10 Best Milling Cutter for Hrc50 In The Us - Black Friday 2024
Best Choice1
uxcelluxcell Square Nose End Mill, 1/2" 3/8" 5/16" Tip Dia Solid Carbide AlTiN BN Coated CNC Router Bits 4 Flute Spiral Milling Cutter HRC50 with 1/2" 3/8" 5/16" Shank, 1 Set
Main highlights- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- Square Nose End Mill: Cutting Diameter: 12.7mm / 1/2"; 9.53mm / 3/8"; 7.94mm / 5/16"; cutting flute length: 25.4mm / 1"; 25.4mm / 1"; 20.64mm / 13/16"; shank diameter: 12.7mm / 1/2"; 9.53mm / 3/8"; 7.94mm / 5/16"; overall length: 76.2mm / 3"; 63.5mm / 2-1/2"; 63.5mm / 2-1/2"; cutting hardness: HRC50; spiral angle: 35 degree.
- Solid Carbide Tool: Carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Features: Square end cut, 4-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN BN coated can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
AYCHOLIZAYCHOLIZ 4 Flutes Carbide Square End Mill HRC68 Tungsten Steel Milling Cutter 10mm (0.394" Dia) CNC Milling Bits for Stainless Steel
Main highlights- Tips: AYCHOLIZ End mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- Strong and Durable: Milling cutter is made of tungsten carbide material, it is high-wearable and has a long life; 4 flutes 35° helix angle design,great for speedy cutting smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance.
- Package Included: 1pc square nose end mill. Cutting diameter: 10mm; Shank diameter: 10mm; Flute cutting length: 30mm; Overall length: 75mm.
- Application: AYCHOLIZ End mill bits are suitable for side milling, slot milling, step milling,drilling, etc. Suitable for carbon steel alloy steel(up to HRC45), alloy steel(HRC50), cast iron(HRC35 ~ 45), hardened steel(HRC55), stainless steel(HRC35), titanium alloy，heat-resistant alloy, etc.
- ALTiN Coating: High performance ALTiN coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds.
9.5Excellent
View offer on:
Show more
3
XHCNCTXHCNCT HRC50 3Flutes Tungsten Solide Carbide Roughing End Mills for Cutting Aluminium with no Coating CNC Router Bit Wood Metal milling Cutter Shank Dia 1/4 inches (1pc, 1/4" x1/4"x3/4"x2")
Main highlights- 4.Easy to operate: inch standard size, easy to install and adjust, reduces operational difficulty, and improves work efficiency.
- 3.Widely applicable: suitable for rough machining of various metal materials, such as steel, aluminum alloys, etc., with strong versatility.
- 2.Strong durability: Made of high-quality alloy materials, it has good wear resistance and impact resistance, extending its service life.
- 1.Efficient cutting: The roughing milling cutter adopts a wide blade design, which can quickly remove a large amount of material and improve production efficiency.
9.4Excellent
View offer on:
Show more
4
uxcelluxcell Carbide Square End Mill, 5/16" Dia AlTiN Coated 4 Flutes Milling Bit Cutter, for Carbon Steel Alloy Steel Titanium Metal, 5/16" Shank 1-1/4" Cut Length 4" Extra Long HRC50
Main highlights- Wide Applications: Mill bit can create slots (keyways or internal grooves), straight or square edge features, flat smooth surfaces, holes or for roughing, finishing and side milling operations. Well-suited for machining abrasive materials like carbon steel, alloy steel, and titanium.
- Tips: Use on standard milling machines, CNC machining centers, engraving machines. Make sure the end mill is suitable for the specific application and material being processed. Use a suitable coolant or lubrication method. Select an appropriate feed rate and cutting speed.
- Square End Mill Size: Cutting diameter: 5/16"; shank diameter: 5/16"; cutting length: 1-1/4"; total length: 4" (extra long); number of flutes: 4 flutes; end cut type: square end; cutting direction: right hand; cutting hardness: HRC50
- Features: Precision ground cutting edges allow for clean, precise cuts, resulting in accurate machining and excellent surface finish. Up-cut spiral flutes lift chips upward and away from the cutting area. Large spiral design helps effectively remove chips during cutting.
- AlTiN Coating: AlTiN (Aluminum Titanium Nitride) coating provides enhanced hardness, high oxidation resistance, and increased lubricity. Offers excellent performance in dry cutting applications and at high temperatures. Micro grain carbide milling cutter offers high hardness, wear resistance, enhanced rigidity and excellent heat resistance.
9.1Excellent
View offer on:
Show more
5
uxcelluxcell Carbide Square End Mill, 3/8" Dia AlTiN BN Coated 2 Flutes Milling Bit Cutter, for Hardened Steel Cast Iron Alloy Metal, 3/8" Shank 1" Cut Length 2-1/2" Long HRC50
Main highlights- Wide Applications: Mill bit can create slots (keyways or internal grooves), straight or square edge features, flat smooth surfaces, holes or for roughing, finishing and side milling operations. Suitable for machining hardened materials, cast iron, high-temperature alloys, aluminum, and non-ferrous metals.
- Tips: Use on standard milling machines, CNC machining centers, engraving machines. Make sure the end mill is suitable for the specific application and material being processed. Use a suitable coolant or lubrication method. Select an appropriate feed rate and cutting speed.
- Square End Mill Size: Cutting diameter: 3/8"; shank diameter: 3/8"; cutting length: 1"; total length: 2-1/2"; number of flutes: 2 flutes; end cut type: square end; cutting direction: right hand; cutting hardness: HRC50
- Special Coating: Aluminum Titanium Boron Nitride coating combines the advantages of both AlTiN and BN coatings. Offers superior thermal stability, reduced friction, and improved wear resistance compared to AlTiN. Micro grain carbide milling cutter offers high hardness, wear resistance, enhanced rigidity and excellent heat resistance.
