10 Best Plastic Molding Injection Machine In The Us - Black Friday 2024
VACUCU3D A3(297mm×420mm/16.54x11.69in) The Desktop Vacuum Forming Machine Create Prototypes Molds and Casts in Classroom Kitchen Does not Need Any External Device Realize Your idea on Your Desk
9.3 Simple to use9.1 Temperature control8.9 DurabilityWhy we love it
Easy to use and set up quickly.
Rugged and durable design, no external devices needed.
Precise temperature control for accurate results.
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ICZWICZW Vertical Injection Molding Machine Semi-Automatic Pneumatic Plastic Extruder 20g 110V
Main highlights- Note: You need to prepare the air pump, and a 30L 500W or higher power air pump is recommended, and the air pressure requirement is between 0.65-0.85
- Maximum injection amount (theoretical): 0-15g/time
- Heating Temperature: 0-350°C（0~662°F）. The temperature can be adjusted. PEPP temperature 200-240°C, ABS 180-210°C, PS 180-200°C
- Cost saving：This injection molding machine uses a simple hand-disassembled mold to complete the injection molding, and the mold can be replaced to achieve multiple uses of one machine.
- Application: Soft plastics such as PP, PE, ABS are the most suitable, and PS, PA, PET, TPU, and PVC can also be used. Only a small amount of sample is needed for easy extrusion. Capable of test piece production and small batch production.
9.5Excellent
View offer on:
Show more
3
GenericDental Flexible Denture Machine 110V 400W Dental Lab Equipment Electric Hydraulic Press Dentistry Injection System
Main highlights- The Denture Injection Unit consists of a heater and a hot press with Temperature Control, Timers and Electrical Systems.
- Simple Operation: simple operation, time-saving and high casting success rate. Ordinary gear boxes can also be injection molded.
- High Performance and High Efficiency: The denture injection system is easy to operate, has a long service life, low maintenance cost, and high success rate. The Dental laboratory equipment of the denture injection system is essential for dentists.
- Function: Dental Denture Machine is a 400W/110V dental denture laboratory equipment used to make flexible removable partial dentures.
- Easy to use: The denture made by invisible denture injection molding machine is basically free of waste edges, eliminating the need for polishing, and can complete the upper and lower full-mouth injection molding at one time.
9.4Excellent
View offer on:
Show more
4
Brand: David J GingerySecrets of Building a Plastic Injection Molding Machine
Main highlights- molding plastic
9.3Excellent
View offer on:
Show more
5
Hanser Publications45% OffPlastics Injection Molding: Scientific Molding, Recommendations, and Best Practices
9.1Excellent
View offer on:
Show more
6
DYRABRESTKOUGER De-ntal Flexible Denture Machine, 110V 400W Lab Equipment Electric Hydraulic Press Dentistry Injection System, Invisible Denture Injection Molding Machine with Digital Display
Main highlights- ♛ SIMPLE OPERATION - simple operation, time-saving and high casting success rate. ordinary gear boxes can also be injection molded.
- ♛ PRODUCT COMPOSITION - Den-tal denture injection device consists of heater and hot press. Heater: temperature control, timer and electrical system. Hot press: frame, roller, heater, bracket and flask.
- ♛ PACKAGE SIZE - 40*34*57cm (15.7x13.3x22.4 inches), gross weight: 30kg (66.1 pounds).the invisible denture Injection molding machine of the denture injection system is essential for de-ntists.
- ♛ HIGH PERFORMANCE - The denture injection system is easy to operate, has a long service life, low maintenance cost, and high success rate.
- ♛ BASIC INTRODUCTION - Den-tal denture machine is a 400W/110V den-tal denture laboratory equipment used to make flexible removable partial dentures.
9.0Excellent
View offer on:
Show more
7
PreAsionPreAsion 300G Auto Vacuum Material Loader Feeder Suction Feeding Machine Recycling Hopper Plastic Loader
Main highlights- Widely used in the transportation of raw materials in the food, chemical, pharmaceutical, and textile industries, such as: soybean, rapeseed, wheat, plastic particles, ceramic particles, feed particles and other granular materials.
- This automatic suction feeding machine adopts carbon brush motor, high speed, large air volume, fast heat dissipation and high efficiency.Small size and light weight,Directly placed on the dryer or other raw material containers, and automatically complete the feeding.
