10 Best Wick Desoldering Wire In The Us
Best Choice1
BEEYUIHFBEEYUIHF Desoldering Wick Braid 30M - 98ft Length 2.5mm Width Solder Wick Braid with Flux, Cable Remover Tool Solder Sucker W 0.10'' L 98'
Main highlights- Wide range of use:The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder Remover wire Materials：The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- BEEYUIHF Desoldering wick with flux Size: W 0.10'' L 98'; width: 2.5mm, Length: 30M - 98ft - Large Size Desoldering Braid
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
MOGAOPIMogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool
Main highlights- Widely used Solder Remover: The Desoldering Wick Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- One handed solder sucker with powerful suction: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome
- Desoldering Wick with Copper Braid: Solder wire, replacement tip, 2pcs solder braid 2.5mm Width, 1.5m Length, copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Body with Non slip Sponge and Nylon Nozzle Solder Wick: The body of the desoldering vacuum pump is made of ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one handed use
- 6 in 1 Solder Removal Tool: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts
9.8Exceptional
View offer on:
Show more
3
LesnowLesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
9.3 materials Quality9.1 Simple to use8.9 worth the moneyWhy we love it
Efficiently removes solder from various electronic components.
10ft length ensures ample supply for extended projects.
High-quality copper braid enhances absorption and capillary action.
9.7Exceptional
View offer on:
Show more
4
Asofelk4-Pack Desoldering Wick Solder Wick Braid with Flux No-Clean Electronic, 2.0/2.5mm Desoldering Wick & Soldering Wick For Solder Remover, Desoldering Braid Wire Roll (Total 20ft)
Main highlights- Variety of Sizes Included: The pack includes 4 pack in two sizes, 2.0mm and 2.5mm, with each size measuring 1.5 meters in length. This variety allows for flexible use depending on the size of the solder joint and the specific needs of your project.
- No-Clean Flux for Hassle-Free Use: The no-clean flux formulation eliminates the need for additional cleaning after desoldering, saving time and effort. It leaves no residue, ensuring a cleaner workspace and a more efficient repair process.
- High Absorption Capacity: Designed to quickly absorb excess solder, this desoldering braid ensures effective removal with minimal effort. Its high absorption capacity reduces the risk of solder bridges and ensures a clean, professional finish.
- Effective Desoldering Performance: This 4-pack of solder wick braid offers superior desoldering capabilities with its high-quality flux-infused braid. Efficiently removes solder from electronic components, ensuring clean and precise desoldering every time.
- Convenient Pack Size: The 4-pack configuration provides a practical solution for frequent use and ensures you always have a backup on hand. Ideal for electronic repairs, soldering tasks, and DIY projects, this pack meets diverse needs with reliability and convenience.
9.5Excellent
View offer on:
Show more
5
SRA Soldering ProductsSRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool
Main highlights- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.
9.4Excellent
View offer on:
Show more
6
caihongweicaihongwei caihv-Welding Rod, Solder Wick 1.0mm-2.5mm 3.0mm 3.5mm 4.0mm Desoldering Braid Wire, Tin Remover BGA Welding Soldering Tools, Strong and Durable (Diameter : 4.0mm)
Main highlights- Width : 1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.5mm 4.0mm.
- Made of high-quality materials.
- It is non-toxic, tasteless and very safe to use.
- Function : Used to remove excess solder.
- Feature : Anti-oxidation,anti-corrosion.
9.3Excellent
View offer on:
Show more
7
BEEYUIHFBEEYUIHF No Clean Desoldering wick Braid, No residue Solder wick Braid with Flux, Solder Remover wire Kit, Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (Pack of 2Pcs) #NX942
Main highlights- Wide range of use: The braided solder wick is suitable for studio, laboratory, school, professional repair, DIY hobbyist and industrial soldering work; Solder braid wick tape is a handy and practical tool that helps solderers clean solder joints, fix soldering problems, and improve soldering efficiency and quality. Bring convenience to your welding work.
- The desoldering braid wick #NX942 Feature: Enhanced solder wick and wire, tin suction ability is more excellent, and for the old audio circuit board, can also be very good for tin suction effect. Improve the efficiency of rework and increase the speed of cleaning the PCB pad.
- Solder Remover wire Materials：The solder wick braid is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also absorbs the tin more powerfully and no residue. The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- BEEYUIHF Desoldering Wick with Flux Size: Width: 2.5mm/0.10'', Length: 3M/10ft/9.8'
- BEEYUIHF #NX942 desoldering wick braid with flux advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards. Add industrial-grade flux and rosin, the ratio is coordinated, the flux can help fully melt the stubborn tin.
9.0Excellent
View offer on:
Show more
8
BEEYUIHFBEEYUIHF 3M/10ft 2.5mm Desoldering wick Braid, Solder wick Braid with Flux, No-clean Solder Remover wire Kit,Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (2 Piece 2.5mm 3m)
Main highlights- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder wick Braid wide range of use: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- Solder Remover wire Materials：The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- BEEYUIHF Desoldering wick with flux Size: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
8.8Very Good
View offer on:
Show more
9
SYOKO10% OffSYOKO 3 Pack Desoldering Wick, Braid Length 10ft/3M Width 2.5mm, No-Clean Solder Remover Wick, Used to Remove the Solder and Disassemble Electronic Components - (SW-2530)
Main highlights- √ 「Wide Range Of Use」: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- √ 「SYOKO Solder Wick」: .High-quality materials The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption
- √ 「Easy to Use」: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering. place it over the area where you want to remove the solder and heat it up.
- √ 「Braid Size」: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
- √ 「After Sales」: If you have any problem after receiving the solder wire, please feel free to contact us. We will reply at the first time!
8.6Very Good
View offer on:
Show more
10
FireKingdomFirekingdom Goot Braided Desoldering Cable Wire Solder Remover Wick with Sucker Cp-3015
Main highlights- This type of detachable solder core has geometrically precise copper wire weaving, good quality, and starts working from the tip of the detachable solder core. Once the detachable solder core and solder are heated, the solder weaving fabric can quickly absorb melted solder and leave a clean working area.
- If you are not satisfied with the AUVOTTOKA solder core for any reason, we will provide a full refund. If you have any questions about the use of the product or if the product is damaged, please contact us and our engineers will solve the problem for you as soon as possible.
- If it is the first time using a solder core, it is recommended to use multi-point flux to assist in cleaning. At the same time, to prevent burns, do not directly contact the solder core at close range during use.
- Braided solder cores are suitable for laboratory, home, and industrial welding work. They can be used to correct errors on small boards on PCBs, remove relays and other components from printed circuit boards, re solder mechanical keyboard switches, remove old wires from equipment, remove computer parts such as motherboards, and clean alloys on SMD components
- 1 unclean solder core, each about 5 feet long and 0.12 inches wide, sufficient in quantity and length to meet your daily needs
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for wick desoldering wire
