10 Best Ne555 Cd4017 Lights Diy Kit In The Us
Best Choice1
EC BuyingEC Buying 5Pcs DIY SMD SMT Component Welding Practice Board Soldering Skill Training Board LED Flow Light Kit CD4017 NE555 Electronic DIY Board for Competition
Main highlights- Three columns of components on the left and right are used for welding practice, and each column has test points
- The commonly used SMD components are used
- The circular circuit in the middle is a water lamp circuit, composed of CD4017, NE555, and light-emitting diodes. It can work after being powered on after welding without any errors
- The back of the circuit is also used, with a scale for conveniently measuring components. There are examples of PCB wires to facilitate PCB design and use
- The PCB board is reasonably designed, without burrs, and has a size of 89mm * 58mm/3.5inch * 2.28inch, which can be packed in a pocket
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
plplaaooWater Flowing LED Light,Water Flowing Light Module, 2 PCS Ne555 cd4017 LED Chaser Water Flowing Light Module DIY Kit, Electronic Circuit, Easy to Install, Electronic Components, led circuit board
Main highlights- The self-excited multivibrator with NE555 as the core, the power supply charges capacitor C1 through R2, R3, R4. When C1 starts charging, the 2 pin of NE555 is still at low level, so the output pin 3 is high level. When the power supply is charged to the
- The charging time is: 0.695 (R2+R3+R4)C1, the discharge time is: 0.695 (R4+R3)C1, the R4 can be adjusted to control the output frequency of the oscillator, and the clock oscillation signal of NE555 is continuously added to the 14th pin of CD4017.
- Ten LEDs are connected to the 10 outputs of the CD4017. When the 10 outputs of the CD4017 alternately generate a high level under the action of the clock signal, D1--D10 are sequentially illuminated to form a water-light effect.
- Mainly composed of clock generation circuit and decimal counter circuit.
- Adjust the R4 to adjust the flow speed of the LED light.
9.5Excellent
View offer on:
Show more
3
DORHEADORHEA 3 Set Electronic Flashing Lights Practice Board LED NE555 CD4017 IC LED Electronic Lights Kits Red Blue Dual-Color DIY Kit Strobe Electronic Suit Flashing Lights Components DIY
Main highlights- This suite adopts simulation light circuit made with NE555 and CD4017, the blue LED and red LED flashed alternately according to the pulse. The multivibrator composed of NE555 will have a certain frequency of oscillation signal send to CD4017 decimal counter/pulse distributor, in order to count.
- This is a very interesting circuit for simulating the visual effects of warning lights, blue and red lights flash alternately according to the pulse respectively. This kit is simple to assemble, suitable for electronics enthusiasts and students to practice. Design optimized for training, it adopts 1.6mm electric board and nice layout of the components.
- The circuit working voltage: DC9-12V. The product does not include battery. It is simple to make, has obvious effect and is interesting. The circuit can be used for electronic toys, art lighting, LED billboards ,ect.
- Specially designed for the training, cost-effective, red diodes and blue diodes can be opened with wire connections to expand the lamp distance, the original board number and model on the circuit board, the right seat can be installed.
9.4Excellent
View offer on:
Show more
4
EC BuyingEC Buying 2Pcs SMT SMD Component Welding Practice Board Rectifiers CD4017 NE555 Soldering Skill Training Board Flowing Water Light Kit DIY Electronic Kit Mini Practice Board Easy SMD
Main highlights- Three columns of components on the left and right are used for welding practice, and each column has test points
- The welding practice board for SMD components adopts double-sided components, and the double-sided SMD practice has a high board occupancy rate and good cost performance
- The product is a loose part with a circuit board: the PCB circuit board is equipped with all components, and you need to assemble and debug it yourself
- The circular circuit in the middle is a water lamp circuit, composed of CD4017, NE555, and light-emitting diodes. It can work after being powered on after welding without any errors
- The PCB circuit design is reasonable, without burrs, and is small in size, which can be packed in a pocket
9.3Excellent
View offer on:
Show more
5
Balance World IncNE555 & CD4017 LED Light Chaser Sequencer Follower Scroller Module DIY Kit Red
Main highlights- output terminal to produce a high level in the clock signal under the action of rotation, D1 - D10 are sequentially lit, thereby forming a flowing light effect. Adjust VR1 to adjust the flow rate of the LED lights.
