10 Best 10s 36v Lithium Ion Battery Bms In The Us - Black Friday 2024
Best Choice1
HiXiMiLi ion BMS 10S 36V 40A Smart Bluetooth Lithium Battery Management System with Balance Leads Wires for 36V 40A Lithium ion Battery pack
Main highlights- 【ONLY for 3.7v lithium battery】li ion BMS can only be used for 3.7v cells. The standard discharge voltage range for individual cells is 2.5v to 4.25v. Only Smart BMS has temperature protection, and the temperature protection value can be set.
- 【MULTIPLE PROTECTION】Overcharge protection. Overdischarge protection. Overcurrent protection. Short circuit protection. Recover short circuit protection. Balance function, balance current 30mA.
- 【HiXiMi LiFePO4 BMS】The BMS is made of high quality MOS and IC. Keep your battery long cycle life. Extremely low power consumption. The consumption of the entire device is less than 50uA.
- 【DURABLE】HiXiMi LiFePO4 BMS uses corrosion resistant, water resistance and high resistance ESD protective coating. It is waterproof, dustproof and shock resistant.
- 【12 MONTHS WARRANTY】Please select the appropriate BMS according to your load and battery pack. If you do not know how to choose it, you can tell us your load details and performance parameters, and we will help you choose the appropriate BMS. We strive for quality, followed by high-quality customer service.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
VNSZNRVNSZNR Lithium Battery BMS 36V 40A 10S Li-ion Battery Management System PCB Protection Board with Balance Leads BMS for DIY Lithium Battery Pack 36V
Main highlights- ★【What You Get】36-months warranty and friendly customer service. Quality Guarantee--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED.
- ★【Over-charge over-discharge protection】--- Li-ion battery pack will stop charging when its voltage reaches 4.25V and stop discharging when its voltage reaches 2.7V.
- ★【Multiple protection】Over-charging protection. Over-discharging protection. Over-current protection. Temperature protection. Disconnect protection. Short Circuit Protection. Short Circuit protect recover. Balance Function.
- ★【Heavy Duty】VNSZNR Lifepo4 BMS use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.It is waterproof, dustproof and shockproof.
- ★【Current Protection】----BMS will stop Li-ion battery pack from charging when charge current over 20A and discharging when discharge current over 60A.
9.6Exceptional
View offer on:
Show more
3
BisidaBisida 10S BMS 36V 25A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Split Ports, for Lithium-ion Battery Pack (10S 36V 25A)
Main highlights- 【Wiring Method】The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack.
- 【Preparation Before Installation】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- 【Operating Temperature】Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- 【Multi -Function Protection】Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- 【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
9.3Excellent
View offer on:
Show more
4
BisidaBisida 10S BMS 36V 15A Lithium Ion Protection Board with Wire and NTC, Split Ports, Multiple Protection, Battery Management System for Scooter Batteries Lithium-ion Battery Pack
Main highlights- 【Wiring Method】The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack
- 【Operating Temperature】Bisida BMS Lithium Ion supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. (Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data)
- 【Notice】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- 【Multiple Protection】Bisida 36V BMS has a variety of protection functions, such as Overcharge Protection, Overdischarge Protection, Overcurrent Protection, Short circuit Protection, Temperature Protection, Disconnection protection.
- 【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
9.0Excellent
View offer on:
Show more
5
DALYDALY BMS 10S 36V 20A Li-ion Battery Protection Module PCB Protection Board with Balance Leads Wires BMS for 18650 Battery Pack 36V(Standard BMS,20A)
Main highlights- [Packing List]3.7V Li-ion NCM BMS*1,NTC sensor*1,Sampling cable*1,Instruction Manual*1.Quality Guarantee--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED
- [Note] Standard BMS dosen't have communication functions. If you need smart BMS, active balancer, parallel module or other accessories, please contact online customer service.We offer 24-hour one-on-one customer service and lifetime technical support.
- [Easy to install]Easy to plug and unplug, which allows you to effortlessly create an electrical connection between the battery pack and the BMS.
- [Double Protection] Double protection by injection patent technology and patent shell.Waterproof,Dustproof,Shockproof and Anti-static;High-quality components, pressure-resistant and durable material, high acquisition accuracy.
- [DALY BMS]Overcurrent,Overcharge,Overdischarge,Short circuit, Temperature protection.DALY BMS maximizes optimizes the lithium battery performance, and extends the battery lifetime to a large extent.
