10 Best 18650 Power Bank Diy 10pcs In The Us - Black Friday 2024
- Curious about how we select the top products for you? Explore How It Works
Charging Bank Solder Free Kit with LED Flashlight, Plastic Power Bank Box for 21x18650 Battery, DIY Charging Case Accessory
Main highlights- The shell is fixed with screws and can be disassembled and batteries replaced at any time, unlike the general non-detachable DIY cases.
- Power display/power button, 4 * USB output ports + 1 * MICRO interface + 1 * compatible for iOS interface + Type-C interface.
- Handle design, easy to carry, suitable for home use, outdoor enthusiasts, DIY enthusiasts, etc. Easy to operate and easy to disassemble.
- Equipped with 9 LED beads at the bottom, it can be illuminated in three modes. Press and hold the button for 2 seconds to turn it on/off, and then click again to switch between slow/fast/constant light modes.
- Can accommodate 21pcs 18650 batteries (flat top). (Batteries not included)
LIJIANI Battery Charger Case,Portable DIY Power Bank Box with LCD Display 2 USB Output,Micro and Type c Input, Smart Charger for 3.7v Li-ion Rechargeable Battery (Battery Not Included)
Main highlights- Multifunctional charging case: 4 battery(0.7 inches in diameter - 2.56 inches long) charging case, LCD display battery voltage and current value, the remaining battery power. Can easily remove the battery to power other devices
- Mobile power function: filled with batteries, it is a 10000 mah rechargeable treasure (choose 4 2500 mah batteries), if you choose 3500 mah / a battery, it is 14000 mah rechargeable treasure. Not recommended, different sizes of batteries loaded into use at the same time
- Dual-port input : (MICRO and TYPE-C) 5V-2A, two USB output, 5V-2A, long press the switch can open the flashlight function
- Concern: This product does not include batteries, unfamiliar with Cylindrical lithium batteries, people without DIY spirit, please be careful to buy
- Bad battery detection function: if you load a bad battery, or the battery positive and negative poles are installed backwards, no battery symbols on the LCD display, only normal batteries appear battery symbols
UMLIFE 4pcs 18650 Charging Board ,Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Main highlights- overcharge protection, overdischarge protection, short circuit protection, constant current.Suggest Working Conditions:Max continuous charge/discharge current 1.5/2.4A,working temperature: -5~45℃.
- Size: 6.5 * 2.5 * 0.1cm;
- Dual Output Current: 5V 2.4A;Constant Current: 2.4A;
- Charging cable: support three USB data cable charging, including for Iphone and Android.
- Attention : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out
LHIABNN DIY Power Bank - Make Your Own External Battery Pack,2 Output 3 Input (Mirco,Type C,Lighting) - Battery Not Include (Black)
Main highlights- Size: 17x8x2.3cm
- Packing: Only 1 Pieces Plastic Case
- Material: Plastic
- Compact and lightweight design for easy carrying; Easy to install and uninstall; Convenient take and use.
- Any questions pls feel free to contact us.
LHIABNN DIY Power Bank Box Flat Head Battery Charger Outer Case,2 USB Output Ports Plastic Shell Box with LCD Display,Micro/Phone/Type-c Input Port Power Bank Case (Black)
Main highlights- 【Widely Use】: Compatible For Phone 11 pro max X XR XS 8 7 6 plus/6/5S,for pad,for Samsung Galaxy S8 S7 S2/S3/S4, Note 2/3/4, HTC, for Sony, Xiaomi Motorola and other cellphones. Application - Suitable for various models of mobile phones that support wireless charging fuction.
- 【LCD Display】: Accurate display of power, keep the battery status at any time.Power bank and rechargeable 18650 battery charger. Plug and Play, power output using the USB port, plug the data cable to achieve portable, ready to charge.
- 【Intelligent 18650 Battery Charger】: Compatible with 18650 Flat head lithium battery (69mm length). Each battery slot is individual charging and detection. It automatically terminates charging when the batteries are full charged.(NOTE: Please notice the positive and negative poles)
- 【Easy to Use】: Compact and lightweight design for easy carrying; Easy to install and uninstall; Convenient take and use.
- 【DIY Power Bank】: Large capacity,8 x 18650 batteries (batteries not included). Dual USB power bank, two devices can be charged at same time.Three input ports,any usb cable can charge the power bank.