- The kit mainly by the clock generation circuit and decimal counter circuit constitute By NE555
- Supply Voltage :3 - 4 .5 V PCB size: 88 * 25mm PCB thickness: 1.0mm
- Package Included: 1PC*NE555+CD4017 LED Light Water DIY Kit Electronic Suite Lamp Module Red
9.2Excellent
View offer on:
Show more
6
DEVMODEVMO NE555+CD4017 Running LED Flow LED Light Electronic Production Suite Control Board Module Capacitor Oscillator Clock Siganal DIY Kit DIY Kit
Main highlights- ★You can adjust the flow rate adjustment R4 LED lights .
- ★Supply Voltage :2.5 - 14 .5 V
- ★Package included: 1* NE555+CD4017 Flow LED Light Electronic Production Suite
- ★NE555+CD4017 Running LED Flow LED Light Electronic Production Suite DIY Kit
- ★Board size： 53mm*19mm
9.0Excellent
View offer on:
Show more
7
MONBLAMONBLA 2pcs NE555 CD4017 LED Flash Light Turntable Electronic Production DIY Kit Electronics DIY for Students
Main highlights- Supply voltage: 3-5V
- LED Flash Light Turntable Electronic Production DIY Kit
- Kit Model: LUCKY-10
- A good DIY kit for Students Electronics Learning Study
8.7Very Good
View offer on:
Show more
8
TreedixTreedix NE555+CD4017 LED Chaser LED Running Light Flow light kit Capacitor Oscillator Clock Siganal Electronic Production DIY kits
Main highlights- With NE555 as the core of self-excited multi-tuned oscillator, the power supply charges the capacitor C1 through R2, R3 and R4
- When C1 starts to charge, pin 2 of NE555 is still at low level, so output pin 3 is high. When the power supply is charged to 2/3 of the power supply voltage through R2, R3 and R4, the output pin 3 level changes from high to low, and the discharge tube in NE555 closes.
- The charging time is: 0.695 (R2+R3+R4) C1, the discharging time is: 0.695 (R4+R3) C1, adjust R4 to adjust the flow rate of LED lights
- Note: This kit needs to be soldered by yourself
- Capacitor C1 discharges through R4, R3, and pin 7 of NE555
8.6Very Good
View offer on:
Show more
9
AueabcSMD NE555 CD4017 Rotating Flashing Water Lamp Kit Welding Practice Board DIY Soldering Kit Skill Training Board Led Transistor Set
Main highlights- The back of the PCB board is marked with mm/in scale for easy measurement of components, and also marked with PCB line width example, can be used as a design PCB reference.
- SMD components: 149 / Solder joints: 444,The full process circuit board is the same as the competition board. There are 10 types of SMD components for welding, and corresponding test points are set.
- Board material: international standard board, blue solder mask, all pads are tinned, high-strength fireproof and anti-fall material, which can be disassembled repeatedly.
- Beautiful water lamp circuit,The solder learning kit has proper circuit design with led indicator, easy to check your soldering result, they will be a flashing LED light after soldered and powered with DC 5 - 7V, very interesting effect.
8.5Good
View offer on:
Show more
10
GikfunGikfun DIY SMD SMT Welding Practice Soldering Skill Training Board NE555 CD4017 Water Flowing Led DIY Kit EK1885
Main highlights- The circular circuit is the running water lamp circuit, which is composed of CD4017, NE555 and leds, which can be used to work after being welded.
- Please make sure all components in right direction and right place; and check whether pseudo and float welding, this is very important in practicing and testing.
- PCB blank board Size: 80mm x 60mm
- High quality PCB, has clearly marked the electronics components, even beginners can easily solder successfully.
- Add 2pcs of QFP44 chip, double sided component layout, double welding.
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for ne555 cd4017 lights diy kit
