10 Best 6 Crossover In The Us - Black Friday 2024
Clarion Mobile Electronics Mcd360 3 Way 6 Channel Electronic Crossover with Subwoofer Control
Main highlights- Remote Subwoofer Level Control (Included) -Gold Plated Terminals
- Package Weight : 1.157 Kg
- Package Quantity : 1
- High-Pass Crossover Frequency Multiplier
- Front/Rear/Subwoofer Lever Control - Subwoofer Equalizer and Boost Level Controls
- Front/Rear/Subwoofer Lever Control
- Country Of Origin : China
- 6/4/2 Channel RCA Inputs
- 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)
- Curious about how we select the top products for you? Explore How It Works
Clarion MCD360V 3-Way 6 Channel RCA Inputs Electronic Crossover with Remote Subwoofer Level Control Adjustable Level Output for Front Rear Subwoofer
Main highlights- "This versatile 3-Way Electronic Crossover offers inputs for two- or three-way system setups with rear fader control. || Users also get a wired remote subwoofer level control. || "
- "This unit is a full-featured Three-Way Crossover. || When used to build a 2-way system with front and rear fader capability or a full three-way system, it allows you to choose from a wide range of crossover points between the front, rear and subwoofer outputs. || "
- "* Subwoofer Equalizer Bass Boost Control || * Remote Subwoofer Level Control || * Ground Loop Isolation Circuit || * Gold Plated RCA & Power Connections || * Frequency Response: 10 to 50.000 Hz || * Signal to Noise Ratio: 100dB || "
- "* High Pass Frequencies: 32 to 8.000 Hz, 32 to 400 Hz Rear || * Subwoofer Line Output: 0 to 18dB || * Center Equalizaing Frequencies 25 to 100Hz || * Dimensions: (W × H × D) 5 1/2-in × 1 3/4-in × 5 1/2-in || * Dimensions:6″(W) × 3/4″(H) × 7″(D) * Package Weight : 1.157 Kg "
- "* 6/4/2 Channel RCA Inputs || * 6 Channel /5 Volt RCA Outputs || * Adjustable Level Output for Front, Rear, & Subwoofer || * Adjustable High & Low Pass Crossover w/Frequency Multiplier || * Non Fade Low Pass Output || "
Audiopipe 6-Way Active Crossover (XV-6-V15), Multiplier Switch, Compact, Power LED Indicator, Subwoofer Bass Boost, Custom Installation, Remote Bass Knob
Main highlights- VARIABLE CROSSOVER FREQUENCY WITH MULTIPLIER SWITCH: This 6-way crossover features a multiplier switch for adjusting the crossover frequency continuously, allowing for precise control over the audio signal.
- THD: 0.04% @ 1KHz | SIGNAL TO NOISE RATIO: >105dB | DIMENSIONS (W x D x H): 230 x 160 x 38 mm
- SEPARATE INPUTS FOR FRONT, REAR AND SUBWOOFER: This 6-way crossover features separate inputs for front, rear, and subwoofer, allowing for a customized and efficient sound experience. With the precise bandpass filter, it offers superior audio quality for all users.
- REMOTE SUBWOOFER LEVEL CONTROL: This 6-way crossover includes a remote bass knob for controlling your subwoofer volume remotely from your dashboard, giving you complete control over your sound.
- POWER LED INDICATOR: Equipped with a power LED indicator, the switching power source of the crossover can easily be identified when turned on, providing a quick and convenient way to verify its status.
- GROUND LOOP ISOLATION INPUT CIRCUIT: This 6-way crossover is equipped with a specialized ground loop isolation input circuit, allowing for optimal audio signal processing without interference, resulting in superior sound quality.
- FRONT AND REAR HIGH PASS OUTPUTS: With front and rear high pass outputs, this 6-way crossover provides superior sound quality and eliminates unwanted frequencies for a cleaner, more precise sound. | NON-FADE LOW PASS OUTPUT: This 6-way crossover features a non-fade low pass output, which allows for a smooth transition in the output signal, ensuring accurate and precise frequency separation for optimal sound quality.
- CUSTOM INSTALLATION: Designed with 4 ISO mounting holes and removable trim ring, this 6-way crossover allows for custom installation and precise tuning of your speakers.
- CAR AUDIO CROSSOVER: Our 6-Way Active Crossover utilizes advanced technology and precise filters to deliver high-quality sound, ensuring an optimal audio experience.
- ADJUSTABLE LOW PASS GAIN: This 6-way crossover features an adjustable low pass gain for precise control over signal filtering, allowing for optimized sound output and greatly improving your audio experience. | SUBWOOFER BASS BOOST: Featuring a clear and powerful subwoofer bass boost, you can take control of your bass for a richer and more dynamic audio experience.
