10 Best Pei Double Steel Sheet In The Us - Black Friday 2024
Best Choice1
HzdaDeveHzdaDeve 430X430 PEI Build Plate PEO Double Side Sheet Heated Bed Spring Steel Flexible Platform One Side Textured and One Smooth Board for Anycubic Kobra 2 Max for Elegoo Neptune 4 Max/Neptune 3 Max
Main highlights- Special Material: made of Polyethylene which is inherently flame resistant and low in smoke production, high strength and heat resistance.
- Excellent adhesion with one side textured spray PEI and one side diamond smooth surface PEO spring steel plate, it has strong adhesion to adhere the model in a better way. You can use either side.
- Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform.
- Easy for removal: Peel up the top part from the heat bed and bend it to take off models easily as it’s flexible.
- Compatible Printer: The PEI and PEO build plate is for Kobra 2 Max/Neptune 4 Max/Neptune 3 Max.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
IdeaFormer IR3IdeaFormer Double Sided Textured PEI Build Plate 310x310mm, Flexible Spring Steel Sheet Magnetic Build Surface Plate for CR-10, Artillery SW-X1/X2, Anet A8 Plus 3D Printers Print Bed
Main highlights- 【Size】The size of PEI sheet is 310x310mm/12.2x12.2inch. It is suitable for SW-X1/ SW-X2/ CR-10/ CR-10S/ Tevo Tornado/ Nereus/ Anet A8 Plus/ E12,or other samed hot bed size model. (Please measure your hot bed and make sure it is the right size for you)
- 【Quality Service】If you have any questions about the product or need technical support, please leave us a message and we will reply within 24 hours.
- 【High Durability】The PEI heated bed can withstand the countless thermal cycles that the 3D printing bed goes through from print to print. The magnetic sticker can withstand the high temperature of 80°C, and the PEI coating can withstand the high temperature of 260°C.
- 【Double-sided textured PEI+Magnetic printing base plate】Made of high-quality spring steel and powder-coated PEI, double-sided PEI coating, both front and back can be printed; PEI surface increases hardness, the coating is not easy to fall off and does not produce air bubbles; print when using Works well and removes the model easily by bending or popping.
- 【Compatible Filaments】Almost all filaments of PEI are compatible, work well with PLA/ABS/PETG/TPU/Nylon and many other filaments, PETG can print well, but the bed temperature needs to be at 80 Around -85°C, the highest temperature can reach 120°C.
9.8Exceptional
View offer on:
Show more
3
AJOYIBAJOYIB Flexible Steel Build Surface with Adhesive Double Side PEI Sheet & Magnetic Base Compatible with Lulzbot Taz 5/6 Anet A8 Wanhao Duplicator i3 V1 / Plus 3D Printer Hot Bed
Main highlights- Great quality: This product consists of a magnetic base and a flexible stainless steel which with double side PEI surface. Can provide good adhesion for printing consumables. When printing PLA filaments, the temperature of the hot bed is set at 60°C, and PETG needs to be set at 85°C
- Great magnetism: The rubber on the bottom has high-quality magnetism and can still maintain strong magnetism when heated to 120℃.
- Easy to use: Peel off the protective layer of the bottom tape, glue the magnetic base on the heat bed, the flexible stainless platform can be easily attached and removed.
- Caution: Because the thickness of the product itself must be re-leveling after attaching this item to avoid damage the surface. It’s easy to remove the printing model when the heat bed temperature drops. Please leave a little gap like 0.1-0.2mm when leveling the platform which can offer you a better experience.
- Applicable 3D printer: 220*220mm (8.66*8.66inch) size which is applicable with Lulzbot Taz 6 / Lulzbot Taz 5 / Tevo Tornado / Hictop Prusa i3 DIY / Anet A8 / Cocoon 3D Printer / Wanhao Duplicator i3 V1 / Plus and other 3D printers has a same size hot bed.
9.6Exceptional
View offer on:
Show more
4
ENOMAKERENOMAKER Ender 3 PEI Bed Plate Spring Steel Sheet Magnetic Mat Double Side Smooth and Textured Flexible Build Surface for Creality Ender 3/Pro/V2/S1/Neo, Ender 5/Pro, CR-20/Pro,K1 Platform, 235x235mm
Main highlights- 【Magnetic, Flexible, Removable Steel Flex PEI Plate】It can stick to magnetics very well. High strength and heat resistance. Suitable for Creality Ender 3/ Ender 3X/Ender 3 Neo/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender-3 S1/Ender-3 S1 Pro/Ender 5/Ender 5 Pro,CR20/pro,CP-01,Creality K1 etc.
