10 Best 13 56 Mhz In The Us - Black Friday 2024
Gialer 100 Pack 1K RFID Smart Intelligent Cards Compatible with Mifare Classic 1K 13.56MHz 14443A Card White Card Hotel Key Cards Access Control Card Printable on Card Printers
Main highlights- [YOUR CARDS ARRIVE SAFE & SEALED] - Credit card size,each card individually OPP bag packed. Blank white both sides(no printed numbers, no magnetic strips and no slots or holes).
- [PROGRAMMABLE] - All cards are pre-programmed with a unique ID(4 Byte UID). The UID is NOT changeable, factory default key: FF FF FF FF FF FF
- [PRINTABLE] - Printable on all ISO Standard Desktop Photo ID Card Printers(NOT Use for INKJET Printers): Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.
- [COMPATIBLE MOST LOCK SYSTEM] - These RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. Can NOT work with HID,Salto and Assa Abloy Locks systems etc.
- [CHIP] - FUDAN FM11RF08 compatible with MIFARE Classic 1K 13.56MHz wireless frequency,according to the ISO14443A standard,and contains 1K bytes of read/write memory,MIFARE and MIFARE Classic are trademarks of NXP B.V.
- Curious about how we select the top products for you? Explore How It Works
hecere RFID Rewritable Dual Frequency In One 125KHz T5577&13.56MHz CUID Black Ceramics Smart Finger Ring Wear for Men or Women (black-21mm)
Main highlights- 5.Our ring is made of zirconia ceramic material, which is very comfortable to wear.
- 4.Both ID and IC use 360-degree omni-directional sensing technology, the sensing effect is much higher than similar products in the market.
- 3.IC CUID chip is pre-programmed, you can directly authorize it to work if you are administrator. You can also use it to copy your old IC card. If you have android NFC phone, you can copy your old card IC card without a copier.
- 2.ID T5577 chip is blank, it can not be used without written or copy.
- 1.There are 2 chips in the ring, one is ID T5577, another one is IC CUID.
- 5.Our ring is made of zirconia ceramic material, which is very comfortable to wear.
Handheld RFID Writer 125KHz Proximity lD and AWID andHID Duplicator +5 White Cards + 5 Writable Key Fobs
Main highlights- Multi-type writing : Copiers can write multiple types of cards, including T5577, CET5200/CET5577EN4205/4305,EL8265/8268,SIC7888
- Contains : This package includes 1pcs 125KHz handheld RFlD Proximity for lD and HiD copier, 5pcswritable keyfob and 5pcs writablecards
- Battery : No need to connect to a computer, just install two 1.5V AAA batteries and you're ready to use(note: batteries must be purchased separately)
- Applicable & Freguency : This copiers assist RFlD Proximity lD and HlD tags. This copier only assist125KHz freguency and does not assist other freguency cards. lt can copy most of the 125KHz lD cardsand does not assist encryption cards. Please confirm the freguency or type of your card beforepurchasing to avoid mistakenly entering incompatible products
Notherss Combo Dual Contactless Card Reader, Mifare Card Reader, ID Card Reader (Combo 13.56mhz+125khz Card Reader)
Main highlights- ^5^ Flexible Setting Tool: Device comes downloading setting tool to set up card data format when output.
- ^4^ Support systems: Windows, Android, iOS, Linux (any device support input box)
- ^3^ Reading Mode: Work as keyboard emmulator, read rfid card date directly into any input box.
- ^2^ Connection: Easily use as keyboard mode, USB play and plug, No need driver.
- ^1^ Card Types: [13.56mhz]:ISO14443A protocal including MIFARE card, S50, S70 type rfid card. [125khz]:RFID EM4100 EM410X Card/Tag
ETEKJOY 100PCS 13.56MHz RFID Key Fob Proximity IC Card ISO14443A Token Tag for Electronic Smart Door Lock, Compatible with MIFARE Classic 1K Card M1, Read Only (Black)
Main highlights- Suitable for 13.56MHz RFID proximity access control system and ID management system. For example, register them to your RFID door lock as new keys if applicable.
- Read only. Not re-writable. Each key fob is already pre-programmed. You cannot re-program them by a card writer.
- Note: These are 13.56MHz key fobs (tags). If you want to register them to your lock system, please ensure that your system uses the same frequency 13.56MHz. Incompatible with other frequencies like 125kHz.
- Compatible with MIFARE Classic 1K Card (M1 Card). If your lock uses M1 card, these key fobs work for your lock too.
- Approx. Fob Size: 1.58*1.26*0.18 inch. Casing Material: ABS Plastic. Package includes 100 Pieces.
