10 Best I2c Lcd 128x64 Oled In The Us
Best Choice1
XIITIAXIITIA 2pcs 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 (White Light)
Main highlights- ★SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5.
- ★For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
- ★Driver IC: SSD1309
- ★Diagonal Screen Size: 2.42 inch
- ★2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HiLetgoHiLetgo 2.42" SSD1309 128x64 OLED Display Module 2.42 Inch OLED LCD Display Module IIC I2C 4 Pin or SPI 7 Pin Optional
Main highlights- IC I2C 4 Pin and SPI 7 Pin Optional
- Driver IC: SSD1309; Dot Matrix: 128x64
- Display color: Blue/Green/White/Yellow Optional
- 2.42" SSD1309 128x64 OLED Display Module
9.5Excellent
View offer on:
Show more
3
Teyleten RobotTeyleten Robot 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 - White Light
Main highlights- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
9.4Excellent
View offer on:
Show more
4
Teyleten RobotTeyleten Robot 0.96 inch LCD OLED Display Board Module 12864 128X64 IIC I2C SSD1306 Driver 4 Pins for Raspberry Pi Arduino(5pcs, White Light)
Main highlights- Voltage: 3V ~ 5V DC
- Ultra-low power consumption: full screen lit 0.08W
- There is also a removable transparent film on each OLED glass surface for scratch resistant protection until use.
- Pins has been soldered,comes in a small box to prevent it from being dropped during transportation
- Pin Definition: VCC,GND,SCL, SDA
9.3Excellent
View offer on:
Show more
5
HosyondHosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi (White)
Main highlights- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- It compatibles with Arduino Nano, R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
9.1Excellent
View offer on:
Show more
6
ideasparkideaspark 3Pcs 0.96 Inch OLED Display 3-Colors 128x64 SSD1306 SPI I2C IIC Serial LCD Screen Module Board with 4 Pins Soldered and 10 Dupont Cable Work Great with Arduino for Raspberry Pi
Main highlights- Resolution: 128 x 64, View angle: > 160°,Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Package List: 1 x Yellow-Blue OLED display,1 x White OLED display,1 x Blue OLED display,10 x Female to Female Dupont Cable,1 x Storage Box
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- Embedded Driver IC: SSD1306.Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. Work great for Arduino UNO and Mega, for Raspberry pi, 51 MCU, STM 32,etc
8.9Very Good
View offer on:
Show more
7
ACEIRMCACEIRMC 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 (Yellow)
Main highlights- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
- Driver IC: SSD1309
- Diagonal Screen Size: 2.42 inch
- 2.4" 2.42 inch 128x64 OLED LCD Display Module SSD1309 12864 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 C51
8.7Very Good
View offer on:
Show more
8
DWEIIDWEII 2.4" 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 DIY Electronic - Blue Light
Main highlights- This is a 2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current
- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- Driver IC: SSD1309
- Diagonal Screen Size: 2.42 inch
8.6Very Good
View offer on:
Show more
9
DIYmallDIYmall 1.3" OLED Display Module I2C IIC Serial 128X64 SH1106 LCD Blue Light Screen for Arduino Raspberry Pi 51 MSP420 STIM32 SCR ESP32
Main highlights- What You Get: 1 X 1.3" Blue Oled
- Supported Platforms: for arduino,raspberry pi, 51 series, MSP430 series, STIM32 / 2, SCR chips, ESP32
- Support wide voltage: 3.3V-5V DC
- Driver: SH1106
- Communication: IIC, only two I / O ports
8.4Good
View offer on:
Show more
10
DWEIIDWEII 6PCS 0.96 inch 12864 128X64 OLED LCD Display Board Module I2C IIC SSD1306 Driver 4 Pins for Arduino Raspberry Pi-White Light
Main highlights- ❃❃OLED-SSD1306, a more elaborate and beautiful screen than LCD, with more functions
- ❃❃Information: 128 x 64; View angle: more than 160 degree; Support voltage: 3.3V-5V DC; Power consumption: 0.04W during normal operation, full screen lit 0.08W
- ❃❃Driver and communication: embedded driver IC; Communication is IIC/ I2C interface, only needs 2 I/O ports; Compatible with MMDVM, Pi-Star, and compatible with Raspberry pi
- ❃❃Compatibility: white, 0.96 inch OLED module is designed to display graphic information and text information directly on your microcontroller project; Compatible with Mega, for Raspberry pi, 51 MCU, STIM 32, etc.
- ❃❃128 X 64 Pixel: Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software.
- ❃❃ there are no fonts embedded in the OLED controller, so users can use the font generation software to create the fonts
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for i2c lcd 128x64 oled
