10 Best 5015 12v Fan Pwm In The Us - Black Friday 2024
Best Choice1
WINSINNWINSINN 50mm 5015 Blower Fan 12V, 3D Printer 12 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)
Main highlights- ️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products.
- ️WINSINN 5015 blower fan 12V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- ️Rated Voltage: DC 12V, Current: 0.15A, Power: 1.8W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA
- ️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
WDERAIRWDERAIR 12V DC Brushless 5015 High Speed Radial Blower Fan Dual Ball Bearing 2Pin with 39inch Cable for 3D Laser Printing and Small Appliance Replacement Upgrade Cooling (Pack of 2Pcs)
Main highlights- 【Longer cord】39inch-Provides more flexibility and convenience, Change to your desired length
- 【High Speed】Suitable for LED equipment、humidifiers、3D printers (Ender Series)、high-precision instruments、purifiers、UPS power supply、communication equipment or replacement of small fans of electronic products. Cooling and dust removal for equipment, strengthening ventilation and extending the service life of equipment
- 【Double Ball Bearing】High quality. |Suitable for long-term work. |Long life: 50,000 Hours
- 【50mm blower】50 X 50 X 15 mm ( 1.97x1.97x 0.6 inch) | Rated Voltage: 12V | Current : 0.14A | Power: 1.5W | Speed : 6000PRM | Air pressure: 1.21 In H2O | Airflow : 5.36CFM | noise: 38dBA
- Please feel free to talk to us if you have any problems using the product or need technical support. We will reply within 24 hours
9.7Exceptional
View offer on:
Show more
3
GDSTIME11% OffGDSTIME 2-Pack 50mm x 15mm Blower Fan 12V 5015 Dual Ball Bearing DC Brushless Cooling Turbo Fan 2 Pin 39 inch Cable for 3D Printer Accessory
Main highlights- WIDELY USED: 50mm brushless dc blower fan; used in 3D printers, humidifier, humidor, aromatherapy, heaters, small PC and other small appliances series repair replacement
- HIGH SPEED: Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright; Noise Level: 38.7 dBA
- ENOUGH LONG: 3.28ft (100cm) 2-wire terminated with XH2.54-2Pin connector for power supply; meet connection needs (Red wire : positve, Black: negative)
- EASY TO INSTALL: Blower Size: 50mm L x 50mm W x15mm H, Air Intake Size: 32.5mm, Air Outlet Size: 19.5x15mm, Mounting Spacing : 2.24 in; Operating Voltage Range: 7 to 13.5V
- 5015 BLOWER: Rated Voltage: 12V DC | Current: 0.1Amp | Power: 1.5 Watt | Airflow: 5.36 CFM | Static Pressure: 1.21 In H2O | Fan Speed: 6000 RPM
9.6Exceptional
View offer on:
Show more
4
WINSINNWINSINN 50mm 5015 Blower Fan 12V, 3D Printer 12 Volt Fans Blower Turbine Turbo Hydraulic Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)
Main highlights- ️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products.
- ️WINSINN 5015 blower fan 12V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- ️Rated Voltage: DC 12V, Current: 0.15A, Power: 1.8W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA
- ️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours.
- ️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm
9.4Excellent
View offer on:
Show more
5
MakerFocusMakerFocus 4pcs 50mm 5015 Blower Fan 12V 3D Printer Fan Turbine Turbo Blower Dual Ball Bearings Brushless Quiet 50x50x15 Fan for 3D Printer and Other Small Appliances Series Repair Replacement
Main highlights- Product Dimensions: 3D Printer Fan: 50mm x 50mm x 15mm; Blade Diameter: 47mm, Cable Length: 300mm
- Parameters: Voltage: DC 12V, working current: 0.16A, motor power: 1.92W, wind pressure: 16.15mm₂HO, connector: XH2.54-2P
- High-performance Output: Blower fan 12V has good heat dissipation, its large air volume and high rotation speed (air volume: 3.23CFM; rotational speed: 5500±10% (r/min)) can quickly cool down the machine and ensure that your machine works normally
- Durable: The 12V cooling fan is made of high-quality ABS material and metals, with high bearing precision, long life, low noise, very strong and durable, can be used for 50,000 hours
- Dual Ball Bearings: 5015 blower fan adopts dual ball bearings design. There are many tiny steel balls in the ball bearings that rotate around the center of axis. Low friction, no oil leakage, long life and high speed
9.3Excellent
View offer on:
Show more
6
TaidacentTaidacent 2510-4P 3P Manual 4 Wires 0-5V 12V Fan Speed Controller PWM Speed Control On Off Switch for PC CPU Case Fan with Knob (Solder Connector with Plastic Black Knob)
Main highlights- This is a four-wire PWM fan speed controller. It can only control 12V four-wire fans that support PWM speed regulation. For example, many 12V four-wire chassis or CPU fans cannot control 2-3-wire fans.
