10 Best Oled for Raspberry Pi In The Us - Black Friday 2024
Best Choice1
waveshareWaveshare 1.51inch Transparent OLED 128×64 Resolution Compatible with Raspberry Pi 4B/3B+/3A+ Embedded Independent Driver Chip SPI/I2C Interfaces Light Blue Color Display
Main highlights- The program defaults to SPI mode. If you need to switch the mode, please modify DEV_Config.h. For details, please refer to the program description - bottom hardware interface - interface selection.
- Provide online user manual, please check the manual carefully before using!
- OLED transparent module, full viewing angle
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
- Adopts 4-wire SPI and I2C interface, better compatibility, fast data rate
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
wavesharewaveshare 1.27inch RGB OLED Display Module, 128x96 Pixels 262K Colors OLED Display,Compatible with Raspberry Pi/Arduino/STM32,SSD1351 Driver,SPI Interface
Main highlights- SPI interface, minimizes required IO pins
- Embedded SSD1351 Driver Chip
- Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
- 262K colors, clear and colorful displaying effect
- 128×96 Resolution 1.27inch RGB OLED Display Module
9.6Exceptional
View offer on:
Show more
3
HosyondHosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi(Blue and Yellow)
Main highlights- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- It compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
9.3Excellent
View offer on:
Show more
4
wavesharewaveshare 2.42inch OLED Display Module 128×64 Resolution for Raspberry Pi/forArduino/STM32/ESP32/Jetson Nano, with SSD1309 Driver Chip SPI / I2C Communication 3.3V / 5V, White Display Color
Main highlights- Ultra-narrow bezel, conpact size, with onboard voltage translator
- Compatible with Raspberry Pi, Arduino, STM32, ESP32, Jetson Nano, etc. Comes with online development resources.
- Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
- 3.3V / 5V Operating voltage; 4-wire SPI (default) / I2C Communication Interface
- 2.42inch OLED Display Module, Embedded SSD1309 driver chip, SPI / I2C Communicatio, White Display Color
9.2Excellent
View offer on:
Show more
5
wavesharewaveshare 1.5inch RGB OLED Display Module for Raspberry Pi/Jetson Nano/Arduino/STM32, 128x128 Pixels,16-bit High Color (65K Colors) SPI Interface
Main highlights- Viewing angle: >160°. Operating voltage: 3.3V / 5V. Dimension: 44.5 x 37 (mm).
- This is a general 1.5inch RGB OLED display module, 128x128 pixels, 16-bit high color (65K colors),clearly displays colorful images, with embedded controller, communicating via SPI interface.
- Driver: 1351. Interface: 4-wire SPI, 3-wire SPI. Display color: RGB, 65K colors. Resolution: 128x128.
- 128x128 high resolution, 65K colors, clearly displays colorful images. Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor.
9.0Excellent
View offer on:
Show more
6
iPistBitiPistBit 5 Pcs 0.91 Inch I2C OLED Display Module, 128x32 Pixel SSD1306 Luminous OLED Screen Board Compatible with Arduino Raspberry Pi ESP32 (Blue)
Main highlights- The module pins are soldered and housed in a small bag to prevent them from falling off during transportation.
- The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
- The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports.
- Raspberry Pi screen module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module, users can create fonts using font generation software.
- 0.91 inch OLED display with a resolution of 128 x 32 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.06W when the screen is fully lit.
8.9Very Good
View offer on:
Show more
7
XYGStudyXYGStudy 2.23 inch OLED Display HAT for Raspberry Pi 2B/3B/4B/Zero/Zero W Jetson Nano 128×32 Pixels SPI/I2C Interface
Main highlights- Trying to add a control interface for your Pi? This compact display would be the ideal choice.
- This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Part Number: 2.23inch OLED HAT
- 2.23inch OLED display HAT for Raspberry Pi, 128×32 pixels, SPI/I2C interface
8.6Very Good
View offer on:
Show more
8
WonrabaiTriple OLEDs/LCD HAT for Raspberry Pi 5/4B/3B+/3B/Zero W/Zero 2W, Onboard 2inch IPS LCD Main Screen 240x320 SPI Interface and Dual 0.96inch OLED Secondary Screens 128x64 I2C Interface
Main highlights- This is the Triple OLEDs/LCD HAT for Raspberry Pi. Onboard 2inch IPS LCD Main Screen and Dual 0.96inch Blue OLED Secondary Screens, With 40PIN GPIO Header, Compatible With Raspberry Pi Series Boards
- Onboard 4x user-defined keys for extended applications
- Dual 0.96inch OLED secondary screens with built in SSD1315 driver chip, I2C interface communication, blue display color, 128×64 resolution, can be used to display key informations, status indicator messages or small graphics
- Comes with online development resources and manual (Raspberry Pi/VisionFive2/Arduino/STM32, etc.) , pls check the description below.
- 2inch IPS LCD Main Screen with built in ST7789VW driver chip, SPI interface communication, wide viewing angle, supports 262K color display, 240×320 resolution
8.5Good
View offer on:
Show more
9
HosyondHosyond 5 Pcs 0.91 Inch I2C OLED Display Module IIC OLED Screen DC 3.3V~5V Compatible with Arduino Raspberry PI (White Display Color)
Main highlights- Working power:3.3-5v, Operating temperature: -40 - 85 ℃.
- What will you get: there are 5 pieces OLED display module OLED display module for you.
- Resolution: 128 x 32 0.91 Inch OLED display, no need backlight, self-illumination, Display Color: White.
- Low power consumptio; SSD 1306 oled display; I2C oled display, IIC (I2C communications) simplifies connection.
- Compatible with Arduino nano, R3 board, Raspberry Pi 4B/3B+/3B/2B/Zero,ESP8266, ESP32, STM32, etc.
8.4Good
View offer on:
Show more
10
iPistBitiPistBit 5 Pcs 0.96 Inch OLED Display Module, 128x64 Pixel SSD1306 Luminous I2C OLED Display Board Compatible with Arduino Raspberry Pi ESP32(Blue)
Main highlights- The module pins are soldered and housed in a small box to prevent them from falling off during transportation. The OLED glass surface is covered with a removable transparent scratch-resistant film.
- The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
- The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports. The I2C address can be changed for easy compatibility with different devices.
- Raspberry Pi screen module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module; users can create fonts using font generation software.
- 0.96 inch OLED display with a resolution of 128 x 64 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.08W when the screen is fully lit.
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for oled for raspberry pi
