3 Axis Cnc Servo Motor Kits of 2025
Best Choice1
TGLGTQPXNema34 Motor 3-axis CNC kit Closed Loop 12N 8N 4N 86EH118A6001+CL86 Driver 48V 360W Power Hybrid servo Motor(8N 86EH118-CL86 3kit)
Main highlights- Drives
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
NOVKMJVZNOVKMJVZ Nema34 Motor 3-axis CNC kit Closed Loop 12N 8N 4N 86EH118A6001+CL86 Driver 48V 360W Power Hybrid servo Motor(8N 86EH118-CL86 3kit)
Main highlights- Drivers
9.7Exceptional
View offer on:
Show more
3
RATTMMOTORRATTMMOTOR 3 Axis Nema23 Stepper Motor Kit,425oz-in 3A 112mm,DM556S Motor Driver,4 Axis USB Mach3 Controller Board Motion Control Card 36V CNC Kit for CNC Router Milling Machine
Main highlights- Feature of Driver:Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise
- DM556S Stepper Motor Driver: Current: 1.0A-6.0A ; Driver microstep: 200-51200 subdivision,adopts 32-bit DSP digital processing technology ; Input Voltage: 20-50V DC
- 400W 36V 9.7A DC switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC; 75W 24V DC Switching power supply Input voltage: 100-240V AC; Output voltage: 24V; This 24V power supply is used to power the 4 axis usb mach3 control card
- 4 Axis USB Mach3 Control Board: USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed; As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8/10
- 23HS2430B Nema23 Stepper Motor: Phase: 2 Phase; Type: Hybrid; Step Angle: 1.8degree; Current: 3.0A; Holding torque: 425oz-in 280Ncm; Shaft: Dual Shaft; Shat diameter: 8mm; 4 Lead Wires; Wirings: A+ to Red / A- to Green / B+ to Yellow / B- to Blue Motor Size: 57x57x112mm
9.5Excellent
View offer on:
Show more
4
RATTMMOTORRATTMMOTOR CNC Controller Kit, 3 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
Main highlights- 【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- 【Support Forward and Reverse Control Stepper Motor Driver】42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
- 【Stable output 24V DC power supply】Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- 【Multi-function control card】With support for automatic home return, automatic tool setting, emergency stop input, limit switch access, spindle control (PWM mode and Him electrical mode), handwheel interface and other functions. Provide up to 12-way digital signal input, 4-way with optocoupler digital signal input and isolated relay output. Strong anti-interference and high reliability.
- 【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- 【Low Noise/High Torque Hybrid Stepper Motor】23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- 【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "Pul+" connects to control card's XP+ pin , Driver's "DIR+" connects to control card's XD+ pin , Driver's " PUL- " pin and " DIR- " connection to USB Mach3 control card's " GND ".
9.4Excellent
View offer on:
Show more
5
TOSEASTARSCNC Controller Kit 3 Axis with Nema 23 Closed Loop Stepper Motor Kit DSP Easy Servo 1.2 Nm 1000 Line Encoder Step Motor 1000rpm, 24-80V DC Steping Driver 350W Power Supply Mach3 Control Card
Main highlights- Stable output 24V DC power supply: Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage.
- Specifications of Closed Loop Stepper Motor: Holding Torque: 1.2N.m; Current: 3A; Phase: 2; Motor Length: 57x57x54 mm / 2.24*2.24*2.2 inch; Step Angle: 1.8 degree; Motor Lead Wire: 4-wire; Encoder: 1000 lines; Inductance: 3.5 mH; Resistance: 0.93 (ohm).
- Parameter of Motor Driver: Type: DSP Closed loop stepper drive; Maximum peak current: 13A; Impulse response frequency: 200KHz; Input Voltage: 24-80VDC; Micro-stepping driver: 200~25600ppr; Compatible : 4.5~28V signal; Signal input: Support PUL/DIR and CW/CCW modes (difference). This motor driver kit fits all types of machine load conditions without adjusting the gain parameters.
- Items in Kit: 3 Pcs 1.2Nm Closed loop stepper motor with 1000line encoder. 3 Pc Nema 23 Closed loop stepper motor driver. 1 x 350W Power Supply and 1 x USB Mach3 Card. This is a professional 3d printer DIY kit made of high premium materials.
- Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability. Nema 23 closed loop stepper motor kit can be applied to all kinds small and medium-sized automation equipment and instrument,such as 3D printer, CNC machine, milling machine, carving machine, special industrial sewing machine, stripping machine, marking machine, graph plotter, cnc machine, automatic assembly equipment,automation application and so on.
9.3Excellent
View offer on:
Show more
6
RATTMMOTORRATTMMOTOR CNC Controller Kit, 4 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
Main highlights- 【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- 【Support Forward and Reverse Control Stepper Motor Driver】42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
- 【Stable output 24V DC power supply】Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- 【Multi-function control card】With support for automatic home return, automatic tool setting, emergency stop input, limit switch access, spindle control (PWM mode and Him electrical mode), handwheel interface and other functions. Provide up to 12-way digital signal input, 4-way with optocoupler digital signal input and isolated relay output. Strong anti-interference and high reliability.
- 【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- 【Low Noise/High Torque Hybrid Stepper Motor】23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- 【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "Pul+" connects to control card's XP+ pin , Driver's "DIR+" connects to control card's XD+ pin , Driver's " PUL- " pin and " DIR- " connection to USB Mach3 control card's " GND ".