No Relay Mini Waterproof,Wiegand 26/34 Output,Dual Frequency 125KHz EM+13.56Mhz MF Card Reader,Door Access Control,Proximity Reader,Access Control Keypad for Access Control Board,Free Keyfob 10pcs
Main highlights- ️Type: EM RFID 125khz reader, Can't work alone as Controler, Normally work with Control board/Fingerprint devcie/Master controller to build completely Security Access Control System.
- ️This Wiegand 26/34 RFID Card Reader is just reading function only,Can't work alone as access controler ,No Relay/No User Capacity, need to work with access control panel or door access controller
- ️Support Wiegand 26-Bit and Wiegand 34-Bit Output; Built-in LED (Double Color LED) and Loud Speaker (Buzzer). Operating Voltage DC 12V
- ️IP68 WaterProof, can Install outside,Small Size and Beautiful Reader.
- ️Card Type: EM-ID Card +MF-IC card Mifare card both(Can't support HID, Cobra, APCiK etc) ,Reading Distance 2-5cm,
125Khz ID RF Card Reader DC 5V 9-16V Outdoor Waterproof RS232 RS485 TTL Level Protocol 13. 56Mhz IC Contactless Serial Connector (125Khz, RS232, DC 12V)
Main highlights- The reader is IP68 waterproof,so it can be used indoor or outdoor.
- The module comes with a single-chip microcomputer (MCU), serial communication, simple hardware connection, and any platform with a serial port can be used.
- The card reader supports 125KHz ID card or 13. 56Mhz IC card, please choose the card reader you need before purchasing.
- RS232, RS485, TTL level communication is optional, and functions can be customized according to your needs.
- Communication baud rate 9600.N.8.1, please contact customer service for other baud rates.
MIFARE Ultralight C - Contactless Ticket IC MF0ICU2 13.56Mhz Key Fob Blue Color (Pack of 10) (50 pF)
Main highlights- Read-only locking per block for the memory above 512 bit
- Field programmable read-only locking function per page for first 512-bit
- Anti-cloning support by unique 7-byte serial number for each device
- 3DES Authentication
- 32-bit user programmable OTP area
BE200 Desktop Kit WiFi Card WiFi 7 Supports 6GHz(BE9300), M.2 BE/AX+BT 5.4+Tri-Band,RF Cables(11 inch), 6dBi High Speed Antennas, Low-Profile Brackets for Windows 11/10 not Support AMD motherboards
Main highlights- With support for the latest WIFI 7 standard, the BE200 offers significant improvements in data transfer rates and network capacity compared to its predecessors.Download the driver from i-n-t-e-l website for search"be200" or contact customers seller service to solve your problems.
- The WiFi 7 BE200NGW WiFi Card supports Tri-Band, uses 2.4GHz, 574Mbps, 5GHz,2400Mbps, and 6GHz,5800Mbps bands, and the BE200 has a maximum speed of 5Gbit/s, which is significantly below the maximum transfer rate supported by the standard.WiFi 7 BE200NGW also supports PCIe (With a PCIe Adapter)and USB interfaces and can be used for desktop motherboards and laptops.It can also achieve "self" load balancing, using its own multi-channel advantages for concurrent data transmission. Solve the problem that WiFi 6 cannot automatically switch bands.
- Only support Windows 10/11 64 bit and Bluetooth 5.4 version,Bluetooth 5.4 adds LE enhanced connection Host set Controller key length function LE channel hierarchy function. Make Bluetooth 5.4 lower latency, stronger anti-interference, improve battery life. If you get and install it and you could download the driver fron I-n-t-e-l official website at the first time.
- Known as 802.11be, Wi-Fi 7 promises up to 46Gbps theoretical throughput, making it 4.8x faster than Wi-Fi 6 and 13x faster than Wi-Fi 5, while maintaining compatibility with older Wi-Fi versions at lower speeds. Wi-Fi 7 also introduces 320MHz wide bands – double that of Wi-Fi 6 thanks to channel banding – alongside 4096 QAM, an amplitude modulation scheme meant to increase link capacity to 575Mbps over a channel bandwidth of 56MHz.
YARONGTECH® RFID MIFARE Card Reader 13.56mhz USB
Main highlights- USB Inteface,No external power source needed,Plug in and Play,so it doesn't need driver,just Plug USB into your computer,and the card number will read on the mouse
- Support 13.56mhz MIFARE,MIFARE and MIFARE Classic are trademarks of NXP B.V.
- Read the first 10 digits in Decimal format,such as "0040856688",if you buy the wrong format,please contact with us,we will send software to you to change the format
- Compatible with: Windows 2000/XP/WIN 7/WIN 10/Vista
- Applications: Identification; Access control, PC Access; Customizing cards; Payment; Anti-fake; Library management
Black Friday Sale
Deal ends in
HrsMinSec