10 Best Sx1273 Lora Module In The Us - Black Friday 2024
Best Choice1
UeeKKooSX1262 LoRa Data Transfer Kit, RS232/RS485/RS422 to LoRa, Based on SX1262, up to 5KM Distance Communication, Suitable for Data Acquisition in Industry/Agriculture (with Serial Cable + Power Supply)
Main highlights- The LoRa Spread Spectrum Technology: Compared to traditional communication, LoRa Chirp Spread Spectrum (CSS) and Frequency Hopping Spread Spectrum (FHSS) technologies greatly improve the performance of long-range communication and anti-interference, widely used in military and industrial communication fields.
- SX1262-LoRa-DTU is a wireless data transfer unit with RS232, RS485 and RS422 interfaces based on the SX1262 module. 850 ~ 930MHz frequency, applicable to Europe, North America and Oceania. Adopts LoRa Modulate and Demodulate technology, with the advantages of anti-interference and long-distance communication (up to 5KM). Supports point-to-point, point-to-multipoints, relay network, AES, etc.
- Relay Networking:The radio station can realize multi-level relay networking, suitable for ultra long-range distance or complex environment networking communication, allows multi networking on the same region.
- Receive Signal Strength Indication (RSSI): Supports serial port output of data packet signal strength, can be used to evaluate signal quality, improve communication network, and measure distance. Supports serial port output of environmental noise signal strength, can be used to manually realize LBT function.
- Multiple communication methods:Can Be Set Via Software: Stream transfer mode, Packet transfer mode. AT Command Mode:Users can query the current status of the module or set parameters by sending AT commands.
- Listen Before Talk (LBT): The module will actively monitor the environmental noise of the channel before sending. If the noise exceeds the threshold, the sending will be delayed. This function can improve the communication success rate of the module in harsh environments, suitable for networking transmission and anti-collision processing.
- AES Communication: The secret key is writable but unreadable, the devices with the encrypted transmission enabled and the same key can communicate with each other normally for greater security.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
UeeKKooSX1262 LoRaWAN/GNSS HAT SX1262 RF Chip LoRa Module Expansion Board for Raspberry Pi 5/4B/3B+/Pi3B/Pi Zero W WH/Zero 2W, with Magnetic CB Antenna, Suitable for Sub-GHz Band Network, with GNSS Antenna
Main highlights- with Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5/4B/3B+/Pi3B/2B/Raspberry Pi Zero WH/Zero 2W,etc.
- This series of products are LoRa modules using the new generation of SX1262 RF chip, with the features of long communication distance and strong anti-interference ability. This version includes GNSS antenna.
- Suitable for Sub-GHz frequency band network, 850~930MHz frequency band. The new generation SX1262 has higher power efficiency and longer transmission distance than the SX1278.
- Onboard button cell holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts. Onboard 4 LED indicators for module operating status.
- Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network. Onboard L76K module with GPS/BD support, provides accurate clock and location info for node module.
- Application examples: Industrial control, intelligent home, and data acquisition...
9.7Exceptional
View offer on:
Show more
3
MakerFocusMakerFocus LoRa SX1262 Module 863 928 MHZ LoRaWAN IoT Development Board ASR6502 MCU 128KB Flash Ultra Low Power Consumption Solar Energy Powered Design with Antenna for Arduino and Intelligent Scene
Main highlights- Ultra Low Power Design: 3.5uA in deep sleep. Onboard solar energy management system, can directly connect with a 5.5~7V solar panel; Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management,overcharge protection,battery power detection,USB/battery power automatic switching)
- Strongest Protection: Type C interface with complete ESD protection,short circuit protection, RF shielding,and other protection measures
- Perfect Circuit Design: Based on ASR6502, integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
- LoRa Dev Board: Friendly designed for developers, easy to verify communication solutions
- Excellent Feature: Perfectly compatible with Arduino; good impedance matching and long communication distance. Wide range of application scenarios - Smart Agriculture, Scenic Area Management, Industry 4.0, Urban Lighting
9.6Exceptional
View offer on:
Show more
4
XYGStudyfor Raspberry Pi Pico SX1262 LoRa Node Module, LoRaWAN Protocol Support, Choice of Frequency Band 915M (902~930MHz) @XYGStudy (Pico-LoRa-SX1262-915M)
Main highlights- The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing problem between transmission distance, interference immunity, and power consumption that traditional solutions aren't able to deal with.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards. Supports LoRaWAN protocol, different frequency bands are available
- SX1262 LoRa node module for Raspberry Pi Pico, LoRaWAN protocol support, choice of frequency band
- Part Number: Pico-LoRa-SX1262-915M
- It supports LoRaWAN protocol, which allows it to connect the TTN, ChirpStack servers through a LoRa gateway to use LoRa Cloud service fast and easily.
