Torque Converter Clutches of 2025
Best Choice1
Clicked 5 times in the last monthIPARTS EXPERT212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series
Main highlights- 【TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLE】DIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
- 【REALLY WAKES UP THE BIKE】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
- 【FOR YOUR CONVENIENCE THIS KIT COMES WITH】1 x 3/4" Driver Pulley;1 x 5/8" Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware.
- 【BRING YOUR OFF-ROAD MACHINE TO LIFE】This TAV2 30 Series Go Kart Clutch Kit fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
- 【A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCH】This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
- 【30 SERIES TORUQE CONVERTER BELT FOR 6" DRIVEN】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
SJVLXHISJVLXHI Super 30 Series Torque Converter Driver Clutch For 196/212/225cc Engine,3/4" Bore
Main highlights- Take full advantage of a high HP high RPM small block engine (196/212/225cc)
- No adjustments needed,Limits/Eliminates belt slippage
- It is highly recommended to use an impact gun to install this and all drivers
- Fit For all 30 series TAV kits with 3/4" bore
- Features and Specs:Bore: 3/4" (.750"),Key-way: 3/16", NOT INCLUDED
9.7Exceptional
View offer on:
Show more
3
VEVOR14% OffGo Kart Torque Converter Kit CVT Clutch 3/4" Replaces Comet TAV2 30-75 218353A Manco 10T #40/41 (Comes with 1 Sprocket - 1x 10 Tooth 40/41)
Main highlights- Vehicle Fitment: The torque converter is compatible with 3/4" & 5/8" straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes.
- Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter.
- Quality Drive Clutch: We have a 3/4'' Driver Pulley and a 5/8'' bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems.
- Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life.
- Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4" driver pulley. 1 x 5/8" bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware.
9.6Exceptional
View offer on:
Show more
4
YOHIB30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4" Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589
Main highlights- 【Wide Use--torque converter 3/4】: Small engine torque converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
- 【Wide Use--torque converter 3/4】: Small engine torque converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
- 【Wide Use--go kart clutch belt】:The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
- 【Torque Converter】：This 3/4" torque converter is a direct replacement kit for the most popular comet TAV2 go-kart torque converter 30 series.
- 【30 Series Torque Converter and Go Kart Drive Belt】 ：New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4" Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589.
9.5Excellent
View offer on:
Show more
5
loosooloosoo Torque Converter Driver Clutch Super 30 Series, Compatible with Predator 212cc 196cc 6.5hp Small Engine 3/4" Bore GX160 CT200U-EX CT200U KT196 Baja Warrior Heat MB200 MB165 Mini Bike Go Karts
Main highlights- 【PACKAGE INCLUDE】1 * 30 series torque converter driver clutch, 1 * drive belt , 2 * gaskets.
- 【NOTICE】 Do not run without drive belt. Remember to tighten the driver to the engine.
- 【FITMENT】This 30 series clutch is for installation on numerous Mini Bikes Go Karts and small clone engines featuring a 3/4" bore shaft. Mini Bikes: Coleman CT200U BT200X CT200U-ex Baja MB165 MB200 (Warrior Heat Mini Baja) Massimo MB200 RT200 Axi M200 Trailmaster MB200 and Meg Moto 212. Go Karts: KT196 Yerf Dog Manco and Murray models. Small Clone engines: Predator 212cc 196cc 224cc 225cc 6.5hp hemi ghost Tillotson 212cc Billet Hard 212 Duromax 7hp 212cc Hisun 196cc Honda GX160 GX200.
- 【EXCELLENT SERVICE】If you encounter any difficulties, please don't hesitate to reach out to us. We ensure a prompt response within 24 hours. Thank you for your continued support.
- 【EXCELLENT PERFORMANCE】The 30 series clutch boasts rapid acceleration (high RPM), seamless and tranquil engagement (reduced belt slippage), superior power transmission (enhanced torque), and straightforward installation. It significantly outperforms and surpasses the original driver in terms of both performance and reliability. The 203589/5959 go-kart drive belt, crafted from premium-grade rubber, exhibits heat and corrosion resistance, ensuring robust durability in application.
