10 Best Wbc Analyzer In The Us - Black Friday 2024
Best Choice1
NETALLYNXT-1000, NXT Portable Spectrum Analyzer
Main highlights- USB-based 2.4GHz/5.0GHz
- Spectrum Analyzer for EtherScope nXG
- NetAlly OEM Part
- NXT-1000, NXT Portable Spectrum Analyzer
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
UEi Test InstrumentsUEi Test Instruments Ha1 Hermetic Compressor Analyzer
Main highlights- Top load panel with positioning holes allows unit to transport loads
- Oil lubricated pump improves durability
- Indicates continuity and ground faults in motor windings with LED lights
- Free locked rotors by reversing motor action - Dual voltage operation of 120/240 VAC
- Convenient breakout jacks for measuring voltage and resistance
- Cast iron cylinder enhances pump life
- 3 ranges of 250 VAC starting capacitors between 88-301 MFD
9.6Exceptional
View offer on:
Show more
3
innomakerLA1010 USB Logic Analyzer 16 Input Channels 100MHz with The English PC Software Handheld Instrument,Support Windows (32bit/64bit),Mac OS,Linux
Main highlights- The signal could be analyzed with many standard protocols, to get more straightforward communication data.
- Supported OS: MAC OS, Linux, Windows XP, Vista, Windows 7/8/10(32/64bit)（Updated By WIKI）
- LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz. Along with the PC software KingstVIS.
- It helps a lot in testing and analyzing digital system(MCU/ARM/FPGA, etc.), developing and debugging several communication programs, or monitoring and recording some digital signals for a long time.
- 16 channels of digital signal could be sampled at the same time, and then they could be converted to digital waveform and displayed on the PC screen.
9.4Excellent
View offer on:
Show more
4
HiLetgoHiLetgo USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug
Main highlights- The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions; 8-channel
- The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions;
- Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;
- Input voltage range: -0.5V to 5.25V; Input Low Voltage: -0.5V to 0.8V; Input High Voltage: 2.0V to 5.25V
- Input Impedance: 1Mohm || 10pF (typical, approximate); Crystal: +/-20ppm, 24MHz
9.2Excellent
View offer on:
Show more
5
DreamSourceLabDreamSourceLab DSLogic Plus USB-Based Logic Analyzer with 400MHz Sampling Rate, 256Mbits Memory, USB 2.0 Interface, 16 Channels
Main highlights- Worked with DSView software, which is compatible with Windows, macOS and Linux. DSView supports nearly a hundred protocol decoders. Additionally it's also an open source software, you can find it on github.
- USB 2.0 type-c interface. Up to 16G sample depth in stream mode. Support following stream modes: 100MHz @ 3 channels / 50MHz @ 6 channels / 25MHz @ 12 channels / 20MHz @ 16 channels.
- Support adjustable threshold (0.1 Step). Additionally with shielded fly wires and unibody aluminum case, you can get a better and cleaner waveform.
- 256Mbits on-board SDRAM memory. Support following buffer modes: 400MHz @ 4 channels / 200MHz @ 8 channels / 100MHz @ 16 channels.
- 16 digital channels. Dual-mode support. In stream mode, data will be captured and transferred into PC memory in real time. With this mode, you can get long sample duration; In buffer mode, data will be captured and stored into on-board memory temporarily. With this mode, you can get a high sample rate.
