3d Pei Hotbeds of 2025
Best Choice1
FYSETCFYSETC Ender 5 Plus Build Plate Smooth PET - Textured PEI Sheet Dual Side Flexible Spring Steel Platform with Magentic Base 377x370mm/14.84x14.56inch 3D Printing Hotbed Cover Part
Main highlights- Wide 3d printing material: Compatible with various kinds of filaments, such as PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD etc. The adaptation temperature of different materials is different, please adjust it reasonably. Reference bed temperature: PLA(50-65℃), PETG(70-80), TPU(60-70), ABS(90-100, recommend on Powder-coated sheet). Note: Please keep nozzle not directly touch to avoid scratch or permization. Better to clean the surface before printing.
- Great first layer adhesion: Do Not sand this CarbonPET bed to avoid permanent damage. No glue, No tap, Adjusting an Appropriate Z value is very important. If setting the nozzle too low will cause a filament buildup and easily scratch the print bed. Too high, the prints come off the build plate, can't stick onto the hotbed well. KEY factors for A Good Layer: Turn off the fan and Slow down the speed to 100 when do 3d printing project's first layer. A roll of dry filament also helps.
- Ender 5 Plus Upgrades Build Plate: Double Sided Smooth and Textured Material Design. Explore the dual-sided design with a smooth PET-coating for a glossy finish and textured PEI surface for a matte finish. This cost-effective and versatile solution caters to diverse printing needs, providing both smooth and textured options. The stability of double-sided PEI surpassesPET, supported by results from multiple experiments. Perfect replacement for stock glass bed.
- Easy to maintain: Utilizing our PET+PEI spring steel sheet is straightforward. Clean the surface with isopropylalcoholl, heat the hotbed, level the hot bed with auto leveling tool kit, then start printing. After printing, let the platform cool, gently bend the PEI sheet to remove the print. Consider the nozzle-hotbed distance to prevent scratching the PETfilm, and remember that is consumable and may lose adhesiveness over time. Place it away from other sharp objects to avoid damage.
- 3D Printer Application: Size 377x370mm/ 14.84X14.56inch, suitable for Ender 5 Plus Or other 3D printers with the same size hotbed, not relying on the printing volume. Please measure the size of your printing platform before purchasing. If you are not sure, you can contact us to communicate and confirm. Note: The cost of the product is very expensive. In fact, it is not easy to produce and transport, and the quantity is small. We are very grateful for your love and care for the product.
9.8Exceptional
View offer on:
Show more
How do we rank?
Using our advanced technology, we scan thousands of products and stores, analyzing reviews, ratings, and trends to find what matters most to users like you.Our team then reviews the data and real user feedback, combining AI and human insights to bring you real-time, top-rated recommendations to guide your decisions with clarity and confidence.
Value for Money2
Xiuganpo3D Printer Build Plate, 430x430mm Double Sided PEI Sheet Magnetic Spring Steel Flexible Heated Bed Flexible Print Build Plate Flex PEI Buildplate Printing Hotbed Parts for 3D
Main highlights- [Wide Compatibility] With a size of 430x430MM, our 3D printer build plate is compatible with for Kobra2 Maximum, for ELEGOO Neptune 3 4 Maximum. Please ensure compatibility with your printer print size.
- [Strong Adhesion] This PEI build has superior adhesive properties to support various printing materials like PLA, ABS, TPU, TETG, Nylon, eliminating the need for extra glue.
- [PEI Powder Coating] The flexible build plate features double sided PEI powder coating, with matte texture, abrasion and scratch resistant, highly heat up to 200℃.
- [Easy Model Removal] Our 3D printer build allows for easy model removal by simply bending the steel plate. The handle design makes it easy to remove.
- [Double Sided Printing] The double sided PEI plate enables printing on both sides. Easily place it on the heating bed and peel off the protective film to print directly.
9.7Exceptional
View offer on:
Show more
3
FYSETCFYSETC 3D Printer CR10 Buildplate Steel Spring Sheet Bed 310x310mm/12.2x12.2 inch Steel Plate with PEI + Sticker Base B Hotbed Cover for Ender 3 Max CR-10S Pro CR-X MP Make-r Pro LK1/ PRO LK5 PRO
Main highlights- Strong Sticker Base with adhesive, so you can heat your bed to high temps for specialty filaments and not worry about loss of performance
- Size:310*310mm/12.2*12.2 inch, for MP Make-r Pro Tenlog D3 Pro, LK1/ PRO LK5 PRO/Artilery X1, a bit short for CR-10 10S Pro CR-X. But if your printing area is not big, it's ok too.
- Kindly Tips: We have helped you stick PEI on the steel plate, use machine, so you no longer need to worry about bubbles. if you received package but found the air bubbles or Scratches, please don't worry, they are the surface layer, PEI will not be affected.
