10 Best Pca9685 Servo Drive In The Us - Black Friday 2024
Best Choice1
FainWanFainWan 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module Compatible with Ar-duino Robot
Main highlights- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- Communication Interface: IIC
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
- 16-way steering gear control
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
AlinanAlinan 4pcs PCA9685 16 Channel 12 Bit PWM Servo Motor Driver Board I2C IIC Module IIC Interface
Main highlights- 【The PCA9685 Chip】: The PCA9685 chip is wrapped in the center of the board, PCA9685 contain an I2C-controlled PWM driver with a built-in clock. 16 Channel PWM/Servo Driver IIC interface-PCA9685 for shield module servo shield
- 【Specification】: Voltage: DC5-10V power supply, Frequency: 40-1000Hz; Channel number: 16 channel; Resolution: 12 bit; Voltage: DC 5-10V, Size: Approx. 60 x 25 mm/ 2.36 x 0.98 inch
- 【Easy to Use】: supports using only 2 pins (6 address select pins) to control 16 free-running PWM outputs, you can control the 16 way servo motor, so you can wire up to 62 of these on a single I2C bus to control up to 992 PWM outputs. 3 pin connectors in groups of 4, so you can plug in 16 servos at one time
- 【5V Compliant】: It is 5V compliant, which means you can control it from a 3.3V micro controller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
- ★All PWM output lines have a 220 ohm series resistor protection and can easily drive LED. 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
9.8Exceptional
View offer on:
Show more
3
HiLetgoHiLetgo 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
Main highlights- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- Communication Interface: IIC
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
- 16-way steering gear control
9.7Exceptional
View offer on:
Show more
4
Teyleten Robot15% OffTeyleten Robot PCA9685 16 Channel 12 bit PWM Servo Motor Driver I2C IIC Module for MG90S SG90 MG995 Compatible with Arduino Raspberry Pi (2pcs)
Main highlights- Using only two pins, control 16 free-running PWM outputs
- Size: 60*25mm/2.36"*0.98"
- I2C input, control 16 PWM output, you can control the 16 way servo motor.
- Frequency: 40-1000Hz;Channel number: 16 channel.;Resolution: 12 bit;Voltage: DC 5-10V
9.4Excellent
View offer on:
Show more
5
HUAREWHUAREW PCA9685 16 Channel PWM Servo Driver Board 12 bit IIC Interface Module Compatible with Arduino and Raspberry Pi (2pcs)
Main highlights- Using only two pins, control 16 free-running PWM, so you can wire up to 62 of these on a single I2C bus, a total of 992 outputs
- PCA9685 contain an I2C communication PWM driver with a built in clock, so you do not need to continuously send it signal tying up your microcontroller
- PCA9685 IIC module 5V compliant, you can also control it from a 3.3V microcontroller and still safely drive up to 6V outputs
- Green power indicator lamp, 3 pin connectors in groups of 4, so you can plug in 16 servos at one time(servo motor plug slightly wider than 0.1 inch)
- 12 bit resolution for each output for servos, that means about 4us resolution at 60Hz update rate
9.3Excellent
View offer on:
Show more
6
YELUFT2pcs PCA9685 16 Channel PWM Servo Motor Driver Board I2C IIC Interface 12 Bit Resolution for Arduino, Raspberry Pi, Robot
Main highlights- Powerful protection: Place a large capacitor on the V+ line. The large peripheral input voltage depends on this 10V 1000μf capacitor. Place a 220 ohm series resistor on all PWM output lines to protect them and easily drive LEDs
- I2C Communication: When your microcontroller chip does not have enough PWM output pins, as long as your main controller chip has I2C communication, you can let the main controller chip communicate with PCA9685 to realize multiple servos control at the same time. PCA9685 uses I2C communication with a built-in PWM driver and clock. This means that you don't need to constantly send signals to occupy your microcontroller
- Huge Resource Output: 6 address selection pins allow you to hang 62 driver boards on a single I2C bus, with a total of 1.6KHz adjustable frequency and 992 PWM outputs, ready to output 12-bit resolution for stepper motors, configurable Push-pull output or open-circuit output, the output enable pin can quickly disable all outputs
- Compatibility: Compatible with 5V, which means you can use a 3.3V microcontroller to control and drive up to 6V output, you can also use 3.4V + positive voltage to control the white or blue indicator light
- Can plug in 16 servo motors: green power indicator light, 4 sets of 3-pin connectors to facilitate you to plug in 16 servo motors at one time, the plug of the servo motor is slightly wider than 0.1, so 4 paired 0.1 connectors can be placed
9.2Excellent
View offer on:
Show more
7
AITIAOAITIAO 3Pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Interface Module PCA9685 Controller Module for Robot Raspberry pi
Main highlights- Supports using only two pins to control 16 free-running PWM outputs, you can even chain up 62 breakouts to control up to 992 PWM outputs.
- PCA9685 Servo Driver: Power supply voltage is DC5-10V; Communication Interface: IIC; PCA9685 Contains an I2C-controlled PWM driver with a built-in clock.
- PCA9685 Driver Controller is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs(it is good when you want to control white or blue LEDs with a 3.4V+ forward voltage)
- 3 pin connectors in 4 groups, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 adjacent ones on 0.1"-hole female headers.
- 12-bit resolution for each output,for servos, that means about 4us resolution at an update rate of 60Hz.
9.1Excellent
View offer on:
Show more
8
VKLSVANVKLSVAN 3PCS PCA9685 16 CH Channel PWM Servo Motor Driver Board Controller 12 bit IIC Interface Module for Arduino or Raspberry pi
Main highlights- Supports using only two pins to control 16 free-running PWM outputs ¨C you can even chain up 62 breakouts to control up to 992 PWM outputs.
- PCA9685 Contains an I2C-controlled PWM driver with a built-in clock; Power supply voltage is DC5-10V
- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- 3 pin connectors in groups of 4, so you can plug in 16 servos at one time .
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
9.0Excellent
View offer on:
Show more
9
ATNSINCATNSINC 3PCS PCA9685 16 Channel PWM Servo Motor Drive IIC Interface Module 12-Bit for Arduino Robot and for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
Main highlights- The PCA9685 chip is wrapped in the center of the board. Solder jumpers for the 6 address select pins.
- Size: Approx. 25*61mm/0.98*2.4in; 16-way steering gear control; Voltage: DC5-10V power supply.
- Package Included: 3 * PWM Servo Motor Driver.
- Green power-good LED; Reverse polarity protection on the terminal block input; Terminal block for power input (or you can use the 0.1" breakouts on the side).
- Communication Interface: IIC.
8.9Very Good
View offer on:
Show more
10
AITRIPPCA9685 16 CH 12Bit PWM Servo Motor Driver Board Controller IIC Interface for Arduino Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ and Robot (2pcs)
Main highlights- Supports using only two pins to control 16 free-running PWM outputs – you can even chain up 62 breakouts to control up to 992 PWM outputs.
- Contains an I2C-controlled PWM driver with a built-in clock. It means, unlike the TLC5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running!
- 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs, which is good when you want to control white or blue LEDs with a 3.4V+ forward voltage
- 3 pin connectors in 4 groups, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 adjacent ones on 0.1"-hole female headers.
- 12-bit resolution for each output - for servos, that means about 4us resolution at an update rate of 60Hz.
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for pca9685 servo drive
