10 Best Homebrew Stainless Bulkhead In The Us - Black Friday 2024
Best Choice1
Hilangsan(2 pack) Hilangsan 1.5" Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle
Main highlights- 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily.
- 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!
- 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking.
- 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter.
- 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DERNORDDERNORD 1.5" Tri Clamp Bulkhead Compression Fitting 304 Stainless Steel Weldless Homebrew Kettle Bulkhead
Main highlights- Tight Seal: Drill a hole on any vessel and tighen the locknut with 2pcs food grade gaskets
- Material: 304 stainless construction and high heat compatible silicone gaskets
- Easy to Install: Tri Clamp weldless bulkhead flange allows you to add a TC port to any tank or kettle without welding
- Connection Size: Fits 1.5”TC(50.5mm Ferrule OD)
- Application: Suitable for kettles, beer kegs, cola kegs, soda buckets with a diameter less than 12 inch.
9.6Exceptional
View offer on:
Show more
3
HoriznextHoriznext npt 1/2 home brew bulkhead ball valve stainless steel 304 for Homebrew beer Kettle tap equipment kit, weldless water tank spigot (1 pc)
Main highlights- Working Temperature: -100 to +660 degrees ℉ both indoor and outdoor.
- NPT 1/2 (National Pipe Taper threads fitting) x 1/2" inner diameter hose
- Maximum working pressure：1000 psi
- Made of stainless steel 304, heavy duty, durable and corrosion resistance.
- High temperature food-grade silicone seals for pot.
9.4Excellent
View offer on:
Show more
4
TianTianUp1/2 Inch Stainless Steel 304 Ball Valve Weldless Bulkhead for Home Brewing Kettle Building Home Brew Kettle Mash Tun
Main highlights- 【Unrestricted Flow with Full Port Ball Valve】Experience seamless and unimpeded flow rates during your brewing process. Our weldless bulkhead features a full port ball valve for maximum efficiency and ease of use.
- 【Secure Heat-Resistant Seal】Brew with confidence knowing that our product is equipped with a heat-resistant O ring, providing a secure and leak-free seal even under high-temperature brewing conditions.
- 【Premium 304 Stainless】Crafted from high-grade 304 stainless steel, our bulkhead fitting guarantees exceptional durability, unmatched corrosion resistance, and a product that stands the test of time.
- 【Perfect Fit for 7/8" Kettle Holes】Our 1/2 inch Stainless Steel Ball Valve Weldless Bulkhead is meticulously designed to precisely fit 7/8" kettle holes, ensuring a hassle-free installation for your brewing setup.
- 【Ergonomic "L" Shape Design】Our thoughtfully designed "L" shape ball valve ensures comfortable handling and precise flow control, enhancing your overall brewing experience.
9.3Excellent
View offer on:
Show more
5
DERNORDDERNORD Stainless Steel Ball Valve - 1/2 Inch Weldless Bulkhead for Building Home Brew Kettle/Mash Tun
Main highlights- WOG1000 working pressure rating (1000psi) to withstand high pressure and extreme temperatures
- Rigorous testing standards prove minimal corrosion and rust along with easy cleaning
- 1/2 Inch weldless bulkhead fitting fits 13/16 Inch kettle hole
- 1/2 Inch Stainless Steel Hose Barb
- 1/2 Inch Stainless Steel 2 piece Full Port Ball Valve
9.1Excellent
View offer on:
Show more
6
DERNORDDERNORD 1/2 Inch Weldless Ball Valve Stainless Steel 304 Bulkhead For Home Brew Kettle (1/2 NPT to 3/8 Barb Hose)
Main highlights- WOG1000 working pressure rating (1000psi) to withstand high pressure and extreme temperatures
- Rigorous testing standards prove minimal corrosion and rust along with easy cleaning
- 3/8 Inch Stainless Steel Hose Barb
- 1/2 Inch weldless bulkhead fitting fits 7/8 Inch kettle hole
- 1/2 Inch Stainless Steel 2 piece Full Port Ball Valve
9.0Excellent
View offer on:
Show more
7
Enoch's LandEnoch's Land Stainless Steel Home Brew Kettle Weldless Bulkhead,1/2" MPT X 1/2" FPT Bulkhead Fitting for Beer Wine Home Brewing Kettle
Main highlights- Thread: 1/2" male NPT x 1/2" female NPT, can be used to connect thermometers, valves, spigots, etc.
- Silicone o-rings: equipped with two silicone o-rings to provide a more stable seal
- Installation: 22mm hole in the kettle
- High quality:the weldless bulkhead are made of forged stainless steel, unlike the common castings on the market, which are more robust and corrosion resistant.
- Good after-sales service: If you have any questions about the product or installation, please contact us
8.7Very Good
View offer on:
Show more
8
semfeil brewSemfeil Brew 1.5" Tri Clamp Bulkehad Brew Kettle Pot Weldless Tri Clamp Bulkhead 304 Stainless Steel Homebrew Kettle Tri Clamp Bulkhead 1.5" Bulkhead Fitting
Main highlights- Weldless Design Tri Clamp Bulkhead Fitting Ideal for FTSs and Brew Bucket flat lid pressurized transfers
- Tri clamp bulkhead fitting The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
- The 304 Weldless Tri Clamp bulkhead Stainless Construction and High heat compatible silicone gaskets.And add 1PCS extra sealing ring
- Add a 1.5" Tri Clamp Bulkhead flange to virtually any vessel!Just drill a 41MM hole and tighen the locknut with 1pcs extra Food grade gasket..
- 1.5 Ttri Clamp Bulkhead Works on kettle as small as 12" in diameter.
8.6Very Good
View offer on:
Show more
9
Enoch's LandEnoch's Land 2" Tri Clamp Bulkhead Compression Fittings,Stainless Steel 304 Weldless Bulkhead, Homebrew Kettle Bulkhead
Main highlights- Tri clamped weldless bulkhead flange adds a TC connection to any kettle or tank, no welding required
- Material: Made of 304 stainless steel, corrosion resistant and durable. And with polished finish, it looks great.
- Large washer: The washer is made of high quality silicone and provides a better seal when tightening the nut.
- Installation: Simply drill a 48mm hole in the kettle, place the washer and tighten the nut to complete the installation.
- Dimensions: TC bulkhead fitting with 11/2" NPS thread to allow connection to NPT pipes, TC flange size is 2" (64 mm diameter).
8.4Good
View offer on:
Show more
10
semfeil brewSemfeil Brew TRUE 2" Tri clamp Bulkhead Compression Fitting 304 Stainless Steel Homebrew Kettle Pot 2 Inch Tri Clamp Weldless Bulkhead Fittings
Main highlights- These are extremely high quality pieces machined out of 304SS and polished to perfection (except for the locknut which is cast finish 304SS
- The silicone O-ring is included and gets captured in a groove like our other True Bulkheads
- The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
- The 2" Triclover (TC) weldless bulkhead flange allows you to add a TC port to any tank or kettle with absolutely no welding or soldering
- Add a 2" TC flange to virtually any vessel!Just drill a 48MM hole and tighen the locknut with 1pcs Food grade gaskets. And add 1PCS extra sealing ring
8.1Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for homebrew stainless bulkhead
