10 Best 433 Mhz Rx Module In The Us - Black Friday 2024
QIACHIP 433Mhz Wireless RF Switch Long Range DC 12V 4CH 4Channel Wireless Remote Control Switch, Relay Receiver Module, Transmitter Momentary Toggle Switch RF Relay (4 Transmitter & 1 Receiver)
Main highlights- 【Wide Application】WIDE range of APPLICATIONS from simple domestic remote control to autonomous control such as, window, entrance, Garage Doors, alarm system, lifting equipment and so on. NOTEPlease email us if you meet any problem, we are always here to help, thanks!
- 【Reliable Quality】The equipped remote control transmitter is more beautiful and better quality than ordinary remote controlStable and reliable performance, high receive sensitivity.
- 【Long Range】 Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Range is up to 138ft/40m with no obstacle.
- 【Easy to use & Security 】Learning code has high-level security for its low repetitive rate and extremely easy to setup, learn by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
- 【4CH for More Control】Adjustable working way, control equipment turn/reverse, o n/off. Switch Self-lock, Jog, Inter-lock.
- Curious about how we select the top products for you? Explore How It Works
QIACHIP 3 Sets of 433mhz RF Transmitter and Receiver Module Wireless 4 Channel Output Link Kit Set with 1527 Learning Code for Remote Control
Main highlights- Wide voltage input (transmitter) :DC 3V-24V
- Superheterodyne
- Small size
- Multiple working modes : Momentary Mode, Toggle Mode, Latched mode
- Application environment: Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, remote control socket, remote control LED, garage door remote control, remote control door opener, remote control curtains, alarm host, remote control MP3.
QCCAN 5pcs 433mhz Wireless RF Transmitter and Receiver with Antenna Ask Remote Control Module DIY Kit for Arduino
Main highlights- Support ASK / OOK modulation, the receiver sensitivity of -108dBm.
- Mains input voltage range: 2.2V-5V; Operating frequency: 433.92 MHz, bandwidth of about ± 150KHz.
- Low-power performance, along with high dynamic range (greater than 60dB). Module uses highly integrated chip, built front-end low-noise amplifier,Mixers, filters, frequency synthesizer circuit, etc., can maximize the signal optimization.
- Applications: Can be used for wireless power switch, socket, remote control switch, receiver module, smart home products, remote control curtains, remote MP3, and so on.
- 433mhz RF Transmitter and Receiver Superheterodyne UHF ASK Remote Control Switch Module For Arduino Wireless Diy Kit.
D-FLIFE 5pcs 433mhz Wireless RF Transmitter and Receiver with Antenna Ask Remote Control Module DIY Kit for Arduino
Main highlights- Support ASK / OOK modulation, the receiver sensitivity of -108dBm.
- Mains input voltage range: 2.2V-5V; Operating frequency: 433.92 MHz, bandwidth of about ± 150KHz.
- Low-power performance, along with high dynamic range (greater than 60dB). Module uses highly integrated chip, built front-end low-noise amplifier,Mixers, filters, frequency synthesizer circuit, etc., can maximize the signal optimization.
- Applications: Can be used for wireless power switch, socket, remote control switch, receiver module, smart home products, remote control curtains, remote MP3, and so on.
- 433mhz RF Transmitter and Receiver Superheterodyne UHF ASK Remote Control Switch Module For Arduino Wireless Diy Kit.
5Pcs 433MHz RF Wireless Transmitter and Receiver Module Kit for ARM/MCU
Main highlights- Wireless Transmitter Modules: It allow your to wirelessly communicate with radio frequency (RF) controlled devices that operate in the same frequency (433Mhz in this case).
- Package included: 5 x 433MHz Wireless Transmitter Module+5 x 433MHz Wireless Receiver Module
- Note: The VCC voltage should be consistent with the working voltage of the module, and the power filter should be done well; The position of the antenna should be as straight as possible, away from the shield, high voltage and interference source.When used,the receiving frequency, decoding mode and oscillating resistance should match the transmitting.
- Easy to Use: The antenna has a great influence on the receiving effect of the module,it is better to connect the antenna with 1/4 wavelength. Generally, 50 ohm single-core conductor is used. The antenna length of 433M is about 17cm.(Note:No antenna, please bring your own antenna.) Nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without pulling cables then this device will help you well.