9.4Excellent
View offer on:
Show more
6
GMACDelco GM Genuine Parts 24227792 Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve
Main highlights- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
- Helps control the flow of fluid within control valve body
- Helps control clutch application pressure
- GM-recommended replacement part for your GM vehicle’s original factory component
9.1Excellent
View offer on:
Show more
7
MOJTBE212CC Torque Converter CVT 3/4" Go Kart Clutch COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420 Chain Driver Pulley Replacement Set - 30 Series
Main highlights- This torque converter fits a 3/4" shaft，and comes with your choice of a 10 tooth sprocket for a 40/41/420 chain and 12 tooth sprocket for #35 chain。 Used in conjunction with hp2 to 8hp engines, the 30 series asymmetric design makes your off-road machines full of energy
- This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
- This 3/4" Torque Converter is a direct replacement that fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. kart torque-converter 30 series, It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- Quality Ensurance for More Power: This go-kart torque converter is made of high-quality iron and aluminum material which is lightweighted, sturdy and durable while allows higher speeds out of small engine, and smoother acceleration. This clutch will help you get more power out of your small engine by reducing engine load
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, H'onda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
8.8Very Good
View offer on:
Show more
8
GYMMEDSGYMMEDS 30 Series Torque Converter 3/4" Bore Fit for Predator 212cc Engine CVT Clutch 10T #40/41/420 & 12T #35 Chain Replacement Go Kart Mini Bike Manco Comet TAV2 30-75 Drive Belt Pulley Parts Kit.
Main highlights- 【Widely Fitment&With 2 Sprockets】Recommende fit for predator 212cc 6.5 hp go kart torque converter clutch all 2HP-7HP engines,3/4" Shaft with flat key.Includes 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts coleman mini bike.
- 【Including Two Screw Kits】We have two screw kits。 If you use the engines of American brand or American standard shaft thread (UNF) such as Honda, Preditor, or other not Metric standard thread shaft, please use this UNF screwes.if it not workes good please use the metric screws in other bag.
- 【High Quality Materials】Our Torque Converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
- 【Easy to Install】:for your convenience Our kit comes with everything you need for a hassle-free installation, including 1 x 3/4" Driver Pulley, 1 x 5/8" Driver Pulley, 1 x Plastic Assy Cover, 1 x Aluminum Mounting Plate, 1 x Drive Belt, 1 x 10 Tooth Sprocket for #40/41/420 Chain, 1 x 12 Tooth Sprocket for #35 Chain (Chain not included), and 1 x Full Mounting Hardware.
- 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft.This Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, BT200X, cx100, ct200u, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM RPM by changing out springs (not included) and other adjustments.
8.7Very Good
View offer on:
Show more
9
QYMOTOQYMOTO 30 Series Torque Converter 3/4'' Bore KT196 Go Kart Clutch Driver Pulley for Coleman 6.5 HP Go Kart Mini Bike Clutch Driver Pulley for Comet Manco Go Kart 219552,5957,212cc Engines
Main highlights- ※ Not compatible with the 16mm Crankshaft Hisun Engine on Coleman Minibikes.
- This 3/4" Torque Converter is a replacement kit for 30 series go kart clutch. It fits all engines with a 3/4" Straight Crankshaft. It's compatiable with Comet,Trail Master,Manco Go Karts,BT200X,Baja M200 models.
- Package: 1X 3/4'' driver pulley torque converter 1x metal driver pulley washer (spacer)
- It works well with your go kart or mini bike clutch and engine ,give you more power good performance without overload.
- 30 series go kart Engine clutch, 3/4" bore for torque converter clutches and 6.5hp 212CC engines in go karts, mini bikes, and lawn mowers with 3/4" crank shaft.
8.5Good
View offer on:
Show more
10
JeremywellJeremywell 30 Series Torque Converter Driver Clutch 1" Bore For Manco 8190 Comet 219554A
Main highlights- Asymmetrical
- 30 series driver unit with 1" Bore
- 1/4" Key way
- 1" Bore
8.4Good
View offer on:
Show more
Similar products on Amazon
