10 Best 5v 18650 Power Bank In The Us - Black Friday 2024
Best Choice1
GeeekPiGeeekPi UPS V5 Power Supply Uninterruptible UPS HAT for Raspberry Pi, Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 5/4B/3B+/3B/2B/B+/B/A+/A
Main highlights- UPS Plus is a new generation of UPS power management module which supports OTA firmware upgrade and supports RTC onboard.
- There are two INA219 chip onboard to detect batteries voltage and the voltage output from UPS Plus to Raspberry Pi.
- Package Inlcudes:1 x UPS Plus For Raspberry Pi,4 x M2.5 copper pillar,4 x M2.5 screws,4 x M2.5 long copper stick,4 x M2.5 nuts,1 x Acrylic shield,1 x Instruction
- Compatible with Raspberry Pi 5/4B/3B+/3B/2B/B+/B/A+/A
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
LIJIANILIJIANI Battery Charger Case,Portable DIY Power Bank Box with LCD Display 2 USB Output,Micro and Type c Input, Smart Charger for 3.7v Li-ion Rechargeable Battery (Battery Not Included)
Main highlights- Multifunctional charging case: 4 battery(0.7 inches in diameter - 2.56 inches long) charging case, LCD display battery voltage and current value, the remaining battery power. Can easily remove the battery to power other devices
- Mobile power function: filled with batteries, it is a 10000 mah rechargeable treasure (choose 4 2500 mah batteries), if you choose 3500 mah / a battery, it is 14000 mah rechargeable treasure. Not recommended, different sizes of batteries loaded into use at the same time
- Dual-port input : (MICRO and TYPE-C) 5V-2A, two USB output, 5V-2A, long press the switch can open the flashlight function
- Concern: This product does not include batteries, unfamiliar with Cylindrical lithium batteries, people without DIY spirit, please be careful to buy
- Bad battery detection function: if you load a bad battery, or the battery positive and negative poles are installed backwards, no battery symbols on the LCD display, only normal batteries appear battery symbols
9.7Exceptional
View offer on:
Show more
3
QCCANQCCAN 3pcs Lithium Battery Charger Board LED Dual USB 5V 2.4A Micro/Type-C USB Mobile Power Bank 18650 Charging Module Circuit Protection
Main highlights- The module is a portable backup power supply with an input that matches the 5.0V adapter to charge the internal battery. Use built-in battery for portable device to provide 5.0V/3.0A USB2.0 supply output for external devices.
- Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!
- Dual output current: 5V 2.4A; Input voltage B+ to B-: 3.0 - 4.2V; Protection: overcharge protection, overdischarge protection, short circuit protection, constant current.
- Charging cable: support three type of USB Cables for iPhone Lightning & for Android Type-C Micro USB
- Button function: Press and hold the button after standby, the LED digital screen displays the power.
9.6Exceptional
View offer on:
Show more
4
UMLIFEUMLIFE 4pcs 18650 Charging Board ，Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Main highlights- overcharge protection, overdischarge protection, short circuit protection, constant current.Suggest Working Conditions:Max continuous charge/discharge current 1.5/2.4A,working temperature: -5～45℃.
- Size: 6.5 * 2.5 * 0.1cm;
- Dual Output Current: 5V 2.4A；Constant Current: 2.4A;
- Charging cable: support three USB data cable charging, including for Iphone and Android.
- Attention : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out
9.5Excellent
View offer on:
Show more
5
AOICRIEAOICRIE Dual USB 18650 Battery Charger Protection Module 4pcs, Power Bank PCB Module Board, Dual USB 5V 1A 2.1A
Main highlights- The word "IN" will be shown in the display; Output indication: Long press the LED button after turning on the load, Start output, The word "OUT" and the current and voltage of 5.0V1.0A or 5.0V2.1A will be displayed in the display.
- The protection circuit of the boosted lithium battery has been integrated, prevent over-discharge, over-charge, overload short circuit protection, over current protection, and over temperature protection.
- Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
- LED indicator and LCD display: When charging, the display will show IN letters; after the load is connected, long press the LED light button to start the output, and the display will show OUT letters and the relative output voltage and current 5V1A or 5V2.1A.