Belkin 6-Foot CAT5e Crossover Networking Cable (Red)
Main highlights- TIA/EIA-568-C Compliant
- PowerSum tested
- Molded-Strain Relief – Bends easily, for durability and fit
- Exceeds the performance requirement of Category 5e – Performance tested to exceed 350MHz
- Available in multiple colors and lengths
- 50-micron gold-plated connectors ensure a clean and clear transmission
Pyle 3-Way Electronic Audio Crossover-Network Hi-Pass And Low-Pass Channel 12dB Octave Slope Power LED Indicator W/Remote Subwoofer Control And Parallel Input Switch
Main highlights- SUBWOOFER FREQUENCY CONTROL: With the stereo, the X20 Frequency Multiplier for Front Channel provides you total control over your sound. The subwoofer channel between 300 and 4.8 kHz is used to set the low-pass crossover frequency
- POWER LED INDICATOR: This 3 way cossover network has a power on LED indicator that illuminates when the switching power source is turned on. including a remote subwoofer volume control, a parallel input switch, and a mixed in/out switch
- CROSSOVER INCLUDED: This 3 way crossover subwoofer comes with a 4 phillips head screws, remote unit with remote wire and 3A chip fuse adding a boost frequency of 40Hz up to 400 Hz levelling up your subwoofer audio
- AUDIO CROSSOVER: This 3 way crossover network with remote subwoofer control features a low pass crossover of 12dB per Octave Crossover Slope and a X20 Frequency Multiplier for Front Channel
- 3 WAY ELECTRONIC DIMENSIONS: This crossover network has a dimension of 10.4'' x 6.3'' x 1.5'' -inches with an approximate weight of 2.87 lbs. It also has a Subwoofer Equalizer and Boost Level Controls
Cable Matters 2-Pack Crossover Adapter (Crossover Cable Adapter)
Main highlights- Superior construction includes RJ45 connectors with gold-plated contacts in a sturdy housing; Raging red color makes identification easy in a crowded toolkit or desk drawer
- Crossover wiring reverses the transmit TX pair, pins 1 and 2, and the receive RX pins 3 and 6, to allow two computers to communicate (see the wiring diagram above); Both connected devices may require network configuration in order to communicate
- Crossover adapter allows network equipment to communicate with each other directly by connecting a Cat5 or Cat6 cable
- Cost-effective 2-Pack adapter converts a standard network patch cable to a crossover cable
- Connect two workstations together to transfer files or share a printer; Connect a patch cable in the desired length to this adapter instead of using a long or short crossover cable
C2G 27861 Cat6 Crossover Cable - Snagless Unshielded Network Crossover Ethernet Cable, Red (3 Feet, 0.91 Meters)
Main highlights- Use - This snagless unshielded cat6 patch cable will easily transfer files and data between two computers by using this cable to connect and create a peer-to-peer network
- High Quality - Each snagless UTP ethernet cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements, and each is bonded together to help maintain the twist-spacing throughout the line right up to the termination point
- Durable - With a copper braid and PVC jacket, this patch cable is designed to support 10 Gigabit data transmission from 10GBase-T ports and equipment, like network adapters, hubs, switches, and more
- Cat6 Crossover Patch Cable - One (1) Red 3 Foot Crossover Ethernet Cable with RJ45 Male Connector
- Cables 2 Go Brand, C2G has provided connectivity solutions for a variety of markets, including corporate, education, healthcare, home theater, digital signage, hospitality, and more, joining Legrand in 2014
C2G Cat6 Crossover Patch Cable, Snagless Unshielded Cat6 Patch Cable, Red Crossover Ethernet Cable, 10 Foot Snagless UTP Ethernet Cable, C2G 27863
Main highlights- Use - This snagless unshielded cat6 patch cable will easily transfer files and data between two computers by using this cable to connect and create a peer-to-peer network
- Jacket: PVC
- High Quality - Each snagless UTP ethernet cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements, and each is bonded together to help maintain the twist-spacing throughout the line right up to the termination point
- Fast, fast, fast - for data/voice/video distribution! This 550 MHz-rated patch cable ensures you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications.
- Durable - With a copper braid and PVC jacket, this patch cable is designed to support 10 Gigabit data transmission from 10GBase-T ports and equipment, like network adapters, hubs, switches, and more
- Connector: 50 micron gold-plated RJ45
- Conductor: 24 AWG stranded copper
- Cat6 Crossover Patch Cable - One (1) Red 10 Foot Crossover Ethernet Cable with RJ45 Male Connector
- Cables 2 Go Brand, C2G has provided connectivity solutions for a variety of markets, including corporate, education, healthcare, home theater, digital signage, hospitality, and more, joining Legrand in 2014
PRV AUDIO Crossover Car Audio EX3.5 STEREO 3 Way or 2 Way Electronic Crossover 9 Volts, 4 in 6 Out RCA Channels Car Sound Processor
Main highlights- UPGRADE TODAY, HEAR THE DIFFERENCE: this PRV audio crossover brings innovation and technology to the automotive sound market for the past +15 years.
- PRV CROSSOVER: Designed for seamless performance, this crossover is equipped with quick On/Off buttons for each channel, allowing for easy control. The Butterworth 12 dB/Octave Crossover slope rate ensures smooth transitions between frequencies.
- FINE TUNE CAR AUDIO: Featuring 3-way adjustable HIGH PASS and LOW PASS filters, output level control on each channel, and an adjustable BASS BOOST option on the Sub Out channel, fine-tune every detail of your sound to perfection.
- CAR AUDIO CROSSOVER: Unlock the power to customize your sound like never before. With the PRV EX3.5 Stereo electronic crossover, enjoy a wide frequency range of filter adjustment to create your perfect stereo sound.
- 2 WAY OR 3 WAY CROSSOVER CAR AUDIO: Connect with ease using the 2/4 RCA inputs, which support 2 Channels (1 Stereo and 1 Mono) and or 6 RCA outputs for 3 Channels (2 Stereo and 1 Mono), giving you the flexibility to adapt your audio setup to suit your needs.
Black Friday Sale
Deal ends in
HrsMinSec