10 Best Hobbywing Flightcontroller In The Us - Black Friday 2024
HOBBYWING Quicrun Fusion PRO 2300KV FOC System 2in1
9.9 Easy to build9.7 Battery Duration9.5 Noise levelWhy we love it
All-in-one design for easy and clean installation.Excellent performance in all weather and track conditions.Smooth, quiet operation with impressive torque and control.- Curious about how we select the top products for you? Explore How It Works
HOBBYWING Quicrun 10BL120 G2 & 3652SL G2 Combo (QR10BL120 G2 &3652SL 4000KV G2)
Main highlights- Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market.
- Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC.
- High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.
- Efficent cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state
- Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading.
- COMBO: QR10BL120 G2 ESC & 3652SL G2 Motor
HOBBYWING Multifunction LCD Program Box Pro
Main highlights- XERUN series car model brushless ESC (V2.0 and above) EZRUN series car model brushless ESC (V2.0 and above) PLATINUM series air model brushless ESC SEAKING Pro series ship model brushless ESC Some ESCs of QUICRUN series Remarks: 1. The scope of application here can also be understood as all the escs that the old LCD G2 program box and OTA Bluetooth module can support. 2. Whether the programmable box is supported depends on the specific ESC model. If necessary, you can check the ESC information introduction on the official website or consult the Hobbywing official.
- Supports multiple languages It makes setting ESC parameters a breeze. (Chinese, English, Japanese)
- OTA parameter adjustment and firmware update The built-in Bluetooth module functions as an OTA Programmer. The ESC establishes a wireless connection with a smartphone through the LCD programming box. The HW Link V2 app can be used to adjust the ESC and update the Firmware. Supports updates to the firmware of the LCD Program box itself as well.
- Large Screen is easier to read than ever. Equipped with a 2.8-inch display Double the characters and screen information over the previous LCD Program Box, the new display is a welcomed upgrade.
- Import and Export ESC profiles Import and Export your favorite profiles with ease. You can bring in your ESC settings, save them and export them to a new ESC. This makes profile sharing simple and easy.
- Built-in Sound Built-in audio to make settings save confirmations easy. The sound can of course be turned off as well.
- Battery Voltage Tester is built in. Supports 1-8S battery Voltage detection, Easy to view battery cell voltage information.
Thrustmaster T-Flight Hotas X (Compatible with PC)
9.5 for playing video games9.1 Simple to use8.7 DurabilityWhy we love it
Highly customizable with 12 programmable buttons and 5 axles.Adjustable resistance for personalized joystick precision.Affordable quality, ideal for entry-level gamers.HOBBYWING XRotor Flight Controller F7 Convertible for FPV Racing
Main highlights- pecial interface for DJI image transmission system With DJI image transmission system port, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.
- Unique installation design and shock absorption structure The double hole distance mounting hole design (30 * 30MM & 20 * 20MM) can adapt to different frames. The unique flexible flat cable connection mode (The effect is better with hobbywing tower 4in1 ESC ), and the shock absorption mechanism of installation hole, can effectively reduce the impact of external vibration on FC high-sensitivity components, and make the flight more stable and accurate.
- Super hardware and running speed Equipped with STM32F722 MCU
- On-board 5V & 12V dual BEC circuit FMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices. On-board Pit Switch module FC integrated Pit Switch module can open or close VTX by radio after being adjusted on FC parameter software. Easy and convenient.
- Compatible with 30x30 and 20x20 boards: Perfectly match with Hobbywing ESC Match with Hobbywing tower 4in1 ESC, easy to install and wire. The appearance is more beautiful.
Hobbywing QUICRUN WP 1080 G2 Brushed 2-3s ESC
Main highlights- The first "real car mode" The direction of the motor is switchable in real time by using the idle channel on the remote control.
- Real-Time Adjustment of Drag Braking Force. 15 programmable parameter items PWM Frequency: 1K/2K/4K/8K/16K Adjustable Freewheeling (DEO) capability Drag brake rate in 9 levels (adjustable)
- Multiple protections: Over Voltage Protection Low voltage cut-off protection for battery Over-heating protection Throttle signal loss protection, and much more
- Great built-in BEC output capacity switchable 6V/ 7.4/ 8.4V
- Fully Water-proof and dust-proof, suitable for all-weather races. Small size, with built-in capacitor module.
- Four operating modes available (Real Car Operating / FWD with Brake / FWD and REV with Brake / FWD and REV)
HOBBYWING QUICRUN 10BL120 SENSORED G2
Main highlights- combining software and hardware to provide comprehensive protection The ESC is built using top-of-the-line hardware, and proven software to provide a robust and reliable platform.
- Supports Motor Rotation The motor rotation is adjustable CW (clockwise) and CCW (counterclockwise), adapting to different chassis.
- Boost/Turbo timing technology The 10BL120 G2 features adjustable electronic timing. Turbo and Boost can be used to fine-tune power delivery and get the most out of your setup. Up to 32 degrees of electronic timing is available. Note: Boost and Turbo timing cannot be used with a 3S battery to prevent damage.
