3 Axis Servo Cnc Kits of 2025
Best Choice1
SHIHUANISHIHUANI Standalone Motion Controller DDCSV4.1 3/4 Axis CNC Offline Standalone Motion Controller Offline Controller Support CNC Controller Interface Replace Mach-3(4 axis KIT)
Main highlights- 4.【convenient operation】:The controller usually adopts humanized interface design so that the operator can get started quickly. Through the touch screen or keyboard input commands, intuitively set the processing parameters and programs. Some advanced controllers also support graphical programming, greatly reducing the difficulty of programming.
- 3.【Features】CNC controller can realize high-precision machining. It uses advanced digital control technology to precisely control the position and speed of the machining process to ensure the accuracy and consistency of the machining dimensions. In addition, it can further improve the machining accuracy through error compensation and other functions.
- 2.【Applications】can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machinelathe machine and cutters are just a few examples.
- 1.【Brief introduction】The motion controller This provides high control precision for stepper motors and servo motors.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
RATTMMOTORRATTMMOTOR CNC 4th-Axis A-Axis Rotation-Axis Kit K11-130mm 3 Jaw Chuck Dividing Head 100mm Tailstock Reducing Ratio 4:1 (+Nema34 Closed Loop Servo Motor+2HSS86 Driver)
Main highlights- 【MT2 Tailstock 】Centre height: 100mm; Telescopic stroke: 50mm; Base length: 120mm; Base material: aluminium alloy; Tip: Use Morse 2 tip; Accessories: with axial locking spanner.
- 【K11-130mm three-jaw centring chucks】Maximum input torque: 100N.m; Limit speed: 3000r/min; Maximum static clamping force: 17KN; Positive jaw clamp: 3-40mm; ; Positive jaw support: 40-130mm; Reverse Jaw Clamp: 40-120mm; Mounting screw: M8.
- 【CNC 4th axis】Product Model: 5M-H100-4-130A(B); Chuck type: K11-130mm 3-jaw centring chuck; Centre height: 100MM; Total height: 165MM; Through-hole diameter: 30MM; Angle: 0.45 degree/step; Deceleration ratio: 4:1 (synchronous belt deceleration mode); Stepping motor: 2-phase 4-wire 86 stepping motor (current 4.5A); Synchronous belt: 5M-450 (width 15MM).
- 【4.5N.m Closed Loop Servo Motor】Size:86x86x82mm; Current :6.0A; Phase:2; Step Angle(degrees):1.8 degree; Lead wire:4pcs; Holding Torque:450Ncm; Resistance:0.44±10%Ω; Inductance:3.7±20%mH; Insulation resistance:100MOhm(500V DC); Insulation Class:B.
- 【2HHS86 Servo Motor Driver 】Voltage range: AC24-70V or DC30-100V; Peak current :Peak 8.0A; Logic input current:7-20mA; Frequency:0-200KHz; Encoder lines:1000; Insulation resistance:>=500MΩ; Operating temprature:0~50℃; Virbration:5.9m/s2Max.
9.8Exceptional
View offer on:
Show more
3
TOSEASTARSCNC Controller Kit 3 Axis with Closed Loop Stepper Motor Kit Nema 34 8.5Nm 1000 Line Encoder Steping Motors DSP Easy Servo with 18-110VDC Driver, 400W 60V Power Supply, Mach3 Control Card
Main highlights- [Premium Materials]: The Nema 34 stepper motor is meticulously crafted using high-quality materials, ensuring optimal performance and durability for any task. The high torque of the 86 stepper motor driver kit not only provides substantial force for managing large or heavy loads but also ensures precise positional control.
- [Parameters]: CLOSED LOOP STEPPER MOTOR: Phase: 2PH; Rated Current: 6A; Step angle: 1.8 degree; Phase Resistance: 0.45Ω; Phase Inductance: 4mH; Holding Togque: 8.5Nm (1203.7oz.in); Rated Speed: 1000RPM; Encoder: 1000line; Rotor Inertia: 2700g.cm². CLOSED LOOP STEPPER DRIVER: Output Peak Current: 0~8A; Input Voltage: +18~110VDC, 18~80VAC; Pulse Input Frequency: 0~200kHz; Micro-stepping driver: 200~51200ppr.
- [Dimensions]: NEMA 34 closed loop stepper motor: 86x86x118mm / 3.39x3.39x4.65inch, Shaft Diameter: Φ 14mm, Shaft Length: 25mm, 2 phase, 4 wires: closed loop step motor Driver: 150x97x52mm / 5.91x3.82x2.05inch. 400W 60V Power Supply: 215*115*50 mm / 8.46*4.52*1.97 inch.