- Pay attention to the positive and negative poles and the power supply voltage. After the power supply fan is connected, it can be used. The potentiometer is turned off counterclockwise to the end, and the clockwise end is the maximum output. A separate small adjustable resistor (starting speed adjustment) on the board is used to adjust the speed of the just-open position.
- If the speed of the fan changes and the direction of adjustment is opposite, it means that the fan is a reverse-sequence fan, and the (PF) setting point needs to be short-circuited with solder, and the power must be turned off before operation to avoid damage! The short-circuited PWM signal changes in the reverse direction with the adjustment, and the reverse-sequence fan can realize forward adjustment.
- Fan current 3A this current is limited by switches and connectors, and the capacity can be expanded by taking the power line separately. For fans over 3A, connect a large current fan method: the positive and negative poles of the power supply of the fan can be connected to the power supply, the positive and negative poles of the fan are connected to the power supply separately, and the negative pole of the fan is connected to the negative pole of the board; speed measurement and control are connected to the board .
- Consumption less than 20mA without fan PWM signal model 0-5V 25Khz PWM signal output range 0% to 100% Start of PWM adjust range 0% to 60% Output interface 2510-4P, 2.54mm space Size 26*20mm, knob screw extension 15mm installation opening 7mm
9.1Excellent
View offer on:
Show more
7
GDSTIME30% OffGDSTIME 5015 50mm x 50mm x 15mm 12V Dc Brushless Cooling Fan (2Pack)
Main highlights- Rated Voltage: DC 12V; Rated Current: 0.1Amp; Rated Speed: 5000 RPM; Air flow: 12.5CFM; Noise: 32dBA; Power: 0.8Watt.
- Package include: 2 x 50mm cooling fans; 8*M3X18mm screws nuts( The fan is mounted by screws.)
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Dimension of outer the frame is 50mm(L) x 50mm(W) x 15mm(H) / The size of fan in inch is 2in(L) x 2in(W) x 0.6in(H); The center to center distance beween the mountiong holes is 40mm/1.57in.
- Connector: XH2.54-2Pin; Lead wire: UL Type (positive): Red wire ; (negative): Black wire. This is a two wire cooling fan; Bearing Type: Sleeve Bearing ; Life: working up to 35000h at 25 degrees
8.9Very Good
View offer on:
Show more
8
WINSINNWINSINN 5015 Blower Fan 12V, 3D Printer 12 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 2Pcs)
Main highlights- ️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication devices for heat radiation, PC CPU server, DVRs, switches, network storage devices and can be used as a replacement fan for any electronic products.
- ️WINSINN 5015 blower fan 12V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- ️Rated Voltage: DC 12V, Current: 0.15A, Power: 1.8W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA
- ️Packing List: 2 x 50mm Blower Fan 12v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm
- ️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
8.8Very Good
View offer on:
Show more
9
RuiLingRuiLing 4-Pack 5015 DC 12V 0.18A Cooling Blower Fan 6000Rpm Industrial Cooling Turbo Fan for 3D Printer Accessories,Mini Black Plastic Cooling Fans 50x50x15mm
Main highlights- Type: 12V Cooling Blower Fan,Fit for self-control equipment, chassis cabinet,electric welder,computer, etc.
- Perfect for cooling heatsinks on hot ends, prints, or other cooling needs. Widely used in Printers, humidifiers, heaters, clothes dryers, etc.
- It is safe and environmentally friendly. The quality of the original materials is good and we have a strict quality control system.
- High Quality:Stable performance, strong power, low noise, long service life.
- Dimension:50x50x15mm/1.97x1.97x0.59";Voltage: 12V;Speed: 6000RPM.
8.7Very Good
View offer on:
Show more
10
WathaiWathai 5015 Blower Fan 12V, Ball Bearing DIY Brushless Cooling for Ender 3 with 1000mm/ 39in Wire, Turbo Centrifugal 12 Volt Fans Replacement 2 Pack
Main highlights- Powerful Airflow: Its compact size of 50mm x 50mm x 15mm makes it suitable for tight spaces. with an XH2.54 connector and an 39in(100cm) cable length
- Micro 12V Blower Fan: designed to meet the requirements of 3D printer hotends and nozzles, or any DIY cooling needs that demand a compact and lightweight design
- High-quality Ball bearings: With 1-year warranty, balances price and performance, making it suitable for daily use with a lifespan of 5,0000 hours
- High Performance: rated: 12V, current : 0.14A ; power: 1.5W; speed : 6000PRM; air pressure of 0.79 In H2O; airflow : 4.42CFM; noise: 42dBA
- DIY Project: This blower fan is widely used for providing high air volume to small areas that require cooling or ventilation. It’s applicable to various electronic products and can be used as a replacement fan, such as for humidifiers or aromatherapy devices
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 5015 12v fan pwm