- The use of stainless steel hopper, stainless steel safety lock and full copper wire motor greatly improves the stability and safety of the machine.
- The machine has an independent filter device to facilitate dust removal and reduce noise, and the filter system can be used for a long time.
- The diameter of the feeding port is 38mm, and the conveying capacity is 300Kg / hr. When the material is insufficient, the machine will automatically alarm and stop working.
8.9Very Good
View offer on:
Show more
8
INTSUPERMAIINTSUPERMAI Hopper Type Plastic Dryer 55lb Granules Dryer 25kg Plastic Dryer Machine Injection Molding Machine Plastic Drying Machine Vertical Plastic Extruder for Drying PP PE ABS PVC, 220V
Main highlights- 【Wide Drying Scope】Our hopper type drying machine can dry the raw materials that are wet due to packaging and transportation,it is also used to remove the moisture on the material surface,suitable for PP,PE,ABS,PVC and other raw materals.
- 【Stainless Steel Material】The contact part of the machine and raw materials is made of stainless steel, durable,and long service life.And stainless steel material does not contain any harmful substances,so you can use our machine safely during working process.
- 【Separate Design for Easy Use】The barrel anf base adopts separate design,convenient for material cleaning and rapid refueling.With elbow type heating tube,our machine can effectively prevent dust accumulation.
- 【High Drying Efficiency】This granules dryer machine can directly add material,shorten dissolution time of raw materials and improve work efficiency.Through the fan supply air,and blowing to the heating tube in the heating cylinder,then controlled by the temperature controller,you can quickly get dried material,greatly meeting your needs.
- 【Accurate Temperature Control】Designed with high-precise temperature regulator and proportional deviation type comtroller,our plastic dryer has hot air distribution and high drying efficiency.The difference is controlled within ±3°,maintaining a stable temperature and eliminating temperature error.
8.8Very Good
View offer on:
Show more
9
INTSUPERMAIINTSUPERMAI Hopper Type Plastic Dryer 110lb Granules Dryer 50kg Injection Molding Machine Hot Air Drying Oven Granule Drying Barrel Vertical Plastic Extruder for Drying PP PE ABS PVC 220V
Main highlights- 【Uniform Hot Air Distribution】Designed with high-precise temperature regulator and proportional deviation type comtroller,the plastic dryer has hot air distribution and high drying efficiency.The difference is controlled within ±3° that maintains a stable temperature and eliminates temperature error.
- 【Stainless Steel Material】Made of stainless steel, the contact part of machine and raw materials is durable, and has long service life.The stainless steel material does not contain any harmful substances,which you can use our machine safely during working process.
- 【Separate Design for Easy Use】The barrel anf base adopts separate design,convenient for material cleaning and rapid refueling.With elbow type heating tube,our machine can effectively prevent dust accumulation.
- 【High Drying Efficiency】This granules dryer machine can directly add material,shorten dissolution time of raw materials and improve work efficiency.Through the fan supply air,and blowing to the heating tube in the heating cylinder,then controlled by the temperature controller,you can quickly get dried material,greatly meeting your needs.
- 【Good Plastic Drying Partner】Our hopper type drying machine can dry the raw materials that are wet due to packaging and transportation,it is also used to remove the moisture on the material surface,suitable for PP,PE,ABS,PVC and other raw materials.
8.6Very Good
View offer on:
Show more
10
JMUPlastvac P7 110V Dental Vacuum Forming Machine, Laboratory Heat Molding Equipment
Main highlights- Wide Range of Uses: can be used to make mouthguard, temporary bridges, laboratory molds, food molds, decorative objects, bath bomb, soap moulds, etc.
- The Plastvac P7 has a universal adapter for round and square sheets of different dimensions, thicknesses and materials.
- The Bio-Art vacuum forming machine made in Brazilian. The Plastvac P7 does not need a special installation, easy to use. It enables two plasticizing processes: Conventional and Rotary.
- Quick and practical, possibility the confection and delivery of sheets to the patient in a single session. On average the payback comes with the production of 30 sheets.
- 1400W powerful motor, it will automatically generate vacuum at the moment of construction.
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for plastic molding injection machine