XBERSTAR 18650 Power Bank case,Li-Ion Battery Storage Box -18650 Holder for Uninterrupted Power Supply UPS DIY Battery Special Plastic DIY kit (set1)
Main highlights- You will get;3S 40A BMS -US Charger -18650 Li-Ion Battery Holder -Pure Nickel Strip(not include batteries )
- Installation: Easy and simple to use and operate, no other tools needed to install.Install the battery according to the positive and negative sides on the circuit board. Be careful not to reverse it.
- High quality battery holder case with wire leads for easy soldering and connecting.Each battery holder comes with a case cover for keeping the battery in place
- Attention: There is a specific product description on the picture, please read it in detail.
- Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
Abovehill 18650 Mobile Battery Box with LED Light and Battery Indicator,Dual USB and DC Outputs for iPhone and Android Phones
Main highlights- 5.It is equipped with 4 LED lights to display the current battery margin. Also equipped with a 5mm LED emergency light, you can bring light to you in the wild or in the dark. A variety of uses, let you like it more.
- 4.The charging and discharging part of the main control chip adopts a synchronous rectification circuit, which improves the conversion efficiency and greatly reduces the heat generation. Output current limit protection, when the rated output current is exceeded, the output voltage is automatically reduced to protect the circuit.
- 3.It is also equipped with a separate DC output port that can be adjusted with four gear positions (3.8/6/9/12V). The USB port and DC port can be used at the same time without mutual interference.
- 2.It comes with two USB output ports for Apple and Android phones. Resolved compatibility issues for charging most phones. There is an image label at the output port, which is convenient for selecting the correct port to replenish the battery in time.
- 1.It is an 18650 battery case and a mobile power box. It requires to install 6 18650 rechargeable batteries. The installed battery can be charged directly via the charger. Input voltage is 5V, current is 1A-2.1A
18650 Charger Box USB Mobile Holder C16PD Version Power for Shell Charger Box with Lighting Power Kit 18650 DIY Removable Welding-Free 16-Section 18650 Power Kit DIY Mobile (Black)
Main highlights- Weight: about 206 grams without (for case + mainboard + spring basket + lens + lanyard).
- Size: thickness 44mm width 80mm length 186mm(internal dimensions remove spring: thickness 36mm width 72mm length 146mm).
- Cell: 18650 type flat for head x 16 (free welding).
- C16-PD with light: output/input power: 5V-3A 9V-2A 12V-1.5A.
- Application: Good performance, convenient and practical, suitable for home and professional use.
BUDI 20W Portable 18650 Battery Fast Charger, Suitable for 3.7V Lithium-ion 18650 Rechargeable Battery 20W Dual Type-C Fast Output(Not Including Battery)
Main highlights- What You Will Get:18650 charger_X1 USB-C data cable_X1 thimble_X1 lanyard_X1 Note: Please confirm the positive and negative poles of the battery (+ -), do not mix with old batteries or different types of batteries to avoid causing The battery leaks or explodes. This product does not include 18650 battery TFSIM Nano card.
- USB-C PD Charging:USB-C PD battery charger can help travelers charge lithium-ion batteries anytime and anywhere, especially if you don't have enough sockets, you can even plug it into your laptop, computer, car charger, mobile phone adapter, or other USB output device for charging.Body size: L174.1XW51XH29.5 (mm) Body weight ~152g
- USB-C PD 18650 Battery Charger:USB-C PD powered universal smart 18650 battery charger with four independent charging slots, PD USB-C input/output: 5V=3A 9V=2.22A 12V-1.67AOC USB-C output : 5V=3A 9V=2A 12V=1.5AD Dual USB-C Output ID: 5V=3A supports 4 slots of simultaneous independent charging without affecting
- Safety Guaranteed : Equipped with special charge and discharge management circuit. The charger has multiple safety protection settings that can effectively prevent battery damage from reverse connection, short circuit, overcharge, over-discharge, and over-current, allowing users to use the product without any safety concerns.
- Reversible output current charger: It can be used as a 20W Reversible output current charger after putting in 4 18650 batteries, and you can replace the exhausted batteries with brand new 18650 batteries at any time to ensure continuous power supply for your device. Supports Quick Charge 3.0 technology, suitable for charging QC3.0 certified cell phones and tablets, charging speed can be increased by 4 times. Quickly charges QC3.0 smartphones up to 80% in 35 minutes.
Black Friday Sale
Deal ends in
HrsMinSec