10 Best 18650 Mobile Charging In The Us - Black Friday 2024
Universal Smart 2 Slots 18650 Battery Charger Set,4 Pack 3400 mah Rechargeable Button Top Batteries Battery for LED Flashlight Headlamp, Remote Controls,etc.
Main highlights- 【Wide application】3400mAh 18650 Rechargeable battery large capacity,Which can be widely used for electronic devices, such as LED flashlights, emergency lights, portable devices, headlights, toys, remote controls, etc. These are Button Top batteries,Please check your devices carefully before purchasing.
- 【What you get】 1 x Universal 2 slots battery charger, 4 x 18650 rechargeable batteries (3400mAh), 1 x 2.1 USB charging cable. All products will be checked one by one before being sent to Amazon warehouse, If you find bump damage product, please contact.
- 【Universal Compatibility】Universal smart charger compatible with almost all cylindrical rechargeable batteries,Capable of charging 2 batteries simultaneously and each of the two battery slots monitors and charges independently, The USB cable can be charged, low-voltage,can be connected to cell phone chargers, computers, rechargeable batteries,etc.for charging.
- 【Safety Performance】 Integrated high-performance protected circuit automatically protects against overcharge,Stop charging automatically if the temperature of charger or battery gets too high when charging.Two sets of LED indicators show independently when charging,Red light is on when charging, green light is on when full, intelligent full self-stop.
- 【Long lasting performance】: The anti-corrosion shell can effectively protect the battery and extend its service life. Preventing waste of non-rechargeable battery. No memory effect, the large battery capacity, allows you to worry no more about your device without power.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
UMLIFEUMLIFE 4pcs 18650 Charging Board ，Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Main highlights- overcharge protection, overdischarge protection, short circuit protection, constant current.Suggest Working Conditions:Max continuous charge/discharge current 1.5/2.4A,working temperature: -5～45℃.
- Size: 6.5 * 2.5 * 0.1cm;
- Dual Output Current: 5V 2.4A；Constant Current: 2.4A;
- Charging cable: support three USB data cable charging, including for Iphone and Android.
- Attention : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out
9.8Exceptional
View offer on:
Show more
3
AEDIKOAEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board
Main highlights- Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection
- NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s; if the Load is Greater than 50MA, the Output Will be Automatically Turned On
- MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground)
- Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets
- 2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V; Charging Current: 0-2.1A;Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended)
9.7Exceptional
View offer on:
Show more
4
BYNNIX18650 Charger Box USB Mobile Holder C16PD Version Power for Shell Charger Box with Lighting Power Kit 18650 DIY Removable Welding-Free 16-Section 18650 Power Kit DIY Mobile (Black)
Main highlights- Weight: about 206 grams without (for case + mainboard + spring basket + lens + lanyard).
- Size: thickness 44mm width 80mm length 186mm(internal dimensions remove spring: thickness 36mm width 72mm length 146mm).
- Cell: 18650 type flat for head x 16 (free welding).
- C16-PD with light: output/input power: 5V-3A 9V-2A 12V-1.5A.
- Application: Good performance, convenient and practical, suitable for home and professional use.
9.6Exceptional
View offer on:
Show more
5
UMLIFE8PCS 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Supply Charge and Discharge Protection Converter Protection PCB Board Module
8.9 Simple to use8.4 Battery Duration8.0 DurabilityWhy we love it
Versatile for various charging and power supply needs.
Compact size and high efficiency up to 96%.
Reliable lithium battery protection features.
9.3Excellent
View offer on:
Show more
6
MakerFocus6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module
Main highlights- ★ The first time the load is connected, the output is automatically turned on. If the load is less than 50mA, the output will be automatically turned off after 30 seconds; if the load is greater than 50mA, the output will be automatically turned on
- ★ MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
- ★ In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- ★ Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- ★ 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
9.2Excellent
View offer on:
Show more
7
QCCANQCCAN 3pcs Lithium Battery Charger Board LED Dual USB 5V 2.4A Micro/Type-C USB Mobile Power Bank 18650 Charging Module Circuit Protection
Main highlights- The module is a portable backup power supply with an input that matches the 5.0V adapter to charge the internal battery. Use built-in battery for portable device to provide 5.0V/3.0A USB2.0 supply output for external devices.
- Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!
- Dual output current: 5V 2.4A; Input voltage B+ to B-: 3.0 - 4.2V; Protection: overcharge protection, overdischarge protection, short circuit protection, constant current.
- Charging cable: support three type of USB Cables for iPhone Lightning & for Android Type-C Micro USB
- Button function: Press and hold the button after standby, the LED digital screen displays the power.
9.1Excellent
View offer on:
Show more
8
abovehillAbovehill 18650 Mobile Battery Box with LED Light and Battery Indicator,Dual USB and DC Outputs for iPhone and Android Phones
Main highlights- 5.It is equipped with 4 LED lights to display the current battery margin. Also equipped with a 5mm LED emergency light, you can bring light to you in the wild or in the dark. A variety of uses, let you like it more.
- 4.The charging and discharging part of the main control chip adopts a synchronous rectification circuit, which improves the conversion efficiency and greatly reduces the heat generation. Output current limit protection, when the rated output current is exceeded, the output voltage is automatically reduced to protect the circuit.
- 3.It is also equipped with a separate DC output port that can be adjusted with four gear positions (3.8/6/9/12V). The USB port and DC port can be used at the same time without mutual interference.
- 2.It comes with two USB output ports for Apple and Android phones. Resolved compatibility issues for charging most phones. There is an image label at the output port, which is convenient for selecting the correct port to replenish the battery in time.
- 1.It is an 18650 battery case and a mobile power box. It requires to install 6 18650 rechargeable batteries. The installed battery can be charged directly via the charger. Input voltage is 5V, current is 1A-2.1A
8.8Very Good
View offer on:
Show more
9
SEVENKA18650 Battery Charger, 2 Bay Battery Charger with Smart LCD Display Fast Charge for Rechargeable Batteries Li-ion LiFePO4 NI-MH NI-Cd AA AAA C 21700 26650 13650 16340 18350 18700 RCR123
Main highlights- What You Get: You will get 1* 2 slot battery charger, 1* charging cable, 1* user manual. If for any reason you are not satisfied with your purchased product, please contact us for a refund or replacement.
- Universal Battery Charger: This multi-bay battery charger is fully compatible with 3.7V lithium battery and 1.2V Ni-MH/Ni-CD battery. Includes: 10400/14500/14650/16340/18350/18500/18490/18650/20700/21700/22650/26650/26700/AA/AAA/AAAA/C/SC.
- Intelligent LCD Display: This 18650 and AAA/AA battery charger with large screen can display charging voltage, charging current, charging time, battery type, battery power percentage, and understand the charging data easily.
- Adjustable Charging Speed: Switch between 0.5A/1A/2A fast charging as you need. Note: The adjustable charging speed only applies to lithium batteries. for Ni-MH batteries, the charging speed is 0.5A. With a USB input cable, you can use a laptop, cell phone charger, car charger, etc. to charge the battery.
- 2-Bay Battery Charger: Our rechargeable battery charger is made of fire-retardant PC material with excellent heat dissipation and electronic circuit design. Intelligent circuit to prevent short circuit, over voltage, automatic stop charging after fully charged.
8.5Good
View offer on:
Show more
10
DAOKIDAOKI 5 Pcs 4.3V-27V Charging Discharge Module Adjustable Step Up Module+18650 Battery Holder with Red and Black Lines for 18650 Lithium Battery Fast Charging Boost Mobile Power Protection PCB Board
Main highlights- Various indices：Input voltage: 4.5-8V; Charging voltage: 4.2V(Charge the 3.7V 18650 Lithium Battery); Charging current: up to 1A; Discharge current: the maximum 2A.
- Product use：This module is made for charging rechargeable lithium batteries and Boost module. This module greatly simplifies the process of adding single cell Lithium battery power to your projects.
- Product construction：This product can build a 9v or 12v rechargeable power supply, with a micro usb as a DC 5v input interface.
- Overcharge protection：When the input current reaches the limit flow rate of a certain module, the module will automatically turn on the overcharge protection function to prevent damage caused by overcharge
- Multimeter：Can be used for multimeter, converted to lithium battery charging. VIN+ Port input 5V solar panels, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 18650 mobile charging