8.9Very Good
View offer on:
Show more
6
HTRC150A High Precision Power Analyzer Multi Meter for Measuring Power Watt (W) Voltage (V) Current (A) Charge (Ah) Energy (Wh)
Main highlights- Operates from 4.8V to 60V or 0V to 60V with optional auxiliary battery. Measures 0-150A, resolution 0.01A; Measures 0-60V, resolution 0.01V; Measures 0-6554W, resolution 0.1W; Measures 0-65Ah, resolution 0.001Ah; Measures 0-6554Wh, resolution 0.01Wh
- Notice: This watt meter was designed to be safe in systems unsing less than 60V and carrying current up to 150A. DO NOT EXCEED THE LIMITES
- Multifunctional Tester: Evaluate RC battery charging efficiency.Measure power and energy consumption of any battery powered device. Predict model airplane flight time,Choose the best propeller/most efficient motor .Check for wiring and connector power loss.Ensure peak currents are safe for motor, ESC & Battery as well as wiring and connectors
- Measuring Current (A), Voltage (V), Watts (W), Amp-hours (Ah), Watt-hours (Wh), Peak Amps (Ap), Minimum Volts (Vm), Peak Watts (Wp). Widely application battery tester, can test Solar Power batteries and chargers
- Bright blue backlit LCD display, easy reading. 12 gauge wire take higher volt and current. It is indispensable for analyzing, testing and troubleshooting any DIY DC power project. Very accurate in giving DC volt, ampere and wattage
8.8Very Good
View offer on:
Show more
7
CYSuneDigital Logic Analyzer LA104 USB Mini 4 Channels 100MHz Max Sampling Rate Built in 8MB Flash Storage 2.8 Inch Oscilloscope
Main highlights- Three serial protocol analyses: SPI, I2C, UART, supporting user-defined protocol mode; with seven different trigger types.
- Suitable for digital hardware verification and debugging, monitoring, measurement and optimization of digital hardware performance, and integration, debugging and verification of embedded software.
- LA104 is a four-channel logic analyzer with built-in screen and battery. The casing of LA104 is made of aluminum alloy through CNC.
- LA104 has a 2.8-inch LCD display that allows the measured logic waveform to show directly on the screen, without connecting to other external display devices.
- It is compact and portable, making it easy for users to work on bench or outdoors.
8.7Very Good
View offer on:
Show more
8
Comidox13% OffComidox 1Set USB Logic Analyzer Device Set USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 Hot
Main highlights- UART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols.
- This item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView.
- The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
- Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
- A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high.
8.4Good
View offer on:
Show more
9
KeeYeesKeeYees USB Logic Analyzer Device with 12PCS 6 Colors Test Hook Clip Set USB Cable 24MHz 8CH 8 Channel UART IIC SPI Debug for Arduino FPGA M100 SCM
Main highlights- This kit contains 12pcs SMD IC 6 Colors Test Hook Clips which are ideal for using this 24MHz 8CH logic analyzer.
- Reliable Technical Support: We have prepared detailed tutorial, includes: guidance manual, demo code, burning tools, necessary class libraries. Please visit our website (github: Keeyees/KY-57) to get tutorial or can contact us on Amazon, we will send PDF Document to you.
- If you are doing microcontroller, ARM system, FPGA development, we highly recommend you purchase this product! This item will help you solve your problem when you do MCU related products, especially for UART, SPI, IIC and other communication debugging.
- Compatible with the Logic analysis software and open source programs such. B. sigrok (protocol analysis of RS232, SPI, IIC, 1-Wire, etc.)
8.3Good
View offer on:
Show more
10
FerwoohFerwooh USB Logic Analyzer 24MHz 8CH 8 Channel UART IIC SPI Debug Device + 12PCS 6 Colourful Test Hook Clip Set + USB Cable + Debugging Tool Sets
Main highlights- This Set of kits contains 12pcs SMD IC 6 Colors Test Hook Clips matching for using this 24MHz 8CH logic analyzer, with USB cable and Female cable.When you do MCU related products, especially for UART, SPI, IIC and other communication debugging, this sets will be helpful.
- Supports UART IIC SPI debugging, WIN7 (32 & 64), 2K, XP, LINUX.
- Logic sampling can go up to 24M/s per channel, in fact 10M/S is plenty, Maximum sampling rate: 24Msps.
- Input voltage range: 0~5V;Digital channels: 8; Input low level: < 0.8V; Input high level: > 1.4V; Error/Accuracy: Pulse width measurement: ±42ns (at 24MHz).
- 8 channels: You can collect signals while analyzing data. It can monitor 8 different digital signals. Sample and analyze like I2C, UART.The sampling rate can be set as follows. 24KHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;
8.1Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for wbc analyzer
