:CNC Machined 7075 aluminum front and rear cover.High purity copper windings maximizes efficiency.High toughness stainless steel shaft( Φ 3.175mm), high precision and high quality bearing make the motor super durable.
- 2.Suit For:Special made for RC 1/8 1/10 brushless crawler cars,for LCG Chassis Axial SCX10 Traxxas TRX-4 MOA and pair with RhinoESC VE80A(ESC is suggested,not included.).Multi-mounting system for M3 screws.
- 1.Stable Power:Crawler Brushless Motor,14 Pole 12 Slot Hi-torque rotor design.
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 80a car esc
