10 Best Mono Amplifier Hifi Diy Kit In The Us - Black Friday 2024
Best Choice1
ARRAROWNBluetooth Amplifier Board, 100W Mono AMP TWS Mini Audio Power Amplifier Module with Box Matching Function, Bluetooth/AUX/USB Input, DC 7-24V ZK-1001B DIY Speaker System Kit for Home Car
Main highlights- TWS BOX FUNCTION: As a mono amp, this power amplifier module support TWS BOX mode, if you have a couple of this ZK-1001B mono power amp, you can use two independent Bluetooth power amplifier boards connected by TWS box function, left and right channel stereo can be realized
- Multiple Protection Mechanisms: This ZK-1001B Bluetooth amp module is mini size:89 x 45 x 20mm, designed with over-voltage protection, under-voltage protection, over-heat protection, short-circuit protection, with case to protective it
- MULTIPLE FUNCTION KNOB: This mini amplifier only with a knob, it is a multiple function knob: Turn the knob clockwise/counterclockwise to adjust the volume level. Click: Play/pause. Double click: Next song. Three Click: Enter or exit TWS mode. Long press: Turn off/on
- HIFI MONO AMPFILIER BOARD: This ZK-1001B Mini Bluetooth audio amplifier board is a mono channel amp with 100W rated power, only contact a passive speaker(20-100W, 3-8Ω), DC7-24V/3A above. this mono ampfilier with a TPA3116D2 chip, distortion rate below 0.3%, and another upgrade large chips support AAC BT decoding, APP and TWS, low latency
- BLUETOOTH 5.1 INPUTS: The Bluetooth power amplifier board with 4 kind of inputs: AUX, USB flash drive, USB sound card and Bluetooth inputs, the upgrade large chips support Bluetooth 5.1, low latency, The range of audio devices (smartphones, tablets, laptops, etc.) with Bluetooth connectivity is 15m/49ft
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
PEMENOLBluetooth Amplifier Board, PEMENOL TWS DC 7-24V 100W Mono Audio Power Amplifier Module with Box Matching Function Support AUX/Bluetooth/USB for DIY Electronic Kit Car Home Christmas
Main highlights- 【WIDE APPLICATION】: PEMENOL Bluetooth power amplifier module, equipped with TWS function, is a powerful audio device widely used in DIY Bluetooth audio and other fields. Its excellent sound quality provides high-quality music and movie experience at home or in the office. Easy to install and use, it's a practical choice for music lovers and casual users alike. Choose PEMENOL for a high-quality, user-friendly, and practical audio equipment.
- 【TWS MODE】: PEMENOL power amplifier features box matching function, which allows for easy separation of left and right channels using two Bluetooth power amplifier modules of the same model. Enjoy a more authentic music or movie experience without any wired connections. Additionally, the PEMENOL power amplifier module boasts high fidelity sound quality and supports multiple audio input methods, making it the perfect choice for your private audio and video space.
- 【TWO INDICATOR】: PEMENOL Bluetooth power amplifier module features two indicators that provide clear status information. The work indicator shows whether the module is operating properly, while the TWS indicator indicates whether the module is in TWS mode for easier control and operation. This thoughtful design makes it simple to use the module and enjoy high-quality music.
- 【KNOB FUNCTION】: Power amplifier module features a multi-functional knob design, allowing for adjustable volume, audio playback/pause, and next track switching. It can also be long-pressed for power on/off and triple-pressed to enter TWS mode, enhancing your audio experience. Additionally, the finely manufactured knob operates smoothly and comfortably, enabling easy access to all functions and maximizing your enjoyment of music and movies.
- 【4 AUDIO INPUTS】: Bluetooth power amplifier module boasts 4 audio inputs - Bluetooth, AUX, USB flash drive, and USB sound card. Connect to your device wirelessly via Bluetooth, or to a TV, computer or audio device via the AUX input. USB flash drive and USB sound card inputs are also supported, allowing for easy playback of music files or computer audio. With multiple input options, you can easily choose the one that best suits your needs for a high-quality audio experience.
9.5Excellent
View offer on:
Show more
3
AcxicoAcxico 2Pcs 20W HiFi Mono Channel LM1875T Stereo Audio Amplifier Board Module DIY Kits
Main highlights- You can assemble these components by yourself and obtain knowledge about amplifier board.
- Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
- Supply voltage: Recommended ± 25V(maximum voltage can not exceed ± 30V, 18V AC full bridge rectifier is 25V)
- Package Included:2Pcs 20W HIFI Mono Channel LM1875T Stereo Audio Amplifier Board Module DIY Kits(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)
- Frequency response: 14Hz-100kHz(RC low-pass circuit considered by the maximum range 3.29Hz-482.29kHz)
9.4Excellent
View offer on:
Show more
4
DEVMODEVMO LM386 Super Mini Audio Amplifier DIY Kit Board 35x37mm 3-12V - Unsoldered
Main highlights- ★Working voltage : 3.5-12V
- ★This is an Electronic DIY KIT , some soldering experience is required.
- ★This Kit uses the audio amplifier LM386 chip, a simple external circuit,the audio signal is amplified.
- ★Package Includes:1set DIY KIT.