- Applications: The transmitter and receiver modules for increasing the communication distance. And the frequency is 433MHz.It is widely used in remote control systems, such as remote control switch/curtain/sockets/LED/audio/door/rolling gate/door opener, shutter and other door control systems, alarm host, alarm, remote control motorcycle, remote control controlled electric vehicle, remote control MP3, receiving module, automobile anti-theft products, home anti-theft products, electric doors,etc.
HiLetgo 5 Sets 433M Transmitter + Receiver Kit High Frequency Super Regenerative Transceiver Module for Burglar Alarm
Main highlights- Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that operate in the same frequency (433Mhz in this case)
- This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly!
- They work in pairs, meaning you need both a receiver and a transmitter to comunicate with each other
- Easy to use, nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without pulling cables then this device will help you well
- Compatible with SparkFun’s 434MHz RF transmitter and RF receiver
XIITIA 6pcs 433mhz Wireless RF Transmitter and Receiver with Antenna Ask Remote Control Module DIY Kit for Arduino DIY Kits
Main highlights- 【Applications】: Can be used for wireless power switch, socket, remote control switch, receiver module, smart home products, remote control curtains, remote MP3, and so on.
- ★Support ASK/OOK modulation, the receiver sensitivity of -108dBm.
- ★Mains Input Voltage Range: 2.2V-5V; Operating Frequency: 433.92 MHz, bandwidth of about ± 150KHz.
- ★Low-power performance, along with high dynamic range (greater than 60dB). Module uses highly integrated chip, built front-end low-noise amplifier,Mixers, filters, frequency synthesizer circuit, etc., can maximize the signal optimization.
- ★433mhz RF Transmitter and Receiver Superheterodyne UHF ASK Remote Control Switch Module For Arduino Wireless Diy Kit.
5 PCS 433mhz Wireless RF Transmitter and Receiver with Antenna Ask Remote Control Module DIY Kit for Arduino
Main highlights- Support ASK / OOK modulation, the receiver sensitivity of -108dBm.
- Mains input voltage range: 2.2V-5V; Operating frequency: 433.92 MHz, bandwidth of about ± 150KHz.
- Low-power performance, along with high dynamic range (greater than 60dB). Module uses highly integrated chip, built front-end low-noise amplifier,Mixers, filters, frequency synthesizer circuit, etc., can maximize the signal optimization.
- Applications: Can be used for wireless power switch, socket, remote control switch, receiver module, smart home products, remote control curtains, remote MP3, and so on.
- 433mhz RF Transmitter and Receiver Superheterodyne UHF ASK Remote Control Switch Module For Arduino Wireless Diy Kit.
kwmobile 433 MHz Transmitter and Receiver Module Kit for Remote Control Raspberry Pi Arduino Pack of 3
Main highlights- UNIVERSAL: The kwmobile 433 MHz wireless module is usable for a variety of wireless remote control mechanisms; GPS, and other projects. Furthermore you can use it with a external antenna (not included).
- TECHNICAL SPECIFICATIONS: Transmitter: MX-FS-03V / Receiver: MX-05V; Range: 20 - 200m; Operating mode: AM / Sensitivity: -105dB
- PLEASE NOTE: To enlarge the reception range, you should solder or plug a copper wire to the XY-FST of the ANT contact point.
- EXAMPLE OF USE: This module is versatile - e.g. wireless outlets, alarm systems, lights and else. Let your creativity run free.
- COMPATIBILITY: Compatible with Raspberry Pi and Arduino devices.
Alinan 5Sets 433MHZ SYN115 SYN480R Wireless Transmitter & Receiver Module Kit Ask/OOK Chip PCB
Main highlights- 【Transmitter】 : 1. on-board single-chip ASK transmitter chip SYN115/F115
- 【Satisfaction Guaranteed】: If you have any questions during use, please feel free to contact us and we will reply you immediately
- 【Receiver】: 1. on-board single-chip wireless SYN480R ASK/OOK receiver chip
- 【Package Included 】: 5 sets x 433MHZ Transmitter & Receiver Module SYN115 SYN480R ASK Wireless Module
- ★We are a professional supplier of integrated circuit products. Just search keywords in our store. I believe you can find the Product you need.
Black Friday Sale
Deal ends in
HrsMinSec