10 Best Extension Tool Tube Brake In The Us - Black Friday 2024
Best Choice1
FIRSTINFO TOOLS FIT YOUR NEEDSFIRSTINFO A1107US Patented Third Generation 10.5L Pneumatic/Manual Oil Vacuum Extractor | Safety Pressure Gauge | 51 Inch Tube | 6 Tubes | Silicone Brake Fluid Hose | Thinnest Tube | Taiwan
Main highlights- 【Safety Pressure Gauge】This upgraded evacuator is built with a pressure gauge to check the inside vacuum pressure while operating. Ensures the safest working operation.
- 【Patented Extractor w/ 22 Months warranty】 Please identify FIRSTINFO oil extractor that has the patent authentication. (US Patent Number: 8360741) We provide you with quality assurance tools with 12+10 months of after-sales warranty support. Help you to achieve a satisfactory shopping experience.
- 【No Collapse】A vacuum safety valve avoids damaging the extractor from overpressure and eliminates potential risks during the extraction.
- 【39.3-142 inches Tubes, Up to You】Include a NEW Extra Extension Tube to connect, and you will get the longest extraction hose- Total Length: 142 inches long. To reach the very bottom of the reservoir and suck up the fluid. One extra brake oil hose Ø4x8mm X 78.7 inch long with a check valve to avoid oil back flowing when bleeding. To switch FIRSTINFO extractor to a brake bleeder easily.
- 【10.5L Large Capacity Can Extract 2 Cars】With Pneumatic and manual modes to fit your needs. The pneumatic mode for higher speed of oil change. Manual mode requires no other equipment to do the oil/fluid changing.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DPTOOLDPTOOL Brake Line Flaring Tool Kit, 45 Degree Single, Double and Bubble Flares, Brake Line and Tubing Flaring Tool for 3/16", 1/4", 5/16", 3/8" and 4.75mm Tubing, Brake Flare Tool for Steel Metal Tube
Main highlights- Wide Application: This flaring tool can be used with 3/16", 1/4", 5/16", 3/8" and 4.75mm diameter lines, Suitable for automotive brake lines, transmission cooler lines and fuel lines and more
- Tips for Use: Before doing a flare, deburr the inside and outside of the tubing to ensure that metal shavings and impurities are removed from the inside and outside of the tubing. Then, apply a small amount of anti-seize to the end of the cut tubing to prevent problems when squeezing. Also, it can be added a little oil to the flaring cones (OP.1 and OP.2). Finally, it is a matter of taking care to put the appropriate fittings on the ends of the tubing, with the flared ends facing outward
- Professional Brake Flaring Tool: Made of high quality steel and heat-treated and oxidized, it is extremely hard, durable and not easy to be damaged; at the same time, it has been professionally designed and rigorously tested to be highly accurate and stable, and it can produce many types of perfect flares in a short period of time, it is professional brake line and tubing flaring tool
- Multi Purpose Flaring Tool: This is a multi-functional brake line flaring tool. Used to create 45-degree single, double and bubble brake flares on 304 stainless steel, steel and soft metal tubing in a short time. It produces flares of high quality and accuracy that do not lead to subsequent leaks in hydraulic or brake lines, making it a must-have brake flaring tool for the DIY or mechanic
- Easy to Make Perfect Flares: First, select the flat face die, place the tool in a secure vise, tighten the clamps so they do not move; Second, loosen the clamps, select the desired parting size, insert the die into the rectangular recess in the base of the tool, place the tube between the two halves of the die; Then, turn the clamps back to their original position, OP.0 is aligned with the port of the tube, push the OP.0 to press it into the port of the tube; Finally, select the desired, select the desired size of reaming cone OP.1, align the tube port, turn the handle and press it into the tube port, then, select the desired size OP.2, repeat the operation, and you can easily complete flare
9.7Exceptional
View offer on:
Show more
3
BTSHUBBTSHUB Tube Bender, Tubing Bender 180 Degree Brake Line Bender for 1/4", 5/16", and 3/8" Tubing, 3-in-1 Heavy Duty Manual Bender for Copper, Brass, Aluminum and Thin Steel Pipes
Main highlights- 【Suitable for 3 Sizes Tubing】Tubing Bender tool works better on three sizes of tubing 1/4", 5/16" and 3/8" (8mm, 6mm, 10mm) .
- 【High Effitiency】 Manufactured with high-quality, heavy duty steel, the tube bender can bend copper, brass, aluminum and thin steel pipes. Easily produce angled bends in round tubing
- 【Easy to Use】Ergonomic wide hook grips equipped with non-slip, long knurled grip handles allow you to deliver the optimal and comfortable working experience. Suitable for use on construction sites, plumbing jobs, shipping, manufacturing, heating, decorating or even at garage repair shops
- 【Durable and Long Last】High visibility markings 0-180° design. Avoid denting and collapsing your tubes. Made from strong, durable cast iron and can be mounted on either a bench or frame. High precision and premium machined aluminum alloy for strength and durability.
- 【0-180 Degree Bending】Simply adjust the metal bender according to the angle you require from 0-180 degrees. Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the air conditioner installation and vehicle repair.
9.4Excellent
View offer on:
Show more
4
ClatoonClatoon Brake Line Double & Single Flaring Tool Kit with Tubing Cutter, Brake Line Repair Kit for Copper, Aluminum, Brake Line and Brass Tubing, Flare Tool kit Includes 5 Adapters, 45 Degrees
Main highlights- WIDE APPLICATION: This flaring tool kit makes single and double flares on copper, aluminum, brass, magnesium, and soft steel. In addition to brake lines, it can also be used in air conditioning lines, HAVC systems, hydraulic lines
- PREMIUM MATERIAL: The flaring bar and forged yoke are forged with a heavy duty design of high strength steel, corrosion resistance, and the chrome swivel is made of alloy steel to reduce friction, accurate and time-proof
- PACKAGE INCLUDES: The brake line flaring tool kit includes 1 x Flaring Bar, 1 x Tubing cutter, 1 x Yoke With Cone Anvil, 5 x Flaring Dies. Suitable tubing sizes are 3/16", 1/4", 5/16", 3/8", 1/2". Multiple sizes will suffice for most of your needs
- NOTE: Clatoon is committed to providing you with professional and comprehensive repair tools. The sizes included in this flare tool kit will help you with most of your problems. If you have any questions about this product, we would work out a satisfactory solution to your problems
- EASY OPERATION: The T-handle provides a solid lever to reduce fatigue, allowing you to get a flare without much effort. And this double flaring tool kit comes with a handy plastic case for easy storage and transportation
9.3Excellent
View offer on:
Show more
5
ARESARES 18019 - Double Flaring Tool Set with Extra Adapters- Use on Copper, Aluminum, Soft Steel Brake Line and Brass Tubing - Includes Mini Tubing Cutter and Storage Case
8.9 Durability8.4 Simple to use8.2 worth the moneyWhy we love it
Comprehensive: Includes all sizes.
Durable: Heat treated steel.
Versatile: Works with many materials.
9.1Excellent
View offer on:
Show more
6
DURATECHDURATECH 200CC Fluid Extractor Automotive, Fluid Pump with Long Extension Tubes, Oil Syringe with Powerful Suction, Fluid Extractor Pump for Extracting Engine Oil, Transmission Oil and Brake Fluid
Main highlights- Wide Application: Compatible with most equipment, this oil removal pump can efficiently and cleanly extract and replace transmission fluid, coolant, power steering fluid, gear oil, brake fluid, and engine oil from cars, boats, trucks, RVs, lawnmowers and golf carts
- Upgraded Extension Tubes: The suction pump includes two extension hoses with diameters of 1/4" and 5/16", which can be connected up to 24 inch, long enough to reach the bottom of an oil pan. Both extension hoses are equipped with end caps to prevent fluid spillage
- Quality Construction: Made of high-quality and durable PP material, the automotive syringe is solid in use. The self-locking copper connector securely holds the tube, preventing it from falling off during use. The transparent body of the suction pump has clearly marked scales to accurately monitor the fluid level
- Package Contents: The DURATECH fluid extractor includes 1 x 200cc fluid pump, 2 x 12" extension tubes with end caps, 2 x spare rubber sealing rings, and 1 x anti-drip silicone connector
- Double Seal Design: Our fluid extractor features strong suction power and no oil leakage. The double rubber ring design creates an airtight seal for powerful suction, and the precision threads on the end of the pump help establish a secure seal to prevent any leakage
8.9Very Good
View offer on:
Show more
7
ThorstoneThorstone Double & Single Flaring Tool Kit for Brake Line and Brass Tubing Tool with Extra Adapters, 45 Degrees, Red
8.0 Simple to use8.0 Durability8.0 worth the moneyWhy we love it
Durable heat-treated steel for strength and longevity.
Comprehensive set with multiple adapters and tools.
Lifetime warranty with 24/7 customer support.
8.8Very Good
View offer on:
Show more
8
Powerbuilt50% OffPowerbuilt 14 Piece Master Tubing Service Kit, Cutting, Bending, Flaring Metal Tubes, HVAC, Car Repair, Plumbing, Electrical Tool Set - 948006
8.0 Simple to use8.0 worth the money8.0 lasts a long timeWhy we love it
DIY pro kit
Auto, HVAC, plumbing
5/8 OD tubing range
8.6Very Good
View offer on:
Show more
9
EastwoodEastwood Steel Tube Pipe Bender Tool Tubing Bender Plier And Brake Line Forming Pliers Kit
Main highlights- When You Can Bend Tubing in.Kink-Free in., You Avoid Wasted Time And Money
- Pliers And Bender Both Bend 3/16 in. And 1/4 in. Tubing
- Comfort-Grip Vinyl Handles
- Bender Also Works On 5/16 in. And 3/8 in. Tubing
- Aligns, Bends And Adjusts
8.5Good
View offer on:
Show more
10
Capri ToolsCapri Tools 3/16 in. Double Flaring Tool Kit for Brake Lines 3/16" SAE (4.75 mm) with Wrenches, Tube Cutter, and Tube Bender
Main highlights- Works flawlessly with 3/16 in. non-stainless steel, nickel, and copper tubing
- Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines
- Detachable die lets you also use with a bench vise
- Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for extension tool tube brake