- 【Double Sided Texture + Smooth PEI Sheet】One side frosted, one side smooth, two kinds of surface to meet your different printing needs！Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.
- 【Bends thousands of Times without Deformation】The flex spring steel PEI bed is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- 【Bend to Remove Models】No more tape, no more glue, no more shovel, and release your printing anxiety.
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3d print bed goes through from print to print.
9.5Excellent
View offer on:
Show more
5
JusnboirPEI Sheet Double Side Textured Build Plate Mat Spring Steel Magnetic Flexible Heated Bed 220x220mm Platform for The Anet A8, Maker Select Plus, Wanhao Tronxy xy-2, and P802M 3D Printers Printer
Main highlights- Wide Application - The size of pei sheet 220x 220 mm, not warped. It is applicable with 3D printers such as MK2/MK2A, Anet A8, Anet A6, Reprap, Mendel, Wanhao Duplicator i3, Monoprice Maker, not suitable for Ender 3, 5 etc. Please confirm your printer platform size before ordering. If your 3D printer with 220x220mm heat bed platform, then this PEI sheet is compatible with your 3D printer.
- Satisfaction Guarantee - As a specialized pei printing plate manufacturer, we promise that we will only supply quality products to customer. If you encounter any problem when using this pei plate, please contact us directly. We will reply you within 24 hours. 30 days money back guarantee with 1 year additional replacement warranty.
- Pei Build Plate - Our 3d printing plate can be placed on any existing magnetic base. It is resistant to 200℃ and the magnetic bottom sheet is not suitable for high temperature printing applications above 80℃. Compatible with PLA / PETG / PEEK / ABS and other filaments.
- Easy To Remove Model - This surface with excellent adhesion, easy to paste and remove, no glue or shovel required. When the build surface cools down to room temperature, models can be removed by slightly bending the steel plate.
- Double Sided Design - The Pei Foil consists of 2 parts, a flexible steel platform with double-textured Pei surface and a magnetic print bed with adhesive on the back. Simply stick the PEI magnetic sheet onto your heated bed, then place the steel platform with PEI coat on top.
9.2Excellent
View offer on:
Show more
6
CrealityOfficial Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Main highlights- 【Wide Application】The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- 【Simple Installation】Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again
- 【Quality security】Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200°C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70°C
- 【Easy Adhere And Remove】 Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off
- 【After Sales Support】We provide professional after-sales service. Please kindly contact us(seller) via "ask a question" to find us directly cause our customer service will respond to you within 24 hours no matter what the question
9.1Excellent
View offer on:
Show more
7
CCTREECCTREE Double Side Textured PEI Sheet+Smooth PEO Chameleon Spring Steel Sheet 235 * 235mm, Flexible Print Build Plate with Magnetic Bed for Creality Ender 3/Pro/V2/Neo, Ender 5/Pro 3D Printers
Main highlights- 【Strong magnetic adhesion】The powerful magnetic stickers maintain their magnetism even at high temperatures, ensuring printing stability.
- 【Precise Size】Bed sheet dimensions: 235mmx235mm, perfectly fit for Creality Ender 3/ Ender 3X/Ender 3 Neo/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender-3 S1/Ender-3 S1 Pro/Ender 5/Ender 5 Pro,CR20/pro,CP-01, Mega Pro, Kobra, Aquila/C2/S2/X2, Odin-5 F3, Neptune X/2/2S, Mingd D2, LK4 / LK4 Pro, B1, A10M/A10T printers
- 【High-temperature compatibility】PEO ≤ 120℃, recommended for printing PLA, PETG, and TPU. PEI ≤ 260℃, recommended for printing PLA, ABS, ASA, PETG, TPU, PC, PA, etc. Magnetic base ≤ 110℃.
- 【Double Sided PEO PEI Build Plate and Magnetic Bed】Both the colorful chameleon PEO and golden PEI surface feature high-adhesion textures to prevent warping, with PEO diamond also offering a unique texture on the model’s bottom surface. if you have an Ender 3 V3/V3 SE/V3 KE, remember that you will need to use your keys to remove the back stand-offs on the main plate so that this will lay flat or as flat as you can get it on those printers.