- Adopts active temperature compensation crystal oscillator, ensuring stable long-term operating in extreme high/low temperature conditions
9.5Excellent
View offer on:
Show more
5
waveshareWaveshare USB to LoRa Data Transfer Module, Based On SX1262, Suitable for Data Acquisition in Industry and Agriculture-TCXO Crystal oscillator
Main highlights- USB-TO-LoRa-xF uses TCXO crystal oscillator and is recommended to be use in 0~85℃ temperature.
- Supports preamble detection, with CRC, automatic packetization, 960 bytes cache functions. Supports LBT sending, RSSI output, AT command configuration
- Supports host configuration and firmware upgrade (support firmware customization for batch order). Comes with online development resources and manual.
- Adopts the original SX1262 chip, with -148dBm reception sensitivity and 22dBm emitt power
- AES communication to ensure data transmission security. Supports multi-level relay networking to increase the wireless communication distance
9.3Excellent
View offer on:
Show more
6
Luabby SmartLuabby Smart Lora1276 915MHz sx1276 chip 100mW Wireless Transceiver Lora Module X 2 pcs
Main highlights- which adopts LoRa TM Spread Spectrummodulation frequency hopping technique
- integrates Semtech RF transceiver chip SX1276
- This module is 100mW and ultra small size, widely used in AMR , remote industrial control filed.
- The features of long distance and high sensitivity (-139dBm) make this module perform better than FSK and GFSK module.
- Lora1276 long distance wireless transceiver module
9.2Excellent
View offer on:
Show more
7
DIYmallDIYmall LoRa32u4 II Lora Development Board Module 915MHZ LiPo SX1276 HPD13 with Antenna for Arduino
Main highlights- What you will get is : 1 X LoRa32u4 II Lora module, 1 X IPEX 1.13 UF.L Antenna, 1 X JST-PH2.0MM-2P plug cable
- Built in 100mA lipoly charger with charging status indicator LED, interface is 2.0mm male
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 915MHz GSM IPX IPEX 1.13 UF.L Antenna Built-in 2DBi, 8cm,Standing wave ratio / S.W.R.≤2.0,Impedance: 50Ω,Max Input power 50W
- 3.3V regulator with 500mA peak current output
9.1Excellent
View offer on:
Show more
8
HiLetgoHiLetgo ESP32 SX1262 LoRa Kit 863-928MHz Bluetooth 4.2+WiFi+LoRa LoRaWAN Wireless Communication Development Board with 0.49" OLED Display 64M Bits Flash Works with Arduino IDE Type C
Main highlights- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
- Microprocessor: ESP32 (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1262;
- Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal 3D antenna, reserved IPEX (U.FL) interface for LoRa use;
- ESP32 SX1262 LoRa Kit with Type - C Interface
- ESP32 SX1262 LoRa Kit 863-928MHz Bluetooth 4.2+WiFi+LoRa LoRaWAN Wireless
9.0Excellent
View offer on:
Show more
9
AdafruitAdafruit (PID 3073 RFM96W LoRa Radio Transceiver Breakout - 433 MHz
Main highlights- Uses the license-free ISM band: "European ISM" @ 868MHz or "American ISM" @ 915MHz up to 100 mW Power Output Capability (power output selectable in software)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa based module with SPI interface
- Packet radio with ready-to-go Arduino libraries
- +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
8.7Very Good
View offer on:
Show more
10
DSD TECHDSD TECH Lora Module SH-B50L RS485/232 to Lora Adapter Lorawan Wireless Transceiver
Main highlights- Lora to RS485/RS232: With this Lora adapter, you can use Lora communication to transfer RS232 or RS485 interface data from your device.Receiving sensitivity is -129dbm, working in 850. 125~930.125MHz band, LoRa spread spectrum technology is suitable for long distance and complex environment communication.
- Industrial Grade: Built-in Semtech LLCC68 Lora chip . Support 5V-24V DC input. DSD TECH also offers free configuration software.
- DSD TECH: DSD TECH focuses on the development of communication connection devices such as USB/Serial/Wireless. We have served more than 100,000 customers in Europe, North America and Japan.
- Customer Support:Offering permanent technical support and a 1-year product replacement service.All questions will be answered for you within 1 business day
- Compatibility:SH-L1A and SH-B50L are two Lora communication products launched by DSD TECH. They can communicate with each other, but not with third-party Lora products for the time being.
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for sx1273 lora module
