10 Best Oled Display Arduino Ssd1306 In The Us - Black Friday 2024
Best Choice1
AITRIPAITRIP 10 Pieces 0.96 Inch OLED I2C IIC Display Module 12864 128x64 SSD1306 Mini Self-Luminous Display Board Compatible with Arduino/Raspberry PI -White
Main highlights- Embedded driver IC: Communication: I2C/IIC Interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star； Instructions : https://wiki.52pi.com/index.php?title=S-0005
- Applications: MP3, MP4, watch；Head-mounted displays；Meters and other intelligent instruments；IT is compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc
- 128 X 64 PIXELS:Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software.
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC；Power consumption: 0.04W during normal operation, full screen lit 0.08W
- 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects；Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HosyondHosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi (White)
Main highlights- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- It compatibles with Arduino Nano, R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
9.5Excellent
View offer on:
Show more
3
Teyleten RobotTeyleten Robot 0.96 inch LCD OLED Display Board Module 12864 128X64 IIC I2C SSD1306 Driver 4 Pins for Raspberry Pi Arduino(5pcs, White Light)
Main highlights- Voltage: 3V ~ 5V DC
- Ultra-low power consumption: full screen lit 0.08W
- There is also a removable transparent film on each OLED glass surface for scratch resistant protection until use.
- Pins has been soldered,comes in a small box to prevent it from being dropped during transportation
- Pin Definition: VCC,GND,SCL, SDA
9.4Excellent
View offer on:
Show more
4
ideasparkideaspark 3Pcs 0.96 Inch OLED Display 3-Colors 128x64 SSD1306 SPI I2C IIC Serial LCD Screen Module Board with 4 Pins Soldered and 10 Dupont Cable Work Great with Arduino for Raspberry Pi
Main highlights- Resolution: 128 x 64, View angle: > 160°,Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Package List: 1 x Yellow-Blue OLED display,1 x White OLED display,1 x Blue OLED display,10 x Female to Female Dupont Cable,1 x Storage Box
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- Embedded Driver IC: SSD1306.Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. Work great for Arduino UNO and Mega, for Raspberry pi, 51 MCU, STM 32,etc
9.2Excellent
View offer on:
Show more
5
iPistBitiPistBit 5 Pcs 0.91 Inch I2C OLED Display Module, 128x32 Pixel SSD1306 Luminous OLED Screen Board Compatible with Arduino Raspberry Pi ESP32 (Blue)
Main highlights- The module pins are soldered and housed in a small bag to prevent them from falling off during transportation.
- The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
- The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports.
- Raspberry Pi screen module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module, users can create fonts using font generation software.
- 0.91 inch OLED display with a resolution of 128 x 32 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.06W when the screen is fully lit.
9.1Excellent
View offer on:
Show more
6
Teyleten RobotTeyleten Robot 0.91 inch OLED LCD Display Module SSD1306 IIC 128x32 LCD OLED Screen 3.3V~5V 4PIN for Arduino White 5PCS
Main highlights- Resolution: 128 x 32 IIC interface Display
- Pin Description: GND: Power Ground VCC: Power + (DC 3.3 ~5v) SCL: Clock Line SDA: Data Line
- OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
- Driver IC: SSD1306
8.9Very Good
View offer on:
Show more
7
iPistBitiPistBit 5 Pcs 0.96 Inch OLED Display Module, 128x64 Pixel SSD1306 Luminous I2C OLED Display Board Compatible with Arduino Raspberry Pi ESP32(Blue)
Main highlights- The module pins are soldered and housed in a small box to prevent them from falling off during transportation. The OLED glass surface is covered with a removable transparent scratch-resistant film.
- The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
- The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports. The I2C address can be changed for easy compatibility with different devices.
- Raspberry Pi screen module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module; users can create fonts using font generation software.
- 0.96 inch OLED display with a resolution of 128 x 64 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.08W when the screen is fully lit.
8.8Very Good
View offer on:
Show more
8
GeeekPiGeeekPi 2Pcs OLED Display Module I2C IIC 128X64 Pixel 0.96 Inch Display Module Yellow Blue Two-Color Display Compatible with Raspberry Pi Arduino 51 Series MCU STM32 R3 and Mega
Main highlights- Support I2c IIC communication Protocol,the IIC address can be changed,it is convenient to use with different machines .
- Pin Definitions: GND, VCC, SCL, SDA;Pins: 4 pins
- Package includes:2 x 0.96 inch OLED Display kits (Yellow Blue Two-Color), 8x Male to Femal Dupont Wire, 8x Female to Female Dupont Wire
- High resoluton: 128*64 pixels(approx)
- Fully compatible with Raspberry Pi, Arduino, 51 series, MSP430 Series, STM32/2, CSR IC, etc.
8.6Very Good
View offer on:
Show more
9
DIYmallDIYmall 0.96 Inch Blue Yellow OLED Display Module I2C Serial 128x64 SSD1306 IIC Screen Board for Arduino Raspberry Pi 51 Msp420 STIM32 SCR Micro:bit (Pack of 2pcs)
Main highlights- What you will get is: 2 x 0.96inch oled blue&yellow
- The IIC address can be changed, it is convenient to use with different machines; Four square holes are easy to install
- How to use 2pcs OLED display modules in the same time, pls check this vedio for reference: https://www(dot)youtube(dot)com/watch?v=yef23sJjiU0
- Compatible with MMDVM，Pi-Star, and it works with raspberry pi. https://tech(dot)scargill(dot)net/ssd1306-with-python/
- 0.96 OLED connects easily using I2C over four lines (power, ground, data, and clock) at address 0x3c
8.5Good
View offer on:
Show more
10
Teyleten RobotTeyleten Robot 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 - White Light
Main highlights- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for oled display arduino ssd1306