- Parameters: Power Supply: Power:400W; Output Voltage(DC): 60VDC; Input Voltage (AC): 110V/220V(+-10%); Output Current: 6.6A; Safety Compliance:CCC/ FCC / CE. Mach3: Type: BL-UsbMach-100-V3.25; System: windows XP,WIN7,WIN8,WIN10: 64Bits; MCU: 32Bits STM; MCU Freg.: 1-100KHZ/axis; Voltage: DC 12V-24V; Input: 5 optocoupler isolation; Output: Two 24v; Two 5v; Handwheel Port: 15P; Axis: XY,Z,A,B,C(free 5axis).
- High Efficiency: Our nema 34 closed loop stepper motor can suitable for all kinds of small and medium-sized automationequipment and instruments, such as: engraving machines, cuttingmachines, laser machines, plotters, CNC machine tools, automaticassembly equipment, electronic processing equipment, textile andclothing equipment, etc.The application effect is better in the equipment with low noise.
9.6Exceptional
View offer on:
Show more
4
RATTMMOTORRATTMMOTOR CNC Controller Kit, 3 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
Main highlights- 【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- 【Support Forward and Reverse Control Stepper Motor Driver】42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
- 【Stable output 24V DC power supply】Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- 【Multi-function control card】With support for automatic home return, automatic tool setting, emergency stop input, limit switch access, spindle control (PWM mode and Him electrical mode), handwheel interface and other functions. Provide up to 12-way digital signal input, 4-way with optocoupler digital signal input and isolated relay output. Strong anti-interference and high reliability.
- 【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- 【Low Noise/High Torque Hybrid Stepper Motor】23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- 【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "Pul+" connects to control card's XP+ pin , Driver's "DIR+" connects to control card's XD+ pin , Driver's " PUL- " pin and " DIR- " connection to USB Mach3 control card's " GND ".
9.5Excellent
View offer on:
Show more
5
TOSEASTARSCNC Controller Kit 3 Axis with Nema 23 Closed Loop Stepper Motor 3 Nm 428 oz.in 1000 Line Encoder Stepper Motor, 24-80V DC Steping Driver, 350W Power Supply Mach3 Control Card for Engraving
Main highlights- Stable output 24V DC power supply: Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage.
- Parameter of Closed Loop Stepper Motor Driver: Type: DSP Closed loop stepper drive; Maximum peak current: 13A; Impulse response frequency: 200KHz; Input Voltage: 24-80VDC; Micro-stepping driver: 200~25600ppr; Compatible : 4.5~28V signal; Signal input: Support PUL/DIR and CW/CCW modes (difference). This motor driver kit fits all types of machine load conditions without adjusting the gain parameters.
- Items in Kit: 3 Pcs 3Nm Closed loop stepper motor with 1000line encoder. 3 Pcs Nema 23 Closed loop stepper motor driver. 1 x 350W Power Supply and 1 x Mach3 Card.
- Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability. It supports over-current protection, over-voltage protection, position outside the tolerance protection.
- Closed Loop Stepper Motor: Holding Torque: 3N.m/300Ncm; Current: 3A; Phase: 2; Motor Length: 57x57x112 mm / 2.24*2.24*4.41 inch; Step Angle: 1.8 degree; Motor Lead Wire: 4-wire; Encoder: 1000 lines; Inductance: 3.5 mH; Resistance: 0.8 (ohm). Stepper motor closed loop system,never lose step.
9.4Excellent
View offer on:
Show more
6
RATTMMOTORRATTMMOTOR CNC Controller Kit, 4 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
Main highlights- 【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- 【Support Forward and Reverse Control Stepper Motor Driver】42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
- 【Stable output 24V DC power supply】Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- 【Multi-function control card】With support for automatic home return, automatic tool setting, emergency stop input, limit switch access, spindle control (PWM mode and Him electrical mode), handwheel interface and other functions. Provide up to 12-way digital signal input, 4-way with optocoupler digital signal input and isolated relay output. Strong anti-interference and high reliability.
- 【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- 【Low Noise/High Torque Hybrid Stepper Motor】23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- 【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "Pul+" connects to control card's XP+ pin , Driver's "DIR+" connects to control card's XD+ pin , Driver's " PUL- " pin and " DIR- " connection to USB Mach3 control card's " GND ".