- Best value for money, Easy to use The new 10BL120 G2, takes the outstanding quality and durability of provenHOBBYWING platforms and makes it even easier to use and setup. The perfect choice for 10th-scale setups. - Cont./Peak Current: 120A / 760A - Motor Type: Sensored/Sensorless Brushless motor - Applications: 1/10th Touring, Buggy, Drift
- BEC upgrade, stronger driver The BEC's continuous output current has been upgraded from 3A to 4A. The maximum current is at 7A, and the output voltage is now adjustable from 6V/7.4V. Hobbyists will be able to use high-voltage and powerful servos available on the market with greater control - BEC Output: 6V/7.4V @ 4A (Switch-mode) - LiPo Cells: 2-3S Lipo - Motor Limit: 2S Lipo: ≥4.5T 3S Lipo: ≥10.5T 3650 size motor
- Abundance programming methods Multiple programming/tuning methods are supported. -Works with the Multifunction LCD programming Box Pro, -The Multifunction LCD Programming Box (Nonpro), -LED Programming Box, and has onboard button/led tuning.
SpeedyBee F405 Wing Flight Controller Stack, APP Control, INAV Ardupilot Support, Plug and Play, Multilayer Wireless FC PDB Board for RC FPV Drone VTOL Fixed-Wing Tiltrotor Airplane Plane
Main highlights- MULTIPLE WIRELESS REMOTE-CONTROL METHODS: This flight control board supports multiple control methods. You can remotely control your aircraft wirelessly, and effortlessly configure various flight parameters, and it supports not only app control but also BLE, Wi-Fi, and Bluetooth connections, providing you with a multi-scenario and multi-mode remote control solution.
- INAV AND ARDUPILOT DUAL FIRMWARE SUPPORT: The board supports both INAV and Ardupilot firmware, allowing wireless adjustment of various flight parameters. It supports various modes of play, such as wing racing, FPV formation flying, autopilot and long-range flights, vertical takeoff and landing, etc.
- 3-LAYER CIRCUIT BOARD DESIGN: The multi-layer circuit board design provides different layers of circuit boards, making it easy to assemble with a three-in-one design. This avoids multiple circuit connections causing circuit board shorts, providing you with a safer, more reliable, and stable flight experience.
- 2 EASY INSTALLATION MODES: The flight control board is designed with two installation modes. The front side features a full pin connection design, allowing easy connection to various external devices, just plug and play. The back side is equipped with clear soldering points, enabling precise soldering.
HOBBYWING Quicrun MINI24 Combo Outer 1621SL 3500KV
Main highlights- Support various LED/LCD programming boxes The ESC not only supports simple LED programming boxes, but also supports high-end products like the LCD programming boxes with a more complete display.
- Size/Weight: 28x17.8x13mm/13.5g Programming port: Independent programming port
- LiPo Cells: 2-3S Lipo BEC Output: 5-7.4V Adjustable, Continuous Current of 5A (Switch-mode)
- Easy to install and ready to use The QuicRun WP Mini24 uses a PH 2.0-3PIN female connector. Plug and play with HW motors or another brand of motors with the same plug. The input end uses a PH 2.0-2PIN female connector. Other models such as SCX24 are able to plug and play. The common connector saves the trouble of re-soldering plugs.
- Designed for smaller scale crawling vehicles The software, hardware, and structure of the QuicRun WP Mini24 are tailor-made for small-scale crawling vehicles. It has a large torque at low-speed, and operates smoothly. The QuicRun WP Mini24 is the ideal choice for crawling vehicles for 1/16th, 1/18th and 1/24th scale models.
- Cont./Peak Current: 25A/60A Motor Type: Sensor-less brushless motor, Sensored brushless motor (only works in sensor-less mode), and brushed motor
- Applicable motors: QuicRun Outer 1621, mainstream 1212, 1806 external rotor and sensor-less brushless motors; 050, 130, 180 including other brushed motors.
HOBBYWING QUICRUN Fusion Mini16 System
Main highlights- The system boosts high efficiency, generates less heat, and effectively extends run time while the motor operates more quietly and smoothly. With an IP65 protection grade, it’s capable of running in all conditions. It offers intelligent torque output and speed closed-loop control for precise handling and includes active drag brake force adjustment, providing superior holding power on inclines.
- The QuicRun Fusion Mini16 FOC systemfeatures an integrated design of the ESC and motor, simplifying the car frame layout and wiring for enhanced convenience. Employing FOC (Field Oriented Control)driving mode for rock crawlers, it delivers strong low-speed torque, improving upon standard brushless systems and often being preferred over brushed systems for its overall feel.
- Equipped with a strong built-in switch mode BEC, the system offers a continuous current of up to 4A and supports switching between 6V and 7.4V, enabling it to drive high-torque and high-voltage servos. It also includes multiple protection functions: battery low voltage, overheat, throttle loss, and lock-up protection. For convenient ESC parameter settings, it supports LED and LCD G2/Pro program boxes.
- -Motor KV: 3000KV -Diameter / Length of motor: 24mm / 42mm
- -Continuous / peak current: 30A /80A -Main Applications: 1/16&1/18 Crawler
- -BEC output: 6V / 7.4V adjustable, continuous current 4A (Switch mode) -Size/Weight: 24mm(diameter)x42mm(length) / 72g (including wires&connectors)
Black Friday Sale
Deal ends in
HrsMinSec