10 Best 12v Marine Blower In The Us
OASIS MARINE 4" Inch in-Line Marine 12V DC Bilge Air Blower Exhaust Fan for Boats
Main highlights- Six-blade fan maximizes airflow and efficiency
- Sealed motor shaft for optimal moisture protection, Corrosion resistant White ABS plastic housing
- Oasis Marine--2 Yr. Warranty
- Built-in mounting feet allow easy vertical or horizontal installation
- 4" Inlet and Outlet Hose - Minimal current draw, high volume air flow, 12v 6 Amp
- Curious about how we select the top products for you? Explore How It Works
Attwood 1749-4 Turbo 4000 Series II In-Line Blower, For 4-Inch Interior Diameter Vent Hose, Water Resistant, 12-Volt
Main highlights- The blade sweep and pitch are engineered for a high lift coefficient, resulting in increased airflow speed for optimized ventilation
- Provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads
- Note: Not for use with chemicals or fuels
- Matches the airflow of competitive in-line blowers with significantly reduced noise output
- Marine ignition protected and has built-in mounting feet for easy vertical or horizontal installation
- Ideal for livewell drains
- For 7/8" I.D. thru-hull
- Features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency
- Brass snaps and plates
- 12-volt, water-resistant white blower intended for use with 4-inch interior diameter vent hose.
Attwood 1733-4 Turbo 3000 Series In-Line Bilge Blower, For 3-Inch Interior Diameter Vent Hose, Water Resistant, 12-Volt
Main highlights- Up to four times more efficient than competitive blowers as it draws up to 40 percent fewer amps
- The blade sweep and pitch are engineered for a high lift coefficient, resulting in increased airflow speed for optimized ventilation
- System airflow exceeds older-style in-line blowers by as much as 25 percent
- Provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads
- Marine ignition protected and has built-in mounting feet for easy vertical or horizontal installation
- Features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency
- Do not operate in area of high heat over 160º F (71º C)
SEAFLO 3" In-Line Marine Bilge Air Blower 12V 130 CFM Ultra-Quiet White for Yacht/Sailboat/Boat - Model Number:SFIB1-130-01
Main highlights- Versatile Mounting: Built-in mounting feet allow easy vertical or horizontal installation, offering flexibility in placement.
- Specifications: Model Number: SFIB1-130-01 Voltage: 12V DC Flow Capacity: 130 CFM (Cubic Feet per Minute) Max Current Draw: 2.5 Amp Intake Pipe Diameter: 3"/76 mm Material: ABS Plastic Application Scenarios: Marine (Yacht, Sailboat, Boat) Weight: 1.1 lbs
- Moisture Protection: The sealed motor shaft provides protection against moisture, enhancing the blower's durability.
- Low Current Draw: Operates with a 2.5 Amp draw, preserving battery life while delivering high-volume air flow.
- High-Efficiency Ventilation: Provides outstanding ventilation airflow for engine compartments, galleys, bilges, and heads with a flow capacity of 130 CFM (Cubic Feet per Minute). The four-blade fan design maximizes airflow and efficiency, ensuring your marine areas stay well-ventilated.
- Four-Blade Design: The four-blade fan maximizes airflow and efficiency, ensuring optimal ventilation in confined spaces.
- Easy Installation: Built-in molded mounting brackets allow for simple vertical or horizontal installation on any flat surface
- Durable Construction: Made from white ABS plastic with a corrosion-proof design and water-resistant motor casing for long-lasting use in marine environments. The ABS plastic construction provides exceptional resistance to impact, chemicals, and UV radiation, ensuring that the blower remains intact and functional even in the harshest conditions.
- Corrosion-Resistant Housing: Crafted with a corrosion-resistant ABS plastic housing, this blower is built to withstand marine environments.
3" Boat Blower Fan Inline 12v Blower Fan High CFM 130CFM Marine Engine Gally Head and Boat Bilge Blower Fan 3 inch Inline Duct Fan Marine Blower Fan Motor Boat Fans 12 Volt (3 or 4 Inch)
Main highlights- WHY BETTER BOAT: We are a family owned American business committed to making premium quality Boat, Marine and RV care products and complete boat accessories marine electric care solutions. We stand behind your satisfaction.
- QUIET LOW AMPERAGE DRAW: Our boat blower motor runs on standard 12v battery power and pulls only 2.5 Amps. Get the peace of mind in your engine compartment, head, galley or bilge area without taxing your battery and operating quietly.
- MARINE GRADE DURABILITY: Our bilge fan is backed by a 2 Year replacment plan, designed to keep water and dirt away increasing durability and prolonging its life. Made with corrosion resistant materials to withstand sea air and high moisture
- EASY TO INSTALL: The 12v marine fan comes encased in a protective cover with built in mounting feet with holes to easily attach your fan and marine blower hose. Also available in our 12v 6 Blade 270 CFM version in 4 Inches with a 6A draw.
- COMPACT & HEAVY DUTY: The compact design for our 12 volt blower fan makes it the perfect solution for small boats with limited bilge space. Don't be fooled by its size with an impressive 4 Blade 130 CFM of air movement to quickly cool and exhaust.
SEAFLO 4" In-Line Marine Bilge Air Blower 12V 270 CFM Quiet Boat White
Main highlights- Ultra-Quiet Operation: Engineered for quiet performance, making it ideal for use in living spaces without disturbing the peace.
- Specifications: Model Number: SFIB4-270-12 Voltage: 12V DC Flow Capacity: 270 CFM (Cubic Feet per Minute) Current Draw: 6 Amp Intake Pipe Diameter: 4" (102 mm) Material: ABS Plastic Application Scenarios: Marine (Yacht, Sailboat, Boat) Dimensions: 12" x 4" x 6" Weight: 1.5 lbs
- SO 8846 Certified: Meets or exceeds ISO 8846 certification standards for safety and reliability.