- Before printing, please remove the protect film which stick on the PEI surface, attach to your print bed via the Sticker Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
- 2 in 1 Kit: Custom designed PEI materials to make your print easy to adhere to the printing surface, flexible, removable. NOT recommend to print HIGH Temperatur printing materials such as ABS etc which needs OVER 80℃/176℉ on this plate. If for high temp filaments, please search Double-sided Powder Textured Plate Kit(ASIN: B096Y1V5PS) at our store. And we have the individual steel plate sticky one pei Only(ASIN: B092V41NN2) .
9.4Excellent
View offer on:
Show more
4
HBFEYSZY255x300mm PEI Sheet Build Plate PET/PEO Carbon Fiber Hotbed Sticker Compatible for SOVOL SV01 Pro SV02 Magnetic Base 3D Printer Parts(PEIxPEI (no Base))
Main highlights- Ideal for a variety of filaments, providing excellent performance for both beginners and experienced users.
- Features a carbon fiber hotbed sticker for enhanced durability and heat resistance.
- Easy to install on magnetic bases, allowing for quick setup and hassle-free printing.
- Compatible with SOVOL SV01 Pro and SV02, ensuring a perfect fit for your 3D printing needs.
- 255x300mm PEI sheet designed for optimal adhesion and easy print removal.
9.1Excellent
View offer on:
Show more
5
FYSETCFYSETC K1 Max Build Plate - Upgrade PET Print Bed - 310x320 PEI Sheet: Smooth Textured Double Sides Flexible Spring Steel Hotbed Cover Removable 3D Printer Printing Surface(Without Magentic Base)
Main highlights- 5. Ease of removal: fit for almost print material, after cooling it pops right off - even the skirt! Dual handles and positioning hold design make it easier to install and use. Makes a better bedplate and that the finish it gives the surface is very nice and more textured while being super grippy for that initial layer adhesion, and somehow allowing your prints to literally pop off the bed once you bend it. You can clean it with sope when switching between materials like PETG and PLA.
- 4. Upgraded 320x310 Bed Adhesion Fixed: Double-sided textured PEI and "Carboon Fiber" PET platform is designed for easy replacement. When one side becomes worn or damaged, simply flip it over and utilize the other side, extending the lifespan of the platform. One more thing to note is that you need to adjust your Z-offset since each texture side is different thickness creating a different distance from the printing platform when doing a 3d printing project.
- 3. Reference bed temperature: PLA(50-65℃/ 122℉-149℉), PETG(70-80℃/ 158-176℉), TPU(60-70℃/ 140-158℉), ABS(90-100℃/ 194-212℉, recommend on the Gold side). The textured PEI side is more friendtly with ABS. Note: Please keep nozzle not directly touch to avoid scratch or permization. Give reliable adhesion: Adjust an appropriate Z Offset is very important to get a flat first layer bed adhesion TO avoid fried noddles. And Keep Filament DRY is also a MAIN factor for a successful print journey.
- 2. K1 Max 315x310 Bed Sheet: Size: 320X310mm/ 12.6*12.2 inches, large enough to cover k1 max platform. May fit: Crealiity CR-10S Pro V2 and V3 CR-X CR-10 Smart Pro, Ender 3 Max or Max Neo, Formbt Troodoon 300, Gooofooo Novaa, and Anycubiic, NOT for Ender 3 S1 Plus. If you can accept 5-10mm,may fit: build plate 320x320, 310x320 build plate, Long LK1 Anycubiic MegaX, Kywooo Tycoonn Max, and Sovoll SV04 SV07 plus, artilery Sidewinde x1 x2 SW-X1 SW-X2 etc. Better to measure 3d printer hot bed size.
- 1. A must-have Build Plate Top Plate Only: !!!No Magentic Base Plate. Spare replacement metal heatbed cover for DIY your FDM 3d Printer stock bed: a single plate. The one smooth side and the one textured side are well double options, better than the original glass bed. The cutouts well match with Crealty K1 max ultrabase heated bed srews.
8.9Very Good
View offer on:
Show more
6
ZeberoxyzZeberoxyz 220x220mm/8.6x8.6inch Removable PEI Magnetic Hotbed Flexible Steel Platform with PEI Surface and Flex Magnetic Bottom for 3D Printer Heat Bed (220x220mm)
Main highlights- Upgrade 3D Printer Heatbed surface, flexible, removable, can stick to magnetics very well.High strength and heat resistance
- The size of PEI Sheet is 220x220mm/8.6x8.6inch,the overall thickness 2MM/0.08inch
- Magnetic base can stand the high temp at 130℃ without losing magnetism,Compatible with PLA ABS PETG TPU and other most filaments
- It is very easy to remove 3D model on printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier
- Brand new and good qualtiy
8.8Very Good
View offer on:
Show more
7
ZHENZQZHENZQ 3D Printing Magnetic Plate Sided Steel Bed with PEI+Magnetic Printing Hotbed Parts for 3 3D Printers
Main highlights- stainless steel and strong magnetic base, stick the magnetic base to your printing build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with facing up to print on. Please off the protective film before printing.