- ★All required electronic parts are provided. The image is for illustration
9.3Excellent
View offer on:
Show more
5
WalfrontNE5532 Amplifier Kit Stereo Preamplifier Volume Control Board with Treble Midrange and Bass Tone Controls DIY Kit Preamp Module
Main highlights- Wide frequency band and small noise, easy to use
- The chip has high conversion rate and strong drive ability, which will greatly help your project
- Small clutter interference of power grid, stable and performance
- Power supply circuit adopts full bridge rectifier, the four pins of rectifier is respectively in parallel connected with decoupling capacitor, effectively eliminate the high frequency interference of AC power grid
- Pay attention that it can not use 12V battery or DC directly as power supply
9.0Excellent
View offer on:
Show more
6
AcxicoAcxico 1Pcs 1969 Class A Amplifier Board HiFi Audio Power Amplificador PCB MOT/2N3055 DIY Kits(Single Channel)
Main highlights- Thick & heavy aluminum plates already mounted on the board( as in the pictures) for easy to interface with heatsink.( Left and right channels are shipped randomly)
- High quality solder with silver content is used in soldering.
- High quality electrolytic capacitors.ERO film capacitors for audio coupling.
- Hermetically sealed metal casing transistors used on both small signal and power stage.
- Double-sided,thick copper PCB,so the copper pad durability is greatly enhanced by lalated-through hole ( PTH) process.
8.7Very Good
View offer on:
Show more
7
HiLetgoHiLetgo 2pcs TDA2050 Mono Audio Amplifier Module Digital Mono Amplifier Board AMP DC/AC 5-24V Output 5W-120W for Speaker
Main highlights- TDA2050 Mono Audio Amplifier Module
- TDA2050 Digital Mono Audio Amplifier Board
- Input voltage: DC/AC 5-24V Output power: 5W-120W
8.6Very Good
View offer on:
Show more
8
DaakroDaakro ZK-1001B Bluetooth Amplifier Board,100W Mono Channel Amp Board with TWS Pairing Function,DC 7-24V, Bluetooth/USB and AUX Inputs, Audio Amp Board for Home DIY Wireless Speakers, Password Free
Main highlights- [Wide Application]Daakro ZK-1001B Bluetooth Power Amplifier Module with TWS function is a powerful audio device widely used in DIY Bluetooth audio and other fields. Its excellent sound quality provides high-quality music and movie experience at home or office. It is easy to install and use, making it a practical choice for music lovers and ordinary users. Choose Daakro to enjoy a high quality, easy to use and practical audio device.
- [Two Indicator Lights]The Daakro ZK-1001B Bluetooth Amplifier Module has two indicator lights that provide clear status information. The WORK indicator shows if the module is working properly, while the TWS indicator shows if the module is in TWS mode for easy control and operation. This thoughtful design makes the module easy to use and enjoy high-quality music.
- [TWS Mode]The Daakro ZK-1001B amplifier features a cabinet matching function that allows you to easily separate the left and right channels using two Bluetooth amplifier modules of the same model. Enjoy a more realistic music or movie experience without a wired connection. In addition, Daakro amplifier modules have high-fidelity sound quality and support multiple audio input methods, making them the best choice for your home AV space.
- [Knob Function]The power amplifier module is designed with multi-functional knobs to adjust volume, play/pause audio, and switch to the next track. You can also press and hold to power on/off and press three times to enter TWS mode to enhance your audio experience. In addition, the meticulously crafted knobs are smooth and comfortable for easy access to all functions, allowing you to maximize your music and movie enjoyment.
- [4 Audio Inputs]The Bluetooth Amplifier Module has 4 audio inputs - Bluetooth, AUX, USB flash drive and USB sound card. Connect to your device wirelessly via Bluetooth, or connect to your TV, computer or audio device via the AUX input. USB flash drive and USB sound card inputs are also supported for easy playback of music files or computer audio. With a variety of input options, you can easily choose the input that best suits your needs for a high-quality audio experience.
8.5Good
View offer on:
Show more
9
EujgoovPCB Board DIY kit Vacuum Electron Tube DIY Tube Amplifier kit Tube Amplifier kit Valve Preamp Amplifier Board Tube Headphone Amplifier Kit Headphone Amp Parts Musical Fidelity Kit DC12V
Main highlights- 【High Frequency And Low Proof】:The eight 470UF capacitors included in the DIY tube amplifier kit have very clean filtering, and the power system is excellent and noise-free. The filament is powered by DC 12V and needs to be connected in series to reduce noise.
- 【Funtion】:This vacuum tube amplifier can connect the 6J1 tube pre-amp between sound source and amplifier, it will effectively filter digital flavor, the music and human voice will be relatively good.
- 【Eight 470uf Capacitor Filter】:Eight 470UF capacitor filter is very clean, excellent power system to no hum, filaments are powered with DC 12V and need to be connected in series in order to reduce noise.
- 【Easy To Use】:This vacuum tube amplifier uses a DC 5.5*2.1 socket and an AC 12V transformer. You can also use an AC 12V transformer. No plug is needed, just solder the power cord to the circuit board.
- 【Assemble Yourself】:This diy amplifier kit comes in parts so you can assemble them together by yourself, enjoy the process of building your own tube amplifier.
8.3Good
View offer on:
Show more
10
DasiterDasiter OCL Amplifier Board Kit Dual 100W High Power Two-Channel Pure Final Stage DIY Audio Stereo Amplifier Module Parts
Main highlights- This Power Amplifier Uses a Typical OCL Circuit, Which Has the Advantages of High Stability, Wide Frequency Response Range, Good Fidelity, etc. This Circuit is Often Used in High-Fidelity Sound Reproduction Equipment.
- This OCL Stereo Amplifier is Suitable for the Assembly and Uuse of Electronic Enthusiasts and Audiophiles.
- The Power Amplifier Circuit of Household Power Amplifier and Active Speaker has a Good Effect.
- Fully Separated Components, Four High-power Triodes, Two Stereo Channels, Each Channel can Reach to 100W.
- Circuit Board Size: Glass Fiber Board 22.4cm*7cm, Working Voltage: Double AC 12V
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for mono amplifier hifi diy kit