- 【Bend to Remove Models】The selected spring steel bed plate features high flatness and elasticity, ensuring easy model removal and resistance to deformation, even after repeated bending. No tape, glue, or shovel is needed, reducing printing anxiety
9.0Excellent
View offer on:
Show more
8
AsbrotAsbrot Prusa I3 MK4 MK3 MK3S+ PEI Build Plate Double Sides Fine Powder Textured 3D Printer Platform Flexible Removal Spring Steel Sheet, 254x241mm/ 10x9.5inch
Main highlights- No Need for Solid Adhesive Paste: Unlike traditional build surfaces, this Steel Plate eliminates the need for solid adhesive paste. Its powder-coated texture offers sufficient grip for your prints, making setup and maintenance hassle-free. Simply print directly onto the plate for consistent and reliable results without any additional adhesives.
- High-Quality Steel Plate: Elevate your 3D printing experience with the Prusa I3 MK3, MK4, and MK3S+ Steel Plate. Measuring 254x241mm, this double-sided plate boasts a fine powder-coated texture for optimal adhesion and printing results.
- Exceptional Adhesion: With its fine powder-coated texture, this steel plate offers exceptional adhesion for various filament types, including PLA, ABS, PETG, and more. Say goodbye to warping and failed prints as the strong adhesion keeps your prints securely in place throughout the printing process.
- Durable and Resilient: Designed for longevity, this Steel Plate is highly durable and resilient, capable of enduring printing cycles without deterioration. Its strong elasticity ensures that it maintains its shape and properties over time, providing reliable printing results for an extended lifespan.
- Built for High Temperatures: Engineered to withstand high temperatures, this Steel Plate ensures stable printing conditions, even for demanding prints. Its robust construction provides reliable performance, even under intense heat, allowing for consistent and precise printing every time.
8.9Very Good
View offer on:
Show more
9
FTVOGUE3D Printer Steel Plate Double Side PEI Flexible Spring Steel Plate Magnetic Build Plate for VORON, 200 X 200mm
Main highlights- Support Double Sided Printing: This spring steel plate has double sided PEI coating, both sides can be printed, just put it on the heated bed, peel off the protective film and print directly without glue.
- Quality Material : This spring steel plate is made of spring steel and soft magnetic, which is very and wear resistant.
- PEI Strong Surface Adhesion: PEI surface is very good at bonding all kinds of printing wire, especially PLA and ABS, which are printed without warping and have high adhesion to achieve higher printing success rate, exquisite and beautiful.
- Industrial supplies, industrial control, additive manufacturing products, 3D printers accessories
- Easy To Install: The magnetic base is glued to the build plate by peeling off the backing paper and then aligning the plate. The side with PEI is printed upwards. Please remove the protective film from the surface before printing.
- 3 In 1 Build Plate: This build plate is made of a customized designed PEI material that makes your prints easy to adhere to the print surface, flexible, and removable.
8.6Very Good
View offer on:
Show more
10
CCTREECCTREE Double Sided Textured PEI Sheet+Smooth PEI Build Plate for Prusa i3 MK3, PEI Spring Steel Sheet Flexible Print Bed Removable Surface Platform for 241 * 254 mm Size 3D Printers
Main highlights- 【Excellent adhesion for first printing layer】The model can be firmly attached to the surface of the print bed. Easily printed even for a newbie. The Textured PEI spring steel flexible build plate (241x254mm) has a good adhesive. It even can stick well without heating the platform, no glue is needed. Please let the build plate cool down before removing the model to avoid damaging the coating
- 【Double Sided Smooth & Textured PEI Build Plate Design】One side is smooth PEI print bed surface, the bottom of the printed model is smooth, and the model is easy to remove and clean. The other side is the PEI frosted surface plate, presenting the frosted sticker surface with a distinctive frosted touch, providing greater adherence to the model and prints without warping
- 【Compatible 3D Printers】he double-sided Smooth & Textured PEI bed suitable for 3D printers with 241x254mm platform size, such as suitable for Prusa i3 MK3 /S MK2.5/S
- 【Compatible 1.75mm Filaments】The print bed surface is resistant to high temperatures of 130℃. It behaves as most PEI would and works great with PLA, and ABS, as well as many other filaments
- 【 Easy to Remove and use】The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness. Made of high-quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, and then the print bed leveling will automatically go on while the machine powered on
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for pei double steel sheet