8.9Very Good
View offer on:
Show more
6
AkozonAkozon Protection Board 35A 36V 10S BMS PCB Protection Board with Balance and Heat Dink for 18650 Li-ion Battery Cell
Main highlights- 【Unique design】wiring is neat, avoiding right-angled lines and curveing the edges; reduce signal vias to avoid signal distortion and cross interference; the wiring identifications clear and easy to understand avoid misconnection
- 【Scope of application】The 35A 36V 10S BMS PCB Protection Board is suitable for 10-cell lithium-ion batteries, such as ternary batteries, manganic batteries and cobalt acid batteriesbms 36v 10s
- 【Note】Before installing the protection board, the batteries must be matched well. The better the battery consistency is, the farther the running distance is, the best performance of the protection board is; the battery should be connected in parallel and then in series.Make sure the welding is correct (18650 battery with nickel spot welding, other batteries with solder welding), do not use screws to avoid burning the IC of the protection board
- 【Necessity】The material characteristics of the lithium battery make it impossible to overcharge, over discharge, overcurrent, etc. during use, so choosing the right protection board and applying it properly is critical to the battery life.This protection board provides stable various charging and discharging protection functions such as overcharge protection, overdischarge protection, overcurrent protection and short circuit protection
- 【Excellent performance】The charging and discharging interfaces are the same. With balanced heat sink and 10 low internal resistance high power MOS. The continuous discharge current is 35A. Instantaneous discharge current is 100A. It has a balancing function that ensures that each battery unit is fully charged at the same time
8.6Very Good
View offer on:
Show more
7
FafeicyFafeicy 10S 36V 30A Li-ion Cell Battery PC B Board with Balance Function Battery Protection Board 36V for 10 Series Cell Li-ion Batteries
Main highlights- This Board supports overcharge protection, over-discharge and short circuit protection. The package including one board, and one cable.
- The overdischarge voltage is 2.6v, and the overcharge voltage is 4.25v.
- The board is for 10 series cell Li-ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- The Board is suitable for electric car, electric power assistant car, skateboard car, inverter, etc.
- It has balance function which would ensure each battery cell being fully charged at same time. The maximum working current is 30A, and the continuous maximum current is 20A.
8.5Good
View offer on:
Show more
8
BisidaBisida 10S BMS 36V 30A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Solar Energy Storage, Balance Car Lithium-ion Battery Pack (10S 36V 30A)
Main highlights- 【Wiring Method】The wiring methods of Common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- 【Preparation Before Installation】Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5MΩ, and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- 【Operating Temperature】Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20°C and high temperature protection up to 70°C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- 【Multi -Function Protection】Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- 【High Quality】Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
8.3Good
View offer on:
Show more
9
QINIZX10S 32V 36V 42V 1.2A Li-ion Lipo Lifepo4 LFP Battery Active Equalizer BMS Balancer Inductive Balance Lithium Battery Energy Transfer Board (10S)
Main highlights- Voltage balance accuracy: 30mV (typical value) between adjacent voltages; Balance current: 0.1V
0.2V, balanced current 1.0A (max 1.2A); Under-voltage protection dormant voltage: The adjacent voltage difference is less than 0.03V and enters dormant state, Sleep current 10uA. - Tips: The equalization board is not a BMS protection board, it is an auxiliary to the protection board, so no matter how bad the battery you use to test, it can be used, But it has no overvoltage/overdischarge protection function. Overvoltage/overdischarge is the function of the BMS protection board. If voltage protection is required, it is best to use it in parallel with the BMS protection board.
- NOTE: Only can use 10s battery-packs, and Not recommended to use poor quality battery pack to test. The indicator light will flash and report an error. Before connecting the equalization board, be sure to check whether each battery is wired correctly(Measure whether the voltage of each battery string is correct), and do a good job of insulation. otherwise it will short-circuit and burn the board. Note that first contact the B- pin (The order must be: B-, B1,... B10) and insert it diagonally upwards, otherwise it may cause the board to burn out.
- Balance method: Detect that the voltage difference between adjacent batteries is greater than 0.1V to trigger the start of equalization, and the adjacent battery voltage difference is less than 0.03V to stop working. (Tips: The inductance equalization board needs to be charged/discharged many times before the voltage equalization can achieve a better effect.)
- Applicable battery type: NCM(Li-ion)/LFP, NOT support LTO; Single voltage working range: 3.0V-4.2V; Suggested battery capacity: below 30AH, If more than 30AH, pls search Capacitor Faster Whole Group Balancer " B096NLHXPF " to purchase. PCB size about: 4.6x2.24x0.31inch. Indicator light: LED on, balance in progress; LED off, balance ends; LED flashing: battery drop string indicator/circuit failure.
8.0Good
View offer on:
Show more
- Voltage balance accuracy: 30mV (typical value) between adjacent voltages; Balance current: 0.1V
10
DALYDALY BMS li-ion 10s 36V 60A with Separate Port Temperature Sensor for Lithium Battery Pack Rated 3.7V Charge and Discharge Protection
Main highlights- [Packing List]3.7V Li-ion BMS*1,NTC sensor*1,Sampling cable*1,Instruction Manual*1.Quality Guarantee--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED
- [Note] Standard BMS dosen't have communication functions. If you need smart BMS, active balancer, parallel module or other accessories, please contact online customer service.We offer 24-hour one-on-one customer service and lifetime technical support.
- [Easy to install]Easy to plug and unplug, which allows you to effortlessly create an electrical connection between the battery pack and the BMS.
- [Double Protection] Double protection by injection patent technology and patent shell.Waterproof,Dustproof,Shockproof and Anti-static;High-quality components, pressure-resistant and durable material, high acquisition accuracy.
- [DALY BMS]Overcurrent,Overcharge,Overdischarge,Short circuit, Temperature protection.DALY BMS maximizes optimizes the lithium battery performance, and extends the battery lifetime to a large extent.
7.9Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 10s 36v lithium ion battery bms