- Features: Precision ground cutting edges allow for clean, precise cuts, resulting in accurate machining and excellent surface finish. Up-cut spiral flutes lift chips upward and away from the cutting area. Large spiral design helps effectively remove chips during cutting.
8.9Very Good
View offer on:
Show more
6
uxcelluxcell 10mm Dia 10mm Shank Square Nose End Mill 4 Flutes HRC50 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining
Main highlights- Widely Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Square Nose End Mill: Cutting Diameter: 10mm /0.39"; cutting flute length: 30mm /1.18"; shank diameter: 10mm / 0.39"; overall length: 75mm / 2.95"; cutting hardness: HRC50; spiral angle: 35 degree.
- Solid Carbide: The milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills edge blades, helping to improve cutting accuracy and efficiency.
- Feature: The helix angle of this milling cutter is 60 degrees. It provides the best cutting effect and improves chip removal during cutting, thereby improving cutting efficiency and surface quality. This angled design can also reduce the load on cutting and machine tools during processing, improve heat dissipation performance, and extend the service life of cutting tools and equipment.
- AlTiN Coating: The surface treatment uses AlTiN coating, which has high hardness, making the tool surface resistant to cutting forces and wear, extending service life; secondly, it also has excellent wear resistance and heat resistance, thereby reducing cutting forces , Improve cutting speed and efficiency, so that the tool maintains stable performance; in addition, the AlTiN coating surface has good lubricity, which can reduce the adhesion of chips between the tool and the workpiece, which help
8.6Very Good
View offer on:
Show more
7
LUOCUTLUOCUT Thread Milling Cutter CNC Metric Thread milling Machine AlTiN Coating HRC60 for Steel M2 M3 M4 M5（1pcsD3.9 P0.5-1.5
Main highlights- Suitable for processing steel, stainless steel, alloy steel and other metal materials below HRC60
- Suitable for CNC machining centers, engraving machines, engraving machines and other high-speed machines
- Suitable for 60-degree thread processing, processable pitch range: 0.5-1.5mm
- Packing list: 1 pcs, D3.9 thread milling cutter
- Material: Solid carbide, using ATNIS multi-layer composite coating, with good wear resistance.
8.5Good
View offer on:
Show more
8
CloudpowerCarbide Square End Mill Cutter, 4 Flute Extra Long Shank 6Mm*150mm Carbide End Mill for Milling Alloy Steels, Hardened Steel, Metal & More
Main highlights- 【Super Long Shank Design】With a 150mm super long shank, this end mill cutter provides extended reach, making it is good for deep milling operations. It can easily reach areas that standard end mills cannot.
- 【Sturdy Tungsten Steel Construction】Crafted from tungsten steel, our end mill cutter offers exceptional durability and longevity. It can withstand high-speed cutting and maintain sharpness for extended periods.
- 【Precision CNC Cutting】Designed for precision machining, this carbide end mill milling cutter is suitable for CNC machines. It features a 4-blade design, allowing for efficient and precise cutting in various materials.
- 【Imported Materials, High Hardness and Good Toughness】Our 6mm*150mm HRC50 4 flute extra long shank 150MM Carbide End Mill milling cutter is made of imported materials, ensuring high hardness and good toughness. It can withstand heavy-duty usage and provide excellent performance.
- 【Applications】Our 6mm*150mm carbide end mill cutter is suitable for a wide range of applications, including milling, slotting, and contouring. It is perfect for machining various materials such as aluminum, copper, and steel.
8.4Good
View offer on:
Show more
9
SENRISEHSS 10mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel
Main highlights- ☆The ideal cutter for milling dovetails, right hand cutting.
- ☆It fits for meatalworking mold steel, cast iron, carbon steel, alloy steel, tool steel, general iron material.
- ☆HSS material, durable and long service life.
- ☆Cutting edge is double-edged, angular distribution was given, more teeth, smooth cut.
- ☆Cutter diameter(D): 10 Size for you choose.
8.3Good
View offer on:
Show more
10
uxcelluxcell Carbide Square End Mill, 1/4" Diameter TiAlN Coated 4 Flutes Milling Bit Cutter, for Hardened Steel Stainless Steel Alloy Metal, 1/4" Shank 1-1/8" Cut Length 3" Long HRC50
Main highlights- Wide Applications: Mill bit can create slots (keyways or internal grooves), straight or square edge features, flat smooth surfaces, holes or for roughing, finishing and side milling operations. Suitable for machining tough materials such as hardened steels, stainless steels, and high-temperature alloys.
- Tips: Use on standard milling machines, CNC machining centers, engraving machines. Make sure the end mill is suitable for the specific application and material being processed. Use a suitable coolant or lubrication method. Select an appropriate feed rate and cutting speed.
- TiAlN Coating: TiAlN (Titanium Aluminum Nitride) coating provides high hardness, increased lubricity, and improved heat resistance. Performs well under high-temperature cutting conditions and provides good wear resistance. Micro grain carbide milling cutter offers enhanced rigidity and excellent heat resistance.
- Square End Mill Size: Cutting diameter: 1/4"; shank diameter: 1/4"; cutting length: 1-1/8"; total length: 3"; number of flutes: 4; cutting hardness: HRC55; end cut type: square end; cutting direction: upcut (right hand).
- Features: Precision ground cutting edges allow for clean, precise cuts, resulting in accurate machining and excellent surface finish. Up-cut spiral flutes lift chips upward and away from the cutting area. Large spiral design helps effectively remove chips during cutting.
8.0Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for milling cutter for hrc50