9.3Excellent
View offer on:
Show more
7
RATTMMOTORRATTMMOTOR 3 Axis USB CNC Controller Kit,Nema23 Stepper Motor 425oz-in 3A 112mm,FMD2740C Driver 4A,USB Interface Card USBCNC Control Breakout Board,36V Power Supply CNC Router Machine Kit
Main highlights- Feature of the controller board: X/Y/Z/A axis stepper motor control signal output, the definition is CK+CK-DIR+DIR-;Manual speed control interface (GND,JOG,VCC);Limit input interface;Spindle control output;MIST/FLOOD/SPINDLE control relay output;External pause and reset interface
- FMD2740C Driver: Input Voltage: DC18-50V; Current: 1.4A-5.6A;Subdivision precision: 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optional
- 400W 36V 11A DC switching power supply: Please flip the side input voltage selector switch to choose the input power supply,support input voltage : AC110V-120V or AC220V-240V
- 4 Axis USB CNC Breakout Board: Card input voltage: 15-36VDC; With remote hand control; Support computer system: Support Win XP/7/8/10 system; USB port,only support USBCNC Software,with a CD,you can download the manual,USBCNC software and registration code; Support limit switch; 0-10V speed control signal,external pause and reset interface etc
- 23HS2430B Nema23 Stepper Motor: Phase: 2 Phase; Type: Hybrid; Step Angle: 1.8degree; Current: 3.0A; Holding torque: 425oz-in 280Ncm; Shaft: Dual Shaft; Shat diameter: 8mm; 4 Lead Wires; Wirings: A+ to Red / A- to Green / B+ to Yellow / B- to Blue Motor Size: 57x57x112mm
9.1Excellent
View offer on:
Show more
8
RATTMMOTORRATTMMOTOR 1000W 220V Servo Motor Kit, Servo Motor with Servo Motor Driver and Brake Encoder Cable, CNC Controller Kit for CNC Engraver Milling Machine/Robot (1000W Without Brake)
Main highlights- 【Triple Overload/Powerful Motor】The motors are made of high quality materials with 3 times overload capacity, built-in disturbance torque observer, extremely strong resistance to external disturbances and stable operation. The motor also has features such as: high torque, no lost step, low noise, fast response, small size, high controllability, and has been operated.
- 【Motor parameters】Model: A2M-80SV03230; With brake: No; Power: 1000W; Number of poles: 5 pairs; Rated power supply: 220V; Rated speed: 3000r/min; Peak speed: 6000r/min; Rated torque: 3.8 N.m; Max torque: 11.4 N.m; Rated current: 4.8A; Max current: 14.4A; Ender Resolution: 10000ppr; Protection structure: IP65; Impact strength: 98m/s²; Vibration resistance: 49m/s².
- 【Driver Parameters】Model: S2SVD20; Maximum current: 20A; Input voltage: AC220V (50/60Hz); Cooling method: Heat dissipation air cooling; Encoder type: 17 bit magnetic encoder.
- 【Driver Multiple Functions】The driver adopts advanced algorithm, low-speed operation is more stable, at the same time, the high-performance encoder ensures the accuracy of the motor; Reserved multiple IO function interface, arbitrary combination to meet the functional needs of different occasions; support RS-232, RS-485 interface, modbus communication protocol, can be connected to the PC, PLC and other host computer equipment.
- 【Application Areas】Suitable for a variety of automation equipment and instruments, such as screw machines, automatic equipment, medical equipment, semiconductor equipment, engraving equipment, measuring equipment, AGV carts, etc.
- 【AC Servo Features】Three types of command pulse input, i.e. command direction and pulse input, clockwise/counterclockwise pulse input, and quadrature pulse input with 90 degree phase difference. Position control, speed control, torque control, and extension control can be converted through Modbus communication to meet common applications. The display mode can be switched between three modes: monitor mode, auxiliary mode, and user parameter mode.
8.9Very Good
View offer on:
Show more
9
RATTMMOTORRATTMMOTOR CNC Controller Kit, 3 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Blue Breakout Board, 24V Power Supply
Why we love it
Easy to connect and use.
High torque with low noise.
Versatile for various CNC applications.
8.8Very Good
View offer on:
Show more
10
CNCTOPBAOS22% OffCNCTOPBAOS 1KW AC Servo Motor Kit,220V 1000W 3000rpm 3.18N.m Servo motor and Driver CNC Controller Kit,17 bit Encoder RS485 for CNC Milling Lathe Cutting Engraving Machine/Robot
Main highlights- Motor Parameters:Model 80F-0330GDL; Power: 1000 W; Poles: 5 pairs; Voltage: 220 V; Rated speed: 3000 r/min; Peak speed:6000 r/min ;Rated torque: 3.18 N.m; Instantaneous max torque:9.54 N.m; Rated current: 5.8 A; Insulation class: F; Waterproof grade: IP65
- Functions: Under voltage,over voltage,over load,over current,encoder exception,position error etc; Position control, speed control, torque control; Modbus communication,standard RS485 communication function,realize upload and download network control
- Features:All input and output ports can be freely defined and have strong applicability; The internal simple PLC function, in some simple control occasions, PLC can be completely omitted, and a lower cost solution can be realized
- Driver parameters: Model SDF08NK8X; Max current: 10.5 A; Voltage: AC170-253V 1 or 3 phase input; Cooling method: Heat dissipation air cooling; Control mode: SVPWM; Operating temperature: 32 - 131℉; Storage temperature: -68 - 176℉; Protection level: IP54
- 17bit Encoder: Matching with 17-bit single-turn absolute value optical encoder, 5 pairs of poles,to ensure the accuracy of 1/5120000; A variety of intelligent monitoring functions and operation panels are convenient for users to debug and diagnose
8.5Good
View offer on:
Show more
Similar products on Amazon