- Moisture Protection: Sealed motor shaft provides moisture protection, ensuring reliable performance in wet conditions
- Low Current Draw: Operates with a 6 Amp draw, preserving battery life while delivering high-volume air flow.
- High-Efficiency Ventilation: Provides outstanding ventilation airflow for engine compartments, galleys, bilges, and heads with a flow capacity of 270 CFM (Cubic Feet per Minute). The six-blade fan design maximizes airflow and efficiency, ensuring your marine areas stay well-ventilated.
- Easy Installation: Built-in molded mounting brackets allow for simple vertical or horizontal installation on any flat surface.
- Durable Construction: Made from white ABS plastic with a corrosion-proof design and water-resistant motor casing for long-lasting use in marine environments. The ABS plastic construction provides exceptional resistance to impact, chemicals, and UV radiation, ensuring that the blower remains intact and functional even in the harshest conditions.
DC HOUSE 3'' in-Line Marine Bilge Air Boat Blower 12V Electric 130 CFM White
Main highlights- [Parameters] Voltage: DC 12 V; Amp Draw: 2.5 A; Air Flow:130 CFM; Fuse:5 A; Intake Pipe Dia:76 mm
- [Operation] Built-in Mounting Feet Allow Easy Vertical or Horizontal Installation. Turn on the power to start operation, efficiently and easily provide you with clean fresh air
- [Material] The upper and lower cover of the boat engine blowers housing uses anti-corrosion ABS plastic, and the blade is make of strength, good toughness nylon material, with the brushless motor which making the service life of the fan longer
- [Good Performance] Sealed motor shaft runs at 2.5 Amps to ensure low consumption and moisture resistance for strong performance. Can provide ventilation for engine compartment, galley, and bilge
- [Design] The overall structure is compact,Four-blade fan maximize airflow and efficiency, and the amount of air flow is large,so produce a large noise
Amarine Made Marine Boat 12v Electric in Line Bilge Air Blower fan Boat Engine Blowers Marine Cabin Engine Ventilation Blower Fan130cfm (3)
Main highlights- Six/Four-Blade Fan for Optimal Performance: The six/four-blade fan maximizes air flow and efficiency, providing powerful ventilation to ensure the best possible performance from your boat's systems.
- Low Current Draw, High Volume Air Flow: This marine boat bilge blower offers low power consumption with a high volume of air flow, making it an effective and efficient choice for boaters of any experience level.
- High-Performance Marine Boat Bilge Blower: Choose from a powerful 12v/2.5Amp, 130CFM blower with 3" outlet hose or a 12v/6Amp, 270CFM blower with 4" outlet hose for optimal air flow.
- Good Performance: Backed by our commitment to quality and durability, this In line marine bilge blower is designed to provide reliable, high-performance ventilation for your boat's bilge and beyond.
- Easy Installation and Durability: Built-in mounting feet make vertical or horizontal installation a breeze, while the blower's sealed motor shaft and corrosion-resistant ABS plastic housing ensure long-lasting performance and protection against moisture.
XMSound 4" Electric in-Line Marine Bilge Air Blower 12V 270 CFM Quiet Boat
Main highlights- With mounting stand,vertical or horizontal installation are both ok;Waterproof processing can ensure excellent airtight effect when the fan is working, more safe and reliable to use
- Wide Application: This Air Blower is a good accessory for yachts, buildings, caravans, etc. It is easy to install and can be used vertically or horizontally
- This fan is made of quality ABS, high strength, unbreakable, resistant to marine water corrosion and durable to use
- Package Included: 1 pack marine boat electric bilge air blower
- It is more efficient than that of the traditional straight line blower, keep fast air circulation to improve air quality,The noise is just the amount of air moving through the blower,the sound is very little compared to the amazing output and low amp draw.
Pactrade Marine High Performance Turbo Fan Inline 12v Boat Bilge Blower Fan 140 CFM for 3-Inch Diameter Hose Water Resistant Inline Duct Fan 12Volt for Boat Heads Engine Bilges Galleys RVS Yacht
Main highlights- This designed for high output operation, CE certificate Made of Injection Molded ABS. this blower feature front and rear shaft seals and corrosion resistant motor housings for long life. Ideal for engine, compartments bilges, galleys and head closets
- The size of this in-line air blower is 5" L x 5’’W x 3 ½’’ H and the intake pipe diameter is 3". Current: 12 V DC, Amps: 3 ; Fuse: 2.7 A, 140 CFM . Color: Black
- The compact design for this In-Line bilge blower fan makes it perfect solutions for small boat with limited space. 5 Blade 140 CFM of air movement to quickly cool and exhaust.
- The color and dimension shown in the listing are only for reference and may vary among devices used for viewing. Pactrade Marine Product Warranty is ONE (1) Year on all components. Any product developing such defect in material or workmanship within this period will be repaired or replaced providing it is sent to us. Proof of purchase date is required for any claims. Item Number: P13019BK
- The 12v marine fan comes encased in a protective cover with built in mounting feet with holes to easily attach your fan and marine blower hose. This designed to keep water away increasing durability and prolonging its life. Made with corrosion resistant materials to withstand sea air and high moisture
- Our boat blower motor runs on standard 12v battery power and pulls only 3 Amps. Built in mounting feet allows to easy horizonal and vertical installation. With 12v in-line blowers, it drawn lower amp and provide higher air flow. It is operated quiet than standard blowers. Get the peace of mind in your engine compartment, head, galley or bilge area
Black Friday Sale
Deal ends in
HrsMinSec