10 Best Gps Arduino Aircraft In The Us - Black Friday 2024
Best Choice1
![MKR GPS Shield [ASX00017] - High-Performance GNSS Module for Arduino MKR Boards, Featuring u-blox SAM-M8Q, Multi-Constellation Support (GPS, GLONASS, Galileo), and Plug 'n' Play Functionality.](https://cdn.gusav.com/8221dfa3/loader.svg)
ArduinoMKR GPS Shield [ASX00017] - High-Performance GNSS Module for Arduino MKR Boards, Featuring u-blox SAM-M8Q, Multi-Constellation Support (GPS, GLONASS, Galileo), and Plug 'n' Play Functionality.
Main highlights- Plug and Play Convenience: Designed specifically for MKR format boards, the shield offers a straightforward plug 'n' play experience. It can also be easily connected to any compatible board with an Eslov connector using the supplied cable, making it versatile for various projects.
- Multiple Interface Compatibility: The MKR GPS Shield can interface with Arduino boards through a serial connection when mounted directly or via an I2C connection using the Eslov cable. This flexibility ensures compatibility with a wide range of Arduino projects.
- Flexible Configuration Options: This shield supports configuration through specialized commands, with an onboard battery holder that retains custom settings even when powered off. Ideal for applications requiring specific operational modes, such as high-altitude experiments or specialized localization requirements.
- Comprehensive Library Support: Utilize the Arduino_MKRGPS library, which simplifies access to GPS data and offers a consistent API across both interfaces. This makes it easy for users to integrate GPS functionality into their projects, whether for fleet monitoring, scientific research, or outdoor navigation.
- Advanced GNSS Technology: The MKR GPS Shield is equipped with the u-blox SAM-M8Q module, allowing simultaneous reception and processing of GPS, GLONASS, and Galileo signals for highly accurate positioning and localization in various environments.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
GeekstoryGeekstory DY-880 TTL GPS Receiver Module with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou for Arduino FPV Aircraft CC3D Flight Control, Replace BN-880 GPS
Main highlights- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- DY-880TTL is suitable for Open source flight controller, not for flight control with SCM
- DY-880TTL gps module is dual module compass, with and electronic compass IC HMC5883L
- DY-880TTL gps module has flash to save configuration. So you do not need to reset next time when you use it. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
9.7Exceptional
View offer on:
Show more
3
Geekstory18% OffGeekstory BE-280 GPS Module M10050 Chip with Ceramic Antenna Positioning Tracking TTL Level 38400bps Beidou GPS Antenna for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Main highlights- What you will get: 1*BE-280 GPS Module; 1*1.25mm 6pins Cable; 1* 1.25mm 6P Connector Male Cable; 1*1.25mm 6P Connector Female Cable
- This BE-280 GPS Module using the latest 10th generation chip. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Baud Rate : 4800bps to 921600bps, Default 38400bps.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- BE-280 gps module without flash memory to save configuration, so you need to reset data next time when you use it. And it has no compass. If you need gps with flash and compass, please buy bn-880、bn-880q or be-880、be-880q from Geekstory
9.6Exceptional
View offer on:
Show more
4
DIYmallsDIYmalls BE-220 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-220 GPS
Main highlights- -be220 GPS equiped with 10th chip to replace the bn220 gps, more accurate and receiving signal faster.
- -be-220 gps should be used outdoor, and the antenna side facing to the sky.
- -be 220 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
- -The blue (TX) light flashes when power on, indicating there is data output.
- -Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
9.5Excellent
View offer on:
Show more
5
Geekstory11% OffGeekstory DY-180TTL GPS Receiver Module Dual Glonass GPS Navigation Module TTL Level 9600bps with GPS Antenna for Arduino FPV Aircraft,Replace BN-180 GPS
Main highlights- What you will get: 1 X DY-180TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- This DY-180TTL GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps
- This DY-180 TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
9.3Excellent
View offer on:
Show more
6
Beffkkip2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
Main highlights- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;
9.2Excellent
View offer on:
Show more
7
DIYmallsDIYmalls BN-180 GPS Glonass Module TTL NMEA-0183 1Hz 9600bps for Arduino Aircraft RC FPV Drone Flight Control
Main highlights- When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold start”. Once you’ve done it the first time, later when you restart bn180 GPS module, it will get a lock much faster.
- If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN180 GPS Module can be used with pi, esp32 development board, pc (driver required), drone flight controller etc.
- BN 180 gps doesn't have flash and compass. If you need it, please check bn-880 gps module via "Visit the DIYmalls Store"
9.0Excellent
View offer on:
Show more
8
GeekstoryGeekstory DY-220 GPS Receiver Module Dual GPS Glonass Module Navigation TTL Level 9600bps with Active Antenna Build-in Flash for Arduino FPV Aircraft, Replace BN-220 GPS
Main highlights- What you will get: 1 X DY-220TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- This DY-220TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps
- DY-220TTL gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy other from Geekstory
8.8Very Good
View offer on:
Show more
9
Teyleten RobotTeyleten Robot ATGM336H GPS+BDS Dual-Mode Module Flight Control Satellite Positioning Navigator Replacement NEO-M8N NEO-6M for Arduino 2pcs
Main highlights- Wearable device
- Mobile phones, tablet PCs, handheld devices
- Embedded positioning device
- Car positioning in navigation
8.7Very Good
View offer on:
Show more
10
VFANVFAN GPS Module Antenna Dual GLONASS GPS L1 for NTP Navigation for EPS32 Raspberry Pi Pixhawk Aircraft Flight Controller USB TTL
Main highlights- [Package] X1 GPS module, X2 20cm DuPont style jumper wires, X1 100cm “USB to sh1.0” 4 pin cable for PC.
- [NTP & Accuracy] The PPS connection achieves precision to within a few 10s of nanoseconds for making an NTP time server, but requires configuring one of the GPIO pins to accept a PPS signal. And 2.5 m CEP for GPS and 4 m CEP for Glonass, GPS Average Acquisition: Cold starts within 1 Minute and Hot starts 2S. ( tested in the open area)
- [Functionality] This GPS module outputs ASCII TTL level NMEA 0183 Sentences at 9600bps(default)，it is easy to get $GPGGA/GPGLL/GPGSA/GPGSV/GPRMC/GPVTG/GPZDA message with the official GNSS software “u-center” which based on Windows OS or usual GPS parsing libraries for you own project, like "GPSD" and "NTPD" from Git hub.
- [Ease of use] Power Supply: DC5V. Built in TTL (Logic High Level: 3.3V) and USB interface on board. With our cables, it is easier to connect to your development board, fit for Raspberry Pi series/ESP8266, ESP32/Adafruit/Arduino due or PC. !!!BUT NEED a 5V to 3.3V converter board for Arduino.
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for gps arduino aircraft
