10 Best Servo Driver Shield Pca9685 In The Us - Black Friday 2024
Best Choice1
AoicrieAoicrie 5pcs PCA9685 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit, for Robot or for Raspberry pi Shield Module servo Shield
Main highlights- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- Communication Interface: IIC, PCA9685 contain an I2C-controlled PWM driver with a built-in clock.
- 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs.
- 16 Channel PWM/Servo Driver IIC interface-PCA9685 for arduino or for Raspberry pi shield module servo shield.
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HiLetgoHiLetgo TB6612 Mosfet for Arduino Motor Shield Standard IIC I2C TB6612FNG Stepper Motor PCA9685 PWM Servo Driver Shield V2 Robot PWM Uno Mega R3 Replace L293D
Main highlights- H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak)
- Feature: Motors automatically disabled on power-up
- Completely stackable design: 5 address-select pins means up to 32 stackable shields
- Chip: TB6612FNG motor driver chip
- Characteristic: Arduino interface is fully compatible expansion
9.7Exceptional
View offer on:
Show more
3
HiLetgoHiLetgo 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
Main highlights- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- Communication Interface: IIC
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
- 16-way steering gear control
9.6Exceptional
View offer on:
Show more
4
SunFounderSunFounder PCA9685 16 Channel 12 bit PWM Servo Driver for Arduino and Raspberry Pi
Main highlights- Support using only two pins to control 16 free-running PWM outputs – you can even chain up 62 breakouts to control up to 992 PWM outputs
- Contain an I2C-controlled PWM driver with a built-in clock. It means, unlike the TLC5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running
- 5V compliant, which means you can control it from a 3.3V microcontroller (this is good when you want to control white or blue LEDs with 3.4+ forward voltages)
- 3 pin connectors in groups of 4, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
9.5Excellent
View offer on:
Show more
5
Shutao5Pcs PCA9685 16 Channel 12-bit PWM Servo Motor Driver Board I2C interface Controller PCA9685 module Raspberry Pi Shield Module Servo Shield
Main highlights- This is a PCA9685 16 channel I2C communication, built-in PWM driver and a clock.
- PCA9685 module 2-bit resolution for each output - for servos, that means about 4us resolution at an update rate of 60Hz.
- PCA9685 IIC module 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs, which is good when you want to control white or blue LEDs with a 3.4V+ forward voltage
- 3 pin connectors in 4 groups, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 adjacent ones on 0.1"-hole female headers.
- 16 channel PWM module supports using only two pins to control 16 free-running PWM outputs , the 6 address selection pin allows you to hook 62 driver boards on a single I2C bus, with a total of 992 PWM outputs.
9.4Excellent
View offer on:
Show more
6
GODIYMODULESTB6612 Mosfet Stepper Motor PCA9685 Standard IIC I2C PWM Servo Driver Shield V2 for Arduino Robot PWM Mega R3 Replace L293D
Main highlights- The original L293D Motorshield kit is one of our most beloved kits, We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:
- Tested compatible For Arduino UNO, Leonardo, ADK/Mega R3, Due, Diecimila & Duemilanove.
- Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
- Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
9.3Excellent
View offer on:
Show more
7
HUAREWHUAREW PCA9685 16 Channel PWM Servo Driver Board 12 bit IIC Interface Module Compatible with Arduino and Raspberry Pi (2pcs)
Main highlights- Using only two pins, control 16 free-running PWM, so you can wire up to 62 of these on a single I2C bus, a total of 992 outputs
- PCA9685 contain an I2C communication PWM driver with a built in clock, so you do not need to continuously send it signal tying up your microcontroller
- PCA9685 IIC module 5V compliant, you can also control it from a 3.3V microcontroller and still safely drive up to 6V outputs
- Green power indicator lamp, 3 pin connectors in groups of 4, so you can plug in 16 servos at one time(servo motor plug slightly wider than 0.1 inch)
- 12 bit resolution for each output for servos, that means about 4us resolution at 60Hz update rate
9.2Excellent
View offer on:
Show more
8
xicooleeXICOOLEE Motor and Servo Driver HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B, Adopting Dual Chips PCA9685+TB6612, Drive Two DC Motors
Main highlights- 5.Onboard TB6612FNG, dual H-bridge motor driver, continuous driver current from each channel up to 1 A.Notice：Raspberry Pi in the photos is NOT included.
- 4.Onboard PCA9685 chip, adopting I2C communication, built-in PWM driver and a clock, no need to continuously send signals to occupy the resources of the micro-controller.
- 3.It has designed a separate power switch. After power on, the POWER needs to be turned to the ON position. In addition, all the address lines of I2C are led out, and the address can be set by means of the DIP switch.
- 2.This module can drive 2 channels of DC motors and 6 channels of servos at the same time.
- 1.Motor And Servo Driver HAT is an module of DC motor and servo driver specially designed for Raspberry Pi.
9.0Excellent
View offer on:
Show more
9
VKLSVANVKLSVAN 3PCS PCA9685 16 CH Channel PWM Servo Motor Driver Board Controller 12 bit IIC Interface Module for Arduino or Raspberry pi
Main highlights- Supports using only two pins to control 16 free-running PWM outputs ¨C you can even chain up 62 breakouts to control up to 992 PWM outputs.
- PCA9685 Contains an I2C-controlled PWM driver with a built-in clock; Power supply voltage is DC5-10V
- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- 3 pin connectors in groups of 4, so you can plug in 16 servos at one time .
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
8.9Very Good
View offer on:
Show more
10
PartsNovarOfficial IIC I2C TB6612 Mosfet Stepper Motor PCA9685 PWM Servo Driver Shield V2 for Arduino Robot PWM Uno Mega R3 Replace L293D
Main highlights- official IIC I2C TB6612 Mosfet Stepper Motor PCA9685 PWM Servo Driver Shield V2 For Arduino Robot PWM Uno Mega R3 Replace L293D
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for servo driver shield pca9685