- It is possible to connect only one lithium battery or multiple lithium batteries in parallel. The capacity of connected battery is no more than 200,000 mA, As long as the battery with a voltage of 3.0-4.2V can be used.
9.3Excellent
View offer on:
Show more
6
diymore28% Offdiymore 1865O Battery Holder Double Li-ion V8 Battery Shield Micro USB 5V/3A 3V/1A Power Bank Battery Charging Module for Raspberry Pi and Arduino ESP32 (2 Holders)
Main highlights- Supports up to two Li-ion batteries. It is recommended to use two 18650 batteries, which can be longer! The cell has to be 65mm.
- Supports 5V 2.2A voltage outputs.
- Supports 3V 1A voltage outputs.
- Special attention: the installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative! Installation errors will burn out the module!
- Micro USB charging current is 600mA-800mA.
9.2Excellent
View offer on:
Show more
7
RooyarPower Supply Box USB 5V 9V 12V Output 3Pcs 18650 Battery Powerbank Case for Router (Battery Not Included)
Main highlights- This battery case features easy to use switches and requires three new 18650 batteries (not included), providing a stable power supply with multiple output option including a USB port.
- The small size designs, coupled with a 40cm 5.5x2.1mm splitter cable, makes this Uninterrupted Power Boxes a convenient power backup solution, safeguarding your electronic against unexpected power interruptions.
- Suitable for enthusiasts and professional who rely on stable power for routers, surveillances cameras, smartphones, and tablets, ensuring their gadgets remain running well.
- Perfectly for use home offices, security setups, or any location where consistent power isimportant, keepings your LED lights,and speakers running smoothly during outages.
- Ensures uninterrupted power to your devices with this Uninterrupted Power Boxes, suitable for 5V, 9V, and 12V electronics, perfectly for maintaining connection and security.
9.1Excellent
View offer on:
Show more
8
WWZMDiBWWZMDiB 18650 Battery Shield Micro USB 5V/3A 3V/1A Power Bank Battery Charging Module for Raspberry Pi and Arduino ESP32
Main highlights- Support 3V / 1A and 5V / 2.2A two voltage output!
- Special attention: the positive and negative poles must be determined for installation, and the positive and negative poles are clearly marked on the board! Wrong installation will burn the module!
- Please charge and activate the board before use, otherwise it will not work properly
- Intelligent input and output without worrying about long charging time.
- Alarm protection when the battery is lower than 3V, and completely shut down without action when the battery is lower than 2.4V
9.0Excellent
View offer on:
Show more
9
DiitaoDiitao 6PCS 18650 Charging Board,18650 Charger Board Dual USB 5V 2A 1A Mobile Power Bank Module Lithium Battery Charger Board Short Circuit Protection DIY Power Bank Board
Main highlights- Size: 69x 24mm;Dual output current: 5V 2.4A;Input voltage B+ to B-: 3.0-4.2V.
- Protection:Overcharge protection, overdischarge protection and short circuit protection.
- Note:The positive electrode of the battery is connected to B+, and the negative electrode is connected to B- (do not reverse)
- Charging cable:Support three USB data cable charging,useful and convenient.
- 18650 Charger Board:The module is a portable backup power source that charges the internal battery.
8.9Very Good
View offer on:
Show more
10
JOYSOGJOYSOG 18650 DIY Power Bank Case for 18650 Battery Power Bank, 3 USB Rechargeable Battery Charger DIY Box Micro/Type C Input Mobile Power Bank Case (White)
Main highlights- This Portable DIY Power Bank Box with LCD Display of power, keep the battery status at any time. Plug and Play, ready to charge.
- The battery capacity must be the same. Do not reverse the battery, otherwise the motherboard will be damaged.(The sheet is positive and the spring is negative.)
- Small and light 100000 mAh 18650 DIY Battery Bank. easy to carry and store, convenient to use.
- Made of high quality ABS material, sturdy, durable and long service life.
- Large capacity, 3 x 18650 batteries (batteries not included). the 18650 power bank case shell has 3 input ports, 5V/1A charge modes.
8.8Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 5v 18650 power bank