9.2Excellent
View offer on:
Show more
7
RATTMMOTORRATTMMOTOR YPMC-1000W 220V Servo Motor Kit, Servo Motor with Servo Motor Driver, CNC Controller Kit for CNC Engraver Milling Machine/Robot (Without Brake)
Main highlights- 【Triple Overload/Powerful Motor】The motors are made of high quality materials with 3 times overload capacity, built-in disturbance torque observer, extremely strong resistance to external disturbances and stable operation. The motor also has features such as: high torque, no lost step, low noise, fast response, small size, high controllability, and has been operated.
- 【Motor parameters】Model: A2M-80SV03230; With brake: No; Power: 1000W; Number of poles: 5 pairs; Rated power supply: 220V; Rated speed: 3000r/min; Peak speed: 6000r/min; Rated torque: 3.8 N.m; Max torque: 11.4 N.m; Rated current: 4.8A; Max current: 14.4A; Ender Resolution: 10000ppr; Protection structure: IP65; Impact strength: 98m/s²; Vibration resistance: 49m/s².
- 【Driver Parameters】Model: S2SVD20; Maximum current: 20A; Input voltage: AC220V (50/60Hz); Cooling method: Heat dissipation air cooling; Encoder type: 17 bit magnetic encoder. ( Note: Controllers with CN ports need to be customized separately: support RS-232, RS-485 interface, modbus communication protocol, can be connected to the PC, PLC and other host computer equipment. )
- 【Driver Multiple Functions】The driver adopts advanced algorithm, low-speed operation is more stable, at the same time, the high-performance encoder ensures the accuracy of the motor; Reserved multiple IO function interface, arbitrary combination to meet the functional needs of different occasions.
- 【Application Areas】Suitable for a variety of automation equipment and instruments, such as screw machines, automatic equipment, medical equipment, semiconductor equipment, engraving equipment, measuring equipment, AGV carts, etc.
- 【AC Servo Features】Three types of command pulse input, i.e. command direction and pulse input, clockwise/counterclockwise pulse input, and quadrature pulse input with 90 degree phase difference. Position control, speed control, torque control, and extension control can be converted through Modbus communication to meet common applications. The display mode can be switched between three modes: monitor mode, auxiliary mode, and user parameter mode.
9.1Excellent
View offer on:
Show more
8
RATTMMOTORRATTMMOTOR YPMC-750W 110V Servo Motor Kit, Servo Motor with Servo Motor Driver CNC Controller Kit for CNC Engraver Milling Machine/Robot (Without Brake)
Main highlights- 【Triple Overload/Powerful Motor】The motors are made of high quality materials with 3 times overload capacity, built-in disturbance torque observer, extremely strong resistance to external disturbances and stable operation. The motor also has features such as: high torque, no lost step, low noise, fast response, small size, high controllability, and has been operated.
- 【Motor parameters】Model: A2M110-80SV02430; With brake: No; Power: 750W; Number of poles: 5 pairs; Rated power supply: 110V; Rated speed: 2500r/min; Peak speed: 3000r/min; Rated torque: 2.4N.m; Max torque: 7.2 N.m; Ender Resolution: 10000ppr; Protection structure: IP65; Impact strength: 98m/s²; Vibration resistance: 49m/s².
- 【Driver Parameters】Model: S2SVD15-110; Input voltage: AC110V (50/60Hz); Cooling method: Heat dissipation air cooling; Encoder type: 17 bit magnetic encoder. ( Note: Controllers with CN ports need to be customized separately: support RS-232, RS-485 interface, modbus communication protocol, can be connected to the PC, PLC and other host computer equipment. )
- 【Driver Multiple Functions】The driver adopts advanced algorithm, low-speed operation is more stable, at the same time, the high-performance encoder ensures the accuracy of the motor; Reserved multiple IO function interface, arbitrary combination to meet the functional needs of different occasions.
- 【Application Areas】Suitable for a variety of automation equipment and instruments, such as screw machines, automatic equipment, medical equipment, semiconductor equipment, engraving equipment, measuring equipment, AGV carts, etc.
- 【AC Servo Features】Three types of command pulse input, i.e. command direction and pulse input, clockwise/counterclockwise pulse input, and quadrature pulse input with 90 degree phase difference. Position control, speed control, torque control, and extension control can be converted through Modbus communication to meet common applications. The display mode can be switched between three modes: monitor mode, auxiliary mode, and user parameter mode.
8.9Very Good
View offer on:
Show more
9
NOVKMJVZNOVKMJVZ 3 axis CNC kit Stepper Motor Closed Loop 12N 8N 4N 86EH118A6001+CL86 Driver 48V 360W Power Supply Hybrid Stepper servo Motor(8N 86EH118-CL86,1 kit)
Main highlights- Drivers
8.8Very Good
View offer on:
Show more
10
TGLGTQPXTGLGTQPX 3 axis CNC kit Stepper Motor Closed Loop 12N 8N 4N 86EH118A6001+CL86 Driver 48V 360W Power Supply Hybrid Stepper servo Motor(4N 86EH80-CL86,1 kit)
Main highlights- Drives
8.7Very Good
View offer on:
Show more
Similar products on Amazon