- sheet is applicable for 3D printer such as Ender-3 Ender-3 Ender-3 Ender-3S, Ender-3X, Ender-5, Ender-5 CR-20 CR-20 and similarly sized machines.
- When printing is let the spring steel sheet cool down enough (to around 40℃), then easily remove the prints. If the print is still stuck, just gently bend the steel plate.
- The magnetic plate are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with on the top.
- Flexible Printing bed has double-sided coating, both sides can be use,both side is textured.
8.7Very Good
View offer on:
Show more
8
IdeaFormer IR3IdeaFormer Coated Textured PEI Sheet + Smooth Carbon Fiber PET 220x220mm Flexible Sheet Hotbed Plate Work for Artillery Genius/Pro/MK2/MK2A/Anet A8/Anet A6 (Without Magnetic Base)
Main highlights- [Temperature resistance] The PET printing surface can withstand temperature of 120℃, while PEI printing surface can withstand temperature of 260℃. When the PET building surface has cooled, very easily bending the plate to take off the printed models.
- [Smooth PET+Textured PEI] PEI + PET double-sided printing platform in one plate. One side is a smooth PET surface,so the bottom of the printed model is smooth; the other side is PEI textured surface, then the bottom of the printed model is frosted. The PET surface sticks to the magnet well, it makes it easy to switch between smooth bottom surface and textured bottom surface.
- [Printable filaments] PET printing surface is suitable for filament PLA, PEI printing surface is suitable for filament like PLA/ ASA/ TPU/ PETG/ ABS etc
- [Packing] 1pc 220x220mm sheet. Note: it is one Single plate. One side smooth PET surface, one side textured PEI surface, two different printing experiences with one plate. There is no Magnetic base! The PET sheet needs to be used together with magnetic base, please make sure you already have one base on your 3d printer.
- [Compatibility] Compatible with: Anet A8 / Wanhao / Duplicator i3 / Monoprice Maker Ender-5 / Ender-5S
8.5Good
View offer on:
Show more
9
CrealityOfficial Creality Original Ender 3 S1 Pro Build Plate 235x235 Textured PEI Sheet Flexible Spring Steel Magnetic 3D Printer Build Plate for Ender 3/3 V2/3 Pro/5/5 Pro/3 Neo/3 V2 Neo 235x235mm
Main highlights- The PEI coating is characterized by its wear resistance and high-temperature durability. It is not easily scratched and is widely applicable to various printing materials. It provides reliable adhesion to the prints under both high and low temperatures, ensuring stable 3D printing without warping and significantly improving the success rate of prints.
- Official Original Build Plate - Offical Creality Ender 3 S1 Pro build plate, with dimensions of 235x235mm and a printing area of 220x220mm. Additionally, it is compatible with other FDM printers of the same size, such as Ender 3, Ender 3S, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Pro, Ender 3 Neo, Ender 3 V2, Ender 3 V2 Neo, Ender 3 V3, Ender 3 V3 KE, Ender 3 V3 SE, Ender 5, Ender 5S, Ender 5 S1, Ender 5 Pro, K1, K1C, KR, CR-10 SE, CR20, CP-01, etc.
- In order to save your costs and minimize unnecessary waste, this product only includes a PEI sheet without magnetic sheet. Therefore, it is suitable for users whose original magnetic sticker is still functional. If the original magnetic sticker is damaged, please consider purchasing the build plate kit that includes magnetic sheet.
- High Quality Spring Steel - Crafted from high-precision spring steel, our build plate ensures exceptional flatness, guaranteeing uniform layer adhesion during printing. Its elasticity eases prints removal by gently bending. The durable plate withstands heating, cooling cycles, and bending for extended use. Excellent thermal conductivity ensures even heat distribution, preventing object contraction or deformation, significantly enhancing 3D printing quality, convenience, and durability.
- Efficient Magnetic Design - Magnetic sheet base allows the build plate to be quickly and conveniently replaced without the need for additional tools or fixing methods. The inclusion of dual handles and positioning holes ensures that the build sheet can be accurately aligned in a single step during installation, simplifying the process and providing users with a more efficient printing experience.
8.4Good
View offer on:
Show more
10
BefenybayBefenybay Flexible Removable PEI Metal Sheet Bed Magnetic Heated Bed Build Surface 150x150mm for 3D Printer (150x150mm)
Main highlights- 【Size】150mm x 150mm,the overall thickness 2MM/0.08 inch
- 【Reuse for multiple prints】Just wipe down with isopropyl alcohol between prints for best results
- 【Flexible and Removable】Flexible, removable, can stick to magnetics very well. High strength and heat resistance
- 【Easy to Adhere and Remove】Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right offrepeatedly,resistance
- 【Aplication】ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
8.2Good
View offer on:
Show more
Similar products on Amazon
